Saturday, September 17, 2011

Grain Processing Wood Powder Machine

1. Fibrous Material Wood Powder Pulverizing Machine
2.easy to operate
3.no dust,full enclosed
4.energy saving and ultra-fine
Grain ProcessingWood Powder Pulverizing Machine
I. Introduction to this Equipment
This equipment is featured with two processing-stages,twins chamber and two separate sealed circular wind routes in structure.The fineness of the product ranges 60-400mm.No waste gas discharged during process.Therefore,no pollution to the air and environment.
2. Process Principle
This equipment is a newly developed pattern of super-fine pulverizer adopting advanced technologies from home and abroad.It synthetized various pulverization principles of traditional pulverizers home and abroad and innovated through our expertscouragerous imagination and ingenious design,turned into a high efficiency-low cost pulverizer integrated with three pulverization principles.Equipped with fineness analyzer,it is a new pattern apecial equipment for the pulverization of knotty raw materials which are light,fibrinous,brittle or tenacious.Instead of traditional faw material feeding method,this equipment adopts inhale feeding method,thus avoid the shortage misfeeding metal chunk which may lead to serious damage to the pulverizer.It is exquisitly manufactured with high pricessing skills and cased with two layers between which water is filled to function as cooler together with a new material functioning as a noise insulator and heat disperser.Therefore,this equipment operates with low noise and without vibration.
3.Usage scope
Light body materials, fiber kind of material, the brittle material, toughness materials or other special difficulty crushing products
4.Technical parameter

Model
500
700
800
900
1000
1200
Output material size(mesh)
30-150
30-170
30-180
30-350
30-180
30-180
Output(kg)
30-200
100-300
160-500
80-600
220-600
240-800
Main engine rotating speed(r/min)
2900
2970
3200
3420
2970
2720
Motor power(kw)
22/4
30/2
30/4
37/4
55/4
75/4
Fan power(kw)
3/2
4/2
4/4
4/4
4/4
5.5/4
Machine weight(kg)
1500
2200
2800
3200
3800
4800



Welcome to visit our factory and test our machine,thank you!



Grain hammer mill

Technical parameters:
1. Power: 15kw
2. Net/Gross Weight: 490/560 KG
4. Capacity: 400-500 KG/H
Specification
Our hammer mill is the special milling equipment for materials of < 50 mm (diameter),< 300 mm (length), such as tree trimmings, wood pieces, crop stalks, rice husk, cotton stalk, cottonseed skins and so on. This hammer mill contains some rotors which are mounted by many hammers. The hammers swing following with the rotor at a high speed. And then the materials fed into a feed hopper are shred by the hammers. At last the materials are expelled out and sieved by the exhaust fan and screen.
Technical parameters:
1. Power: 15kw
2. Net/Gross Weight: 490/560 KG
4. Size of raw material: < 50 mm (diameter),< 300 mm (length)
5. Capacity: 400-500 KG/H

Granuling machine

1,Low cost,high profit
2,Save work force and power
3,Easy maitain and operate
Flat die pellet press is designed for raw materials and biomass that develop a new pellet press machine. It is available to process wood chips, straw, chaff, bamboo shavings, peanut shells, bagasse, alfalfa and other raw materials.
Performance Features:
1. Transmission gears made of high quality alloy steel, surface adopts carburizing and quenching treatment, precision machining by grinding, smooth transmission, low noise, large carrying capacity, low temperature rise, long life etc.
2. Spindle with a heavy thrust bearing, support axial force, long life.
3. Pellet press uses large diameter roller, big yield, pelletizing rate is high, uniform high strength pellets.
4. Roller and flat die wear peace deal, both sides can use the flat die, long service life.
5. All bearings are sealed structure that effectively prevent dust, improve the working bearings environment, extending bearing life.
6. Pellets diameter are from 6-12mm for user select.



Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
kL200B
3-phases 7.5kW
200-300
1000x430x950
200/230
With motor
kL200B
200-300
900x430x950

w/o motor
kL230B
3 phases 11kw
300-400
1140x470x970
290/320
With motor
kL230B
300-400
980x470x870

w/o motor
kL260B
3 phases 15kw
400-600
1200x500x1070
330/360
With motor
kL260B
400-600
1120x490x1070

w/o motor
kL300B
3 phases,22kW
700-800
1270x520x1070
410/450
With motor
kL300B
700-800
1170x520x1070

w/o motor
kL360
3-phases 22kW

1270x520x1070
470/500
With motor
KL360

1270x520x1070

w/o motor
KL400
3 phases,30KW
900-1100
1470x600x1150
550/585
With motor
KL400
900-1100
1470x600x1150

w/o motor

3D CNC Router For Wood With CE

3D CNC Router For Wood With CE
1300*2500*120mm
German ball screw and imported guide
double motors to drive machine
3D CNC Router For Wood With CE QL-1325-II

Product Features:
Axis under the control of software, high automation
High speed and efficiency, max. speed over 14m/m
High power spindle and good rigidity
No deformation and vibration after a long time work at high spee

Technical Data
Working Area
1300mm*2500mm*200mm
Table Size
1480mm*3000mm
Max. Speed
>20m/min
Processor
DSP/ Speed 100MHZ
Interface
USB
Command Code
G Code*.u00*.mmg*.plt
Working Software
DSP
Power (not including spindle)
1840w
Working Voltage
AC380V/50HZ
Spindle Power
3.0kw
Spindle Running Speed
0-24000rpm
Motor
Stepper


Granuling machine

1,Low cost,high profit
2,Save work force and power
3,Easy maitain and operate
All models above can process both animal feedstuff and wood pellet from sawdust. If you only use the machine to produce feedstuff, there are four smaller models for your reference as follows:



Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
ZLSP120
3kw 3-phases or 2.2 kw single phase
75-100
710x390x910
80/100
With motor
ZLSP120
75-100
670x390x910

w/o motor
ZLSP120A
8hp diesel

75-100
730x320x670

w/o diesel
ZLSP120A
75-100
900x440x730
120/140
With diesel
ZLSP150
4kw 3-phase
90-120
750x350x650
95/115
With motor
ZLSP150
90-120
700×350×650

w/o motor

Grinding Hammer Mill

Technical parameters:
1. Power: 18.5kw
2. Net/Gross Weight: 490/560 KG
4. Capacity: 700-900 KG/H
Specification
Our hammer mill is the special milling equipment for materials of < 50 mm (diameter),< 300 mm (length), such as tree trimmings, wood pieces, crop stalks, rice husk, cotton stalk, cottonseed skins and so on. This hammer mill contains some rotors which are mounted by many hammers. The hammers swing following with the rotor at a high speed. And then the materials fed into a feed hopper are shred by the hammers. At last the materials are expelled out and sieved by the exhaust fan and screen.
Technical parameters:
1. Power: 15kw
2. Net/Gross Weight: 490/560 KG
4. Size of raw material: < 50 mm (diameter),< 300 mm (length)
5. Capacity: 700-900 KG/H

HARDBOARD LINE

The hardboard line is to process small dia. branch or falk of tree , board skin, board edge etc wood waste or logging waste (dia
The hardboard line is to process small dia. branch or falk of tree , board skin, board edge etc wood waste or logging waste (dia. bigger than 4 cm) to make wet process hardboard . The final products are 1220
×
2440
×
2.5~4.5mm. The design capacity is 30 t per day and density of hardboard is 800-1000kg/m
3
.
The static bending intensity of hardboard is 300-400kg/cm
2
.
Water absorbing rate of hardboard is 20-30% and moisture content of hardboard is 5%-12%

HBS450N NEW STYLE 18&quot; WOODWORKING BANDSAW

bandsaw, band saw, woodworking machine, sawing machine
HBS450N
01) Motor: 2,200W motor with brake function
02) Blade size: 3,405 x 20 x 0.6mm
03) Table size: 540 x 485mm
04) Table tilt: 0 to 45 degrees
05) Cutting width: 460mm
06) Cutting depth: 280mm
07) Net/gross weight: 230/270kg
08) Packing size: 1,910 x 550 x 830mm
09) Units per 20-foot container: 20

*
670*485mm bigger working table optional.

Main features:

a) New slope shape
b) Quick clamping lever and blade tension adjustment on the back of the machine.
c) Precise and simple adjustment of the cutting height and the upper blade guide using large-size handwheels and a rack system.
d) Both upper and lower blade guide are molded on bearings for improved performance and extended blade life.
e) Two windows to show the belt tension and blade running position.
f) Smooth and flexible to tilt the working table
g) Quick change big aluminum rip fence.

HC Four roller glue spreading machine

glue spreading machine
1.environmental protection
3.gluing evenly
4.simple and beautiful structure
5.stable performance

HC Four roller glue spreading machine

glue spreading machine

This
glue spreading machine
is suitable for furniture production,woodworking factory,plywood,veneer board,chipboardgluing ,etc.
1.it is fit fou large area material gluiing.
2.save glue,won"t cause waste .
3.glue evenly ,don"t drop glue ,don"t leak,cut glue quickly and neatly.
4.adoption of imported motor,good working performance.

MAJOR TECHNICAL PARAMETERS

ITEM NO
DESCRIPTION
UNIT
SPECIFICATION:HC4-120/HC4-140
1
DIAMWTER OF GLUE-COATING ROLLERS
(MM)
260/260
2
LONGTH OF GLUE -COATING ROLLERS
(MM)
1200/1400
3
DIAMETER OF UPPER GLUE SQUEEZING ROLLERS
(MM)
220/220
4
DIAMETER OF LOWER GLUE SQUEEZING ROLLERS
(MM)
160/160
5
MOTOR POWER
KW
2.2/2.2


HC hot plate

1.good appearance
2.high quality
3.high durability
4.reliable performance
5.appliable to plywood,veneer board,particleboard
HC Hot press plate,heat plate

hot press plate

This
hot press plate
is suitable for medium density compressor,plywood compressor ,particleboard compressor,flat plate vulcanizing press machine ,electric heating platen ,etc .It is an indispensa ble part of thermal -pressing machine products .

MAJOR TECHNICAL PARAMETERS
ITEM NO
DESCRIPTION
UNIT
SPECIFICATION
1
FLATNESS TOLERANCE
(MM)
0.05+0.05/1000•L
2
PARALLELISM TOLERANCE
(MM)
0.05+0.05/1000•L
3
SURFACE ROUGHNESS
MICRON
1.6
4
SURFACE TEMPERATURE EVENNESS TOLERANCE
DEGREE
3
5
AROUND WELDS HYDRAULIC PERCOLATIONlESS
(KG/CM)
25




HCM-120T woodworking machine/finger-joint board/light side press machine

press machine
1.professional manufactuer
2.high efficiency and stability
4.appliable to finger-joint board
5.ISO9001:2008
HCM-120T light side press machine

press machine

The
press machine
consists of principal machine ,side press machine ,cylinder assembly,hydraulic station ,steam piping entering and exiting system and electrical cabenit and so on .
Principal machine: is a framed tructure,made up of upper tray ,medium tray ,lower tray ,has high strength and good rigidity .Hot plate is between the upper and medium tray ,the serpentine inside the hot plate drilling heats the hot plate evenly by the steam .the feet and stepped plates on both side of hot plates can support the hot plate and guid the plate .
Lateral pressure device:It is fixed on both side of framework,tightening the framework.
Lateral compressor :It control advancing and retreating function.
Master cylinder :assembly fixed on the lower tray connected by circular flanges and bolts,to ensure tightness of the cylinder.
1.This machine is widely used and can make several kinds of man-made boards,such as veneer sheets,chipboards ,plywood and insulating boards ,with different pressure.
2.with advantages of small pressure loss,large flow,low failure rate,and convenient maintenance,the domestic advanced cartridge value structure has been employed in hydraulic system .
3.The machine works in boths manual and automatic manners .
4.it is good in frame ,safe in operation,etc

MAJOR TECHNICAL PARAMETERS
ITEM NO
DESCRIPTION
UNIT
SPECIFICATION
1
MAIN CYLINDER PRESSURE
KN
1200
2
SIDE CYLINDER PRESSURE
KN
120
3
WORKBENCH WIDE
(MM)
1300*600
4
LAYER

6
5
OPENING
(MM)
80
6
MAIN CYLINDER PISTON DIAMETER
(MM)
220
7
MAIN CYLINDER NO
PIECE
1
8
SIDE CYLINDER TYPE/QUANTITY

30-100MM*12
9
CLOSING TIME OF MAIN CYLINDER
S
NO MORE THAN 30S
10
SIDE PRESSURE TIME

NO MORE THAN 3S/LAYER
11
HEATING MEDIUM

SATURATED STEAM
12
LOW PRESSURE PUMP FLOW

53L/MIN
13
HIGH PRESSURE PUMP FLOW

12L/MIN
14
SIDE PRESSURE PUMP FLOW

12L/MIN
15
MAIN CYLINDER OIL PRESSURE
MPa
31.5
16
SIDE CYLINDER OIL PRESSURE
MPa
14
17
TOTAL MOTOR POWER
KW
7.5
18
STRUCTURE

FRAME
19
CLOSED ACTION
S
NO MORE THAN5S

HCM-500Twoodworking machine/finger jonit board/ synchronous lateral heat press machine

Hydraulic hot press machine
1.professional manufactuer
2.high efficiency and stability
3.reliable performance
4ISO9001:2008
HCM-500T synchronous lateral heat press machine

heat press machine,plywood machine,woodworking cnc machine

1,stable work, also closed, make product profile glue together properly.
2 ,and PLC programmable control components and equipment to full automation.
3, a wide range of products, processing thickness 6-50mm.
4.The four sides of up, down, right and left close simultaneously, lending more powerful side gluing strength to the product.

The host machine features a framework integrated with upper tray, middle tray and lower tray. The host machine boasts powerful rigid and strength. Hot plates with snake-shaped tunnels are set between the upper and middle trays for an even heating of the surface by steam. The support feet and ladder plates can bear the hot plate and work as a guiding. With a simultaneous-close set, the hot plates in the machine can be closed at the same time. Thanks to the adjustable pull rod, the separation distance error can be corrected. Side-pressing units are fixed in both sides of the frame to compress the sides tightly. The oil tank synchronization set make the side-pressing units move forward and backward with the oil tank at the same time.

HCN-400T Multilayer frame type hot press machine

Hydraulic hot press machine
1.professional manufactuer
2.high efficiency and stability
3.reliable performance
4.ISO9001:200

HCN-400T Multilayer frame type hot press

hot pres machine

This
hot press machine
consists of host department ,oil cylinder assembly ,hydraulic perssure station and steam system ,electronic control system component mainframe.
1.The main frame adopts superior international steel plate with a simple structure and resonable design high rigidity ,strength and good bearing capacity .
2.Full range of model and specification ,customers can appoint what you like .
3.The hydraulic pressure control system adopts imported hydraulic parts ,with rapid compression and excellent in efficiency.
4.Our equipments is the main machine for the production of plywood ,particle board and decorative sheet.
5. Low motor power and quick ,power-free falling of hot platens save power consumption and decrease production cost .
6.The foundation is simple ,with low investment .

MAJOR TECHNICAL PARAMETERS


ITEM NO
DESCRIPTION
UNIT
SPECIFICATION
1
PRESSURE
KN
4000
2
HOT PRESSBOARD BREATH
(MM0
2100*1050
3
LAYERS
LAYER
12-16
4
OPEING
(MM)
78
5
PLUNGER DIAMETER
(MM)
280
6
PLUNGER NO
PIECE
2
7
PLUNGER STROKE
(MM)
1000-1280
8
CLOSING TIME
S
30
9
HEATING MEDIUM

SATURATED STEAM
10
LOW PRESSURE PUMP FLOW
L/MIN
230
11
LOW PRESSURE PUMP PRESSURE
MPa
16
12
HIGH PRESSURE PUMP FLOW
L/MIN
36
13
HIGH PRESSURE PUMP PRESSURE
MPa
31.5
14
TOTAL MOTOR POWER
KM
15

HCN-400T multi-layer Pillar-type hot press machine

1.For multipurpose and wide application in wood-based panel industry,specially for plywood manufacture.
2.high efficient
HCN-400T multi-layer Pillar-type hot press machine

hot press,woodworking machine,hydraulic hot press machine

1.The automatic electric apparatus is easy and reliable in operation,and the automatic temperature and time control ensures the quality of products.
2. The hydraulic circuit is composed of integrated blocks and compact in structure,ensuring accurate and reliable action of the system.
3.The steam system is designed as a "double entering and double exiting"arrangement to ensure even temperature distribution in hot platens.
4.Low motor power nd quick, power-free falling of hot platens save power consumption and decrease pr-oduction cost.
5.The foundation is simple, with low investment.

MAJOR TECHNICAL PARAMETERS


ITEM N0
DESCRIPTION
UNIT
SPECIFICATION
1
NOMINAL GROSS PRESSURE
(Tons)
400
2
NORMAL OIL PRESSURE
Mpa
21
3
DIMENSION OF HOT PLATENS
(mmL×mmW×mmH)
1050×2100×42
4
DISTANCEEN HOT PLATENS
(mm)
78
5
NUMBERS OF HOT PLATENS
(p.c.)
4-21
6
NUMBERS OF DAYLIGHTS
(slice)
3-20
7
CYLINDER
(mm)
320×2
8
STROKE OF CYLINDER
(mm)
240-1600
9
CLOSING TIME
(S)
<15
10
FALLING
(S)
<15
11
MOTOR OF HYDRAULIC CENTERFOR LOW PRESSURE PUMP
(KW×P)
11×4
12
MOTOR OF HYDRAULIC CENTERFOR LOW PRESSURE PUMP
(KW×P)
7.5×4
13
OVERALL DIMENSIONS
(mmL×mmW ×mmH)
2600×1050*3800 (15Layers)
14
NET WEIGHT
(Tons)
23-30





3D CNC rotary carving machine (want agent)

cnc router wood carving machine
spinle power: 0.8,1.5,2.2kw
capacity: 60 sets/month
Perfect after-sales service
We guarantee the machine for one year and the customers all over the world has a good remark on our after-sale service
1CE&ISO&FDA certification
2Perfect after-sales service
3our machine is special produce for Europe market
4 High precision with reasonable price
5Human design strong features and easy to use



CNC rotary carving machine
1. This machine adopt fixed gantry structure, matching imported ball screw, precision dividing head, large grip diameter, and can be adapted to different specifications of cylindrical material.
2. Using of advanced DSP control system, handle operation, large-screen display, more convenient, easier to maintain.
3. Using a unique intelligent prediction algorithm, give full play to drive potential, high-speed processing, curve and linear synchronous, the curve is more smooth.
4. Large-capacity storage, which can save 30 processing files, selection any files to process at random.
5. With Break point and break knife continue carving capabilities to address customer worries.
6. high Compatibility, compatible Type3/Artcam/CAXA/UG/Pro-E/Mastercam / Wentai ect..
Applicable industry >
This machine is suitable for processing cylindrical objects, such as cylinder furniture accessories, pen container, stair handrails, cylindrical instrument, other cylindrical craft.
Technical parameters >
Model
SH-2010
Max length
200mm 1000mm 1000mm
Diameter
¢ 80mm, ¢ 160mm, ¢ 200mm
The max engraving speed
4500mm/min 6000mm/min 6000mm/min
Spindle motor
800W/1500W/2200W,Frequency conversion and Water-cooled motor
Spindle speed
0-24000rpm/min
Tool
¢ 3.175/6mm
File Format
G-code/HPGL
Voltage
220V/50HZ


HCN-500T multi-layer frame-type hot press machine,hydraulic machine

hot press machine
1.professional manufactuer
2.high efficiency and stability
3.ISO9001:2008
4.fit for man made board

HCN-500T multi-layer frame-type hot press machine,hydraulic machine

hydraulic hot press
The hot press, short name of the hydraulic pressure (plant) thermal-heating press machine, is the equipment for a quick processing of gluing objects. As for gluing of the plywood or boards, two or more pieces of boards can be closely glued through the hydraulic pressure. Then, by heat transfer of the heat source high temperature between layers, the glue will be soon solidified and the product will be shaped. The common heat source can be boiler steam, electric heat, cycling oil heat, high frequency heat, etc.
1. This machine is widely used and can make several kinds of man-made boards, such as veneer sheets, chipboards, plywood and insulating boards, with different pressures.
2. With advantages of small pressure loss, large flow, low failure rate and convenient maintenance, the domestic advanced cartridge valve structure has been employed in the hydraulic system.
3. The domestic advanced programmable controller (PC) has been employed in the electric part, which performs actions of soaring, pressure applying, pressure maintaining, pressure complementing, delaying, return stroke, etc. 4. The machine works in both manual and automatic manners. The machine possesses features of high reliability, low failure rate and convenient maintenance. The hot press produced by our company possesses many advantages, such as compact structure, easy operation, high durability, reliable performance, etc.

MAJOR TECHNICAL PARAMETERS

ITEM N0
DESCRIPTION
UNIT
SPECIFICATION
1
NOMINAL GROSS PRESSURE
(Tons)
500
2
NORMAL OIL PRESSURE
Mpa
21
3
DIMENSION OF HOT PLATENS
(mmL×mmW×mmH)
1050×2100×42
4
DISTANCEEN HOT PLATENS
(mm)
78
5
NUMBERS OF HOT PLATENS
(p.c.)
4-21
6
NUMBERS OF DAYLIGHTS
(slice)
3-20
7
CYLINDER
(mm)
320×2
8
STROKE OF CYLINDER
(mm)
240-1600
9
CLOSING TIME
(S)
<15
10
FALLING
(S)
<15
11
MOTOR OF HYDRAULIC CENTERFOR LOW PRESSURE PUMP
(KW×P)
11×4
12
MOTOR OF HYDRAULIC CENTERFOR LOW PRESSURE PUMP
(KW×P)
7.5×4
13
OVERALL DIMENSIONS
(mmL×mmW ×mmH)
2800×1050*3800
14
NET WEIGHT
(Tons)
23-30






HCTwo roller middle plate gluing machine

1.has two rollers
2.environmental protection
3.middle plate gluing evenly,simpleand beautiful structure
4.stable performance
HC Two roller middle plate gluing machine

gluing machine,glue spreader,glue machine for plywood


This
gluing machine
is suitable for furniture production,woodworking factory,plywood,veneer board,chipboardgluing ,etc.
1.it is fit fou large area middle plate gluiing.
2.save glue,won"t cause waste .
3.glue evenly ,don"t drop glue ,don"t leak,cut glue quickly and neatly.
4.adoption of imported motor,good working performance.

MAJOR TECHNICAL PARAMETERS

ITEM NO
DESCRIPTION
UNIT
SPECIFICATION:HC2-120/HC2-140
1
DIAMWTER OF GLUE-COATING ROLLERS

(MM)
310/310




2
DIAMETER OF UPPER GLUE SQUEEZING ROLLERS
(MM)
1000/1200




3
MOTOR POWER
KW
2.2/2.2


HD series CNC Wood Router

HD series CNC Wood Router
A.PMI Guide Rail-Maintance Free
B.Germany Ball Screw
C.Large Prcoessing Area
D.4.5KW HSD Spindle
HD series CNC Wood Router Technical Parameters:
1) Machine body: whole wheel
2)Driving mode:Gear wheel
3) Work dimensions: 1500*3000mm
4)Body dimensions:1680*3500mm
5) Z-axis working area: 200mm
6) Software: type 3 software, Artcut software, Artcam software
7) Power source: AC380/50Hz
8) Driver type: stepper motor
9) Memory: 128MB or without
10) Spindle: 4.5KW air-cooled or water cooled
11) Spindle speed: 0 - 24,000rpm
12) Control system:DSP (USB interface)
13) Command: G code, u00, mmg, plt
14) Running circumstance temperature: 0 - 45°C
15) Relative humidity: 30% - 75%


HD series CNC Wood Router Features:
A. Imported ballscrew, long life time, high precision for cutting.
B. Vacuum table, no oil vacuum pump, high suction, more convenient, stable capability.
C. High speed motor and drivers, two motors for Y axis. Max speed is 35m/min. Auto aligning System.
D. Adopting advanced DSP system, operated with the handle, convenient operation, humanization design. Air cooling spindle highly upgrade the processing speed.
E. Unique intelligent budget principle, fully develops the potential of the motor and lead to high processing speed, the synchronization of cures and straight lines, smoother curves.


HD series CNC Wood Router Configuration:
1.Whole steel structure, imported square orbit, German ball screw for z axis, gear-wheel for x axis and y axis,
2.U flash disk DSP control system, new DSP controller, operate with handle. Wentai Software and Type3 Software.
3.4.5KW air cooling spindle, vacuum table with 6 zones separately control,
4. No oil vacuum pump and dust collector system , dust cover, Auto oiling,
5.Adopt high speed stepper motor


DETAILS
:

HD series CNC Wood Router Applications:
Can be used for advertisement engraving, advertisement cutting, stone processing Cutting, molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment molding processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.

In addition, we have woodworking engraver, relief engraver, cylinder craft wood engraver, special mould engraver, stone engraver, advertising machines, laser engraving/cutting machines and so on.

we can make carving machines with all specifications to meet users.
SAMPLE:


HD-1212 CNC Advertising machine

CNC Advertising machine HD-1212
1.DSP control system
2.3x1.5kw water cooling spindle
3.Stepper motor
4.T-slot aluminium tabl
HD-1212-T CNC Advertising machine,CNC Router machine

Standard configurations:

1.Whole Steel structure, imported Taiwan linear square orbit, gear rack for XY axis, German ball screw for Z driving.

2.Advanced DSP control system. Wentai Software and Artcam Software,

3.High frequency 1.5kw water cooling spindle.

4.Adopt high speed Stepper motor,high power driver,Taiwan Inverters.

5.Dust cover,auto-oiling system,auto-aligning system.

6.10 cutters and 2 collect(6mm,3.175mm)

Specifications:
1. Taiwan high precision Linear guide rail, the bearing of the lead guide rail is face to face. high-precision linear guide rail of CNC equipment manufacturers use some of the ordinary life of the 2200-Advisory times, long-term use of high accuracy.

2. High-speed stepper driver, faster than the original model, up nearly two meters. X-axis adopt popular no dust structure, effectively guaranteed the long-term operating performance of the mechanical aspects.

3. The compatibility is high; compatible Type3/Artcam/Castmate/Corelerow/Wentai,and other CAD/CAM software, which can produce exquisite relief, video sculpture, three-dimensional art works.

4. Dual-motor driver, a unique dual-axis drive, large strength, transmission smoothly, high-speed ensure for long time and guarantee no distortion.

Technical parameters:
Model
HD-1212-T
XY working area
400X1200mm(each head)
Z working area
200mm
Table size
1380x1500mm
Max feeding
25m/min
Work-holding
By T-slot
Processor
DSP/Frequency 100MHz
Interface
USB
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/XP
Power(not include the spindle)
2000W
Working voltage
220V/50HZ
spindle power rate
3x1.5KW (water cooling spindle)
spindle rotating speed
0-24000rmp/min
Drive motor
Stepper

Samples:







HD-1325 Wood furniture CNC Engraving machine

CNC Engraving machine1325
1.No oil vacuum pump
2.Stepper motor,dust cover
3.4.5kw water cooling spindle
4.DSP control system
HD-1325 Wood furniture CNC Engraving Machine

Standard specifications:
1.Whole Steel structure,Taiwan HIWIN linear square orbit, gear rack for X Y axis,Germany ballscrew for Z driving.

2.Advanced DSP control system.Wentai Software and Artcam Software.

3.4.5kw Italy HSD brand air cooling Spindle.

4.Adopt high speed Servo motor,two motors for Y axis,highly upgrade the processing speed of the machine.

5.5.5kw no oil vacuum pump,vacuum table with 6 vacuum zones.Taiwan Delta inverters,high power drivers.

6.3.0kw dust collector system,dust cover,Auto oiling system,auto aligning.

7.10 cutters and 2 collett(3.175mm,6mm,12.7mm)

Technicial parameters:
Model
HD-1325
XY working area
1300X2500mm
Z working area
200mm
Table size
1440x3040mm
Max idling
>45m/min
Max feeding
>35m/min
Work-holding
By suction
Processor
DSP/Frequency 100MHz
Interface
USB
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/XP
Power(not include the spindle)
1850W
Working voltage
380V/50HZ
spindle power rate
4.5KW (water cooling spindle)
spindle rotating speed
0-24000rmp/min
Drive motor
Stepper(or servo)

High-end configurations:







High precision Samples:







HD-1325 Woodworking CNC Router

CNC Router 1300x2500x200mm
1.4.5kw water cooling spindle
2.Whole steel structure,
3.Taiwan square orbit
4.DSP control system
Woodworking CNC Router HD-1325
Equipment features:
1.WholeSteel structure, Taiwan square orbits.
2.Imported ballscrew for z axis, high precision.gear-wheel for x axis and y axis,working steadily.
3.Advanced DSP control system, easy to operate with handle.
4.Well designing software:Wentai Software and Type3 Software,.
5. 4.5Kw water cooling spindle(imported bearing).
6.20 cutters(φ3.175, φ4, φ6), 3 collets
Technical Parameters:
Standard Configurations:
Model
HD-1325
XY working area
1300X2500mm
Z working area
200mm
Table size
1440x3040mm
Max idling
>30m/min
Max feeding
>20m/min
Work-holding
By clamp
Processor
DSP/Frequency 100MHz
Interface
USB
Command
G code*.u00*.mmg*.plt
Surroundings for software
Windows98/2000/XP
Power(not include the spindle)
1850W
Working voltage
380V/50HZ
spindle power rate
3.0KW (air cooling spindle)
spindle rotating speed
0-24000rmp/min
Drive motor
Stepper

1.Whole Steel structure, Taiwan linear square orbit, gear rack for X Y axis, Germany ball screw for Z driving.

2.Advanced DSP control system. Wentai Software and Type3 Software.

3.3.0kw air cooling Spindle made in China.

4.Adopt high speed Stepper motor, two motors for Y axis, highly upgrade the processing speed of the machine.

5.3.0kw dust collector system, dust cover, Auto oiling system, auto aligning.

6.20 cutters and 3 collect(3.175mm,6mm,12.7mm)

HDM25-H ATC CNC Router with Automatic Tool Change

ATC CNC Router
1.Automatic tool changer
2.Yaskawa Servo motor
3.Italy ATC air cooling spindle
4.Taiwan Syntec control syste
HDM25-H Wood CNC Router machine with Automatic tool changer.ATC

Standard configurations:
1.Whole steel structure, imported Taiwan square orbit, German ball-screw for Z axis, gear-wheel for X axis and Y axis.

2.Adopt Taiwan SYNTEC control system,Wentai Software and Type3 Software.

3.4.5KW Italy air cooling spindle, vacuum table with 6 vacuum zones, separately control.

4.5.5KW No oil vacuum pump from Germany and dust collector system , dust cover, auto aligning system, Auto oiling.

5.Adopt high speed Japan Yaskawa Servo motors and drivers, Taiwan Inverters, high power.

6.12 cutters( φ6, φ12.7), 3 collets

Technicial parameters:
Model
SKM25
XY working area
1300X2500mm
Z working area
300mm
Table size
1480x3000mm
Max feeding
60m/min
Work-holding
By Suction
Vacuum performance
230 L/h
The Number of Knife
8 Pcs
Command
G code*.HPGL
Resolution
0.025mm
Power(without spindle)
4000W
Working voltage
3Ph/380V/50Hz
Spindle power rate
9.0kw(Italy air cooling spindle)
Spindle rotating speed
0~24000rmp/min
Drive motor
Servo(Japan Yaskawa )

Applied areas:

Panel furniture,Mahogany furniture,Solid wood door,decoration material,Stone Arts etc.

Applicable materials:
Wood, bamboo, jade, organic glass, plastic, Acrylic, Aluminum,Copper,Stone etc.

Applicable industries:
Woodworking, advertisement, arts and crafts, model , building upholster, decoration.

Configurations









Samples:









HDM25-X CNC Woodworking Machine

CNC Woodworking machine HDM25-X
1.Stepper motor
2.5.5kw no oil vacuum pump
3.4.5kw air cooling spindle
4.DSP control system
HD-1325 CNC Woodworking machine

1.
Whole Steel structure, imported square orbit, ballscrew for z axis,
gear-wheel for x axis and y axis


2.
Advanced u flash disk DSP control system,

Wentai Software and Type3 Software

3.
Adopt 4.5KW air cooling spindle
,
vacuum table with 6 zones
separately control,
no oil vacuum pump


4
.3.0kw Dust collector system , dust cover,
10 cutters( φ6, φ12.7), 2 collets

5.
Well compatbility:CAD/CAM designing software,Type3/Artcam/Castmate/Wentai
etc.

6.
High speed Stepper motor and drivers,two motors for Y axis,the max speed is 35m/min,highly upgrade the processing speed.



Technical parameters:
Model
HD-1325
XY working area
1300x2500mm
Z working area
200mm
Table size
1480x3000mm
Max feeding
>35m/min
Work-holding
By suction
Processor
DSP/Frequency 100MHz
Interface
USB
Command
G code*.u00*.mmg*.plt
Surroundings for software
DSP
Power(not include the spindle)
1840W
Working voltage
AC358V/50Hz
Spindle power rate
4.5KW(air cooling)
Spindle rotating speed
0-24000rpm/min
Drive motor
Stepper

High configurations and good-precision samples




























HEIGHT ADJUSTABLE MITRE SAW TABLE STAND

Height Adjustable Table Stand 26503
2)N/.W.:18/20kgs
3)Max. capacity:80kgs
4)Meas.:1020*650*160
HEIGHT ADJUSTABLE MITRE SAW TABLE STAND ,MITRE SAW STAND ,STAND,TABLE,SAW STAND,TABLE SAW,WOODWORKING TOOL
MODEL 26503
TABLE SIZE(mm) 600×480
OPERATION HEIGHT MIN/MAX(mm) 750-1050
OPERATION LENGTH MIN/MAX(mm) 650-1440
N.W./G.W.(kgs) 18/20
MAX.HOLDING WEIGHT(kgs) 80
MEASUREMENT(mm) 1020×650×160
UNITS/20" CONTAINER(PC) 227
Powder coated finish.
Ideal for use with table saw,drill presses and other shop machines.
We are a manufacurer for woodworking machinery and extensive experience in product development, professional engineering, technical and management personal.

HF board jointing machine

HF board jointing machine (CGPB-46T) which adopts high frequency heating ,PLC controlled.

HF board jointing machine (CGPB-46T) which adopts high frequency heating ,PLC controlled ,works automatically , working size 2500×1300mm, working thickness 10-80mm,uppper pressure 13T, back pressure 33T, feeding mode is autom, widely used in splicing of integrated materials ,assembly of surface of dinning or conference table ,meanwhile we can desing the machine according clients'needs.

Features of HF board jointing machine

1.Assembled plate is high in planeness and quality , exempt of moisture content;
2.Fast in speed, only 1~3 minutes per piece;
3.Convenient handling and low labor intensity;
4.Much higher efficiency than general plate splicing machine during winter;
5.Selective heating,glue line is heated , lower heating in timber, energy saving, less distortion.
6.Assemble varieties of materials such as soft and hard article Board, medium density fiber board, etc.
7. Bug-killing and sterilization;

3D Scanner XL3DS-L1

Applicable to Mould Design, Fine Model Scanning,Reverse Engineering,3D Inspection, Toy&Arts Design and Scan, big size scan
With Shining 3D Scanner, you can scan big car to small teeth!
Shining 3D Scanner
is a precise optical 3D scanner, designed and produced by Hangzhou Shining 3D tech Co., Ltd. It has unique and streamline design, customers can make fast three-dimensional scanning from any direction, can achieve fully automatic combination, it can be applicable to measuring any size of models, which makes it to be the absolute tool for reverse engineering design and 3D online testing and can be used in the field such as mould design, fine model scanning, toy and art deign and etc.
Advantages:

1. High Efficiency: adopt the one-sided scan technology, high speed (Single scan time less than 5s)
2. High Accuracy: use the unique calibration technique can get high measure accuracy to ensure the precision of the overall combination.
3. High Resolution: high-performance measurement camera can get higher density cloud point data at one time, so that the scanned details are clearly visible.
4. Maintenance Free: the lifetime of the lamp which is in the projection module is 20,000 hours, normally, the scanner can be used for many years.
Technical Specification:


Model Type: Shining3d XL3DS-L1

Single
Scan Range
(mm): 400*300(adjustable);
Operating Distance (mm): 900-750;
Feature Accuracy (mm): 0.04-0.02;
Resolution (mm): 0.3-0.2;
Scannable Object Size: >500mm-1500mm;
Scanning Type: Non-Contact, white light (Without Laser);
Digitization: 1280*1024/1.3 mega pixels;
Data Interface: ASC, STL;
Acquisition Time: <5S;
Align Type: Auto Align;
Weight: 5.6kg;
Dimension (mm): L380*W260*H110;
Working Environment: Under any light condition;
USB: 2.0 (at least three interface);
PC System: Window XP, 32 bits.

HF drying machine

1.High frequency vacuum dryer
2.3, 4, 6, 10 cubic meter
3.HF fast heating
4.Vacuum minus pressure
5.JYE-18 years experience
High frequency vacuum dryer (timber dryer)

1. It is new drying mechod.(Dielectric heating)

Steam and normal vacuum dryer(hot plate) is conductive heating.
They dry the wood little by little from outside to inside.
High frequency is dielectric heating.
HF wave can penetrate the thick wood
and dry it uniformly. Even the core of wood temperature is heater than surface.

Vacuum condition: It is minus pressure, safe.
the wood moisture can voparized in low temperature.
Then vopar will be pump out automatically.
So
HF cacuum dryer is more than 10 times
faster
,
more uniform, no bending
and
no crack
caused by non-uniform.


2. No need boiler; No need hot plate (no hot water)
The power supply of HF vacuum dryer is electrcity.
It does not need boiler, save the human resourse and protect the enviroment.

3. Worm killing.
Capacity
3CBM
4CBM
6CBM
10CBM
Model
GJG-1.7-3-JY
GJG-1.7-4-JY
GJG-1.7-6-JY
GJG-1.7-10-JY
Power
AC 380V 50HZ 3phase 4wire
Output Power
30KW
40KW
50KW
80KW
Wood loading size
H1000xW1000xL3000mm (3CBM capacity)
H1000xW1000xL4000mm (4CBM capacity)
H1000xW1000xL6000mm (6CBM capacity)
H1300xW1300xL6000mm (10CBM capacity)
Oscillation frequency
6.78MHz
Max pressure
-0.09MPa
We also supply other machine:
1.
HIGH FREQUENCY CURVED PLYWOOD PRESS: P
lywood, MDF, HDF bending: office chair, sofa, bed elements, musical instrument and others
2.
HIGH FREQUENCY FRAME ASSEMBLY MACHINE (FOR 90 DEGREE ANGLE SOLID FRAME ASSEMBLING)
3.
HIGH FREQUENCY CABINET DOOR ASSEMBLER (FOR 45 DEGREE ANGLE PHOTO FRAME, CABINET DOOR FRAME ASSEMBLING
Solid wood frame assembling: door, window, photo frame, cabinet-door and other frame assembling
4
HIGH FREQUENCY VACUUM DRYER (FOR WOOD DRYING)
HF heating in vacuum condition. More uniform and 10 times faster than steam. No crack, bending, color-changing problem. Worm killing. No population (no boiler)
5
HIGH FREQUENCY EDGE GLUER (FOR FINGER JOINT BOARD JOINING)

HF1300(2300) hydraulic rounding-up machine

Enlarged single/double roller diameter enhence the rounding up speed.
Enlarged
single/double roller diameter
enhences the rounding up speed

Friday, September 16, 2011

HFM1400-2600 blade sharpener(casting)

HFM1400-2600 blade sharpener
Increased the pressure bar, on the chute, the machine feed more uniform,
HFM1400-2600-type sharpener
This series Grinder for peeling machine, paper cutter blade sharpening and other effects, it has a compact structure, attractive appearance, adjust the flexibility, easy operation and simple.
HFM1400-2600-type sharpener <weldment>
Model sharpening length (mm) grinding head travel speed of wheel speed (m / min) Weight (kg) with power (kw) Dimension (mm)
HFM1400-2600 1600 40 seconds / time 2800 600 4.0 2700 × 800 × 1100
Processing materials, peeling knife, paper cutting knives, and other normal or high speed steel

HFM1400-2600-type sharpener
This series Grinder for peeling machine, paper cutter blade sharpening and other effects, it has a compact structure, attractive appearance, adjust the flexibility, easy operation and simple.
HFM1400-2600-type sharpener <castings>
Model sharpening length (mm) grinding head travel speed of wheel speed (m / min) Weight (kg) with power (kw) Dimension (mm)
HFM1400-2600 1600 40 seconds / time 2800 600 4.0 2700 × 800 × 1100
Processing materials, peeling knife, paper cutting knives, and other normal or high speed steel


HFXQ-2C1400-300 NC no-chunk spindle veneer lathe

Main features: All steel wheels, exclusive use of the electromagnetic clutch, automatic footage.
Local high degree of automat
Main features
: All

steel wheels
,

exclusive use of

the electromagnetic

clutch
, automatic
footage
.
Local

high degree of automation
,

simple operation, saving

labor.
Electrical appliances

and fully equipped,

safe and reliable.
Equipment

selection
, material

scientific and rational
;

compact structure
, fine workmanship
.
Footage of

the local

machine
,

feed

accurate,

slab

thickness
, without

manual adjustment.
Using a large

gear
, cam

feed

structure, using

high-quality

steel,

durable.
Note:

If

the

processing size

models

can be

special

ordered

the special needs of

the user
.

HFXQ-2a1500-300

Of large tonnage proper design
antomatic cutting edge , flexible cutting space
Of large tonnage proper design
antomatic cutting edge , flexible cutting space

HFXQ1400-400 high-precion CNC no-chunk spindle veneer lathe

HFXQ1400-400 high-precion CNC no-chunk spindle veneer lathe
easily operation
professial and long-time in selling woodworkings
1.the machine adots the CNC screw footage ,operation is easy.
2.the diametris opening and maching reaches 400mm.
3.Movable blade , adjust the blade space automatically
.

HG-838-521 Bench Work

Bench Work
20years experience and 13 years cooperation with WOLF CRAFT
ensure strong develope ability and excellent qulaity.
Bench Work
HG-838-521

Specifications:
Overall dementions
1060x515x1505mm
Wok top size
1060x515x9mm
Drawer board size
515x483mm
Pig board size
1060x515x600mm
SPHC steel Leg
30x30x1.5mm
Loading capacity
250 kg
Net weight
45 kg

Packing details:

1.Packaging type:White box+color sticker/Color box
2.Inner pack quantity:N/A
3.Master carton quantity: 1PC
4.Measurement:111.5x58x90CM
5.N.W/G.W.: 33/34KG
6.Conveyance:
Qty/20'CTNR:430PCS
Qty/20'CTNR:735PCS

Trade Terms:
1.The Price is based on regular packing condition/MOQ/FOB Ningbo Or Shanghai.Can be discussed with different trade conditions;
2.Supply ability:4000pcs per month;
3.MOQ:quantity of a 20 FCL;
4.Payment : T/T Payment ,30% Deposit Before Production,Balance 70% Upon Receive the BL Copy

Delivery Lead Time:
30-35 days after receiving the 30% deposit or the L/C opened

Process Scheme:
Feed(in-house)-----Casting/Forging(in-house)-----Examination-----Machine Processing(in-house)-----Examination-------AppearancePolishing(in-house)-----Examination------Electro Plating/Powdering(sub-contracting)------Examination--------
Plastic injection------Examination-------- Assembling-------Examination-------Packing-------Delivery

If you have more requirement ,Please feel free to contact us by email or phone in any time !


Welcome to HG!!


HG-839 Work Table

This work table is our years routing model,2 containers out each month.20years experience in exporting garantee quality&service.
Work Table
HG-839

Specifications:
Overall size
1215x615x930mm
Work top&bottom size
1215x605mm
Drawer board
1200X600mm
SPHC steel Leg
32x32x1.5mm
Net weight
37kg
Loading capacity
150kg
Packing details:

1.Packaging type:White box+color sticker/Color box per pc
2.Inner pack quantity:N/A
3.Master carton quantity: 1PC
4.Measurement:126x66.5x7.5CM
5.N.W/G.W.: 37/39KG
6.Conveyance:
Qty/20'CTNR:400PCS
Qty/20'CTNR:843PCS

Trade Terms:
1.The Price is based on regular packing condition/MOQ/FOB Ningbo Or Shanghai.Can be discussed with different trade conditions;
2.Supply ability:4000pcs per day;
3.MOQ:quantity of a 20 FCL;
4.Payment : T/T Payment ,30% Deposit Before Production,Balance 70% Upon Receive the BL Copy

Delivery Lead Time:
30-35 days after receiving the 30% deposit or the L/C opened

Process Scheme:
Feed(in-house)-----Casting/Forging(in-house)-----Examination-----Machine Processing(in-house)-----Examination-------AppearancePolishing(in-house)-----Examination------Electro Plating/Powdering(sub-contracting)------Examination--------
Plastic injection------Examination-------- Assembling-------Examination-------Packing-------Delivery

If you have more requirement ,Please feel free to contact us by email or phone in any time !


Welcome to HG!!

HG-840 Work Bench

WorkBench is our years routine product
We've 20years export exp'&13years cooperation withWOLF CRAFTquality&service is advantage

HG-840 Work Bench

Specifications:
Overall dementions
815x608x930mm
Work top&bottom size
815x605mm
Drawer board size
800X600mm
SPHC steel leg
32x32x1.5mm
Net weight
26kg
Loading capacilty
150 kg

Packing details:

1.Packaging type:White box+color sticker/Color box per pc
2.Inner pack quantity:N/A
3.Master carton quantity: 1PC
4.Measurement:123x63x8CM
5.N.W/G.W.: 26/28KG
6.cONVEYANCE:
Qty/20'CTNR:403PCS
Qty/20'CTNR:855PCS

Trade Terms:
1.The Price is based on regular packing condition/MOQ/FOB Ningbo Or Shanghai.Can be discussed with different trade conditions;
2.Supply ability:4000pcs per day;
3.MOQ:quantity of a 20 FCL;
4.Payment : T/T Payment ,30% Deposit Before Production,Balance 70% Upon Receive the BL Copy

Delivery Lead Time:
30-35 days after receiving the 30% deposit or the L/C opened

Process Scheme:
Feed(in-house)-----Casting/Forging(in-house)-----Examination-----Machine Processing(in-house)-----Examination-------AppearancePolishing(in-house)-----Examination------Electro Plating/Powdering(sub-contracting)------Examination--------
Plastic injection------Examination-------- Assembling-------Examination-------Packing-------Delivery

If you have more requirement ,Please feel free to contact us by email or phone in any time !


Welcome to HG!!

HG-841 Workbenches

Workbench series is our years routine products,several containers out each month.Excellent quality&service is our strength.
HG-841 Workbenches

Specifications:
1.Product open size:1500x700x915mm
2.
Wooden board
thickness: 34mm
3.Steel thickness:2.4mm
4.Loading capacity:150kg

Packing details:

1.Packaging type:White box+color sticker/Color box
2.Inner pack quantity:N/A
3.Master carton quantity:1PC
4.Measurement:153x74.5x8CM
5.N.W/G.W.: 26/28KG
6.Conveyance:
Qty/20'CTNR:276PCS
Qty/20'CTNR:577PCS

Trade Terms:
1.The Price is based on regular packing condition/MOQ/FOB Ningbo Or Shanghai.Can be discussed with different trade conditions;
2.Supply ability:4000pcs per month;
3.MOQ:quantity of a 20 FCL;
4.Payment : T/T Payment ,30% Deposit Before Production,Balance 70% Upon Receive the BL Copy

Delivery Lead Time:
30-35 days after receiving the 30% deposit or the L/C opened

Process Scheme:
Feed(in-house)-----Casting/Forging(in-house)-----Examination-----Machine Processing(in-house)-----Examination-------AppearancePolishing(in-house)-----Examination------Electro Plating/Powdering(sub-contracting)------Examination--------
Plastic injection------Examination-------- Assembling-------Examination-------Packing-------Delivery

If you have more requirement ,Please feel free to contact us by email or phone in any time !


Welcome to HG!!

3D Scanner XL3DS-VM

Applicable to Mould Design, Fine Model Scanning,Reverse Engineering,3D Inspection, Cartoon design, Art design, Custom-made goods
With Shining 3D Scanner, you can scan big car to small teeth!

Shining 3D Scanner
is one of the most advanced white light 3D measuring system. It adopts the raster scanning and auto-registration technology, carries out the scanning in a non-contact way. It is well known for its high efficiency, high precision, longevity, high resolution and ideal for the scanning and measuring of complex uneven surfaces, soft objects, easily wore moulds and samples. It is mainly applied in product R&D(3D measuring, 3D digitizing mould file, CAD design, CNC maching, rapid prototyping), reverse engineering and 3D inspection(CAV, CAE analysis).
Advantages:

1. High Efficiency: adopt the one-sided scan technology, high speed (Single scan time less than 5s)
2. High Accuracy: use the unique calibration technique can get high measure accuracy to ensure the precision of the overall combination.
3. High Resolution: high-performance measurement camera can get higher density cloud point data at one time, so that the scanned details are clearly visible.
4. Maintenance Free: the lifetime of the lamp which is in the projection module is 20,000 hours, normally, the scanner can be used for many years.

Technical Specification:

Model Type: Shining3d XL3DS-VM
Measuring Area by single Scan (mm): 300×250-100×75
Feature Accuracy (mm): 0.02-0.01
Resolution (mm): 0.2-0.08;
Scannable Object Size: <1500mm
Scanning Type: Non-Contact, white light (Without Laser);
Digitization: 1280*1024/1.3 mega pixels;
Data Interface: ASC, STL;
Acquisition Time: <5S;
Align Type: Auto Align.
Features: Switch back and forth between the scanning range, without re-calibration
Working Environment: Under any light condition
USB: 2.0 (at least three interface)
PC System: Window XP, 32 bits

Application

HGJ series wood drying machine (HGJ-I) with CE motor

wood drying machine
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc.
Wood drying machine

Introduction:
For raw materials with heavy moisture content that above 12%, you need to install a drier, this dry make the moisture content below 12% before further processing. This kind of dryer is Air Current type dryer which cost is lower than other type. This dryer is professionally designed for drying wood sawdust. It has advantages of low cost, low consumption, high capacity, etc. In addition, the round places of pipes can be changed to any angle which can solve plant dimension problems.

Raw materials:

wood block peamut shell

Wood drying machine:
This wood drying machine is suitabl
e for drying materials of moisture 30-60%. Wet material is input into the hopper. The wood drying machine is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer can reduces the moisture to 8-12% one time with the advantages of lower cost consumption and high efficiency.


Details of wood drying machine:


Technical date:

Model: HGJ-I
Power: 4 kw, 1 motor
Capacity: 300-400 kg/h
Diameter of feed materials: 1-5 mm
Working Temperature: Stove300°C / Pipes180-200°C
Consumption of wood waste:10-15 kg/h
Weight: 1000/1100 kg
Overall size: 7*2*4 m
Pack size: 1.5*1.06*1.1 m
2.44*1.22*1.55 m

Wood drying machine with motor:




HIGH PRECISION DOUBLE ROLLER COATING MACHINE

smooth, no wrinkle coating, energy-saving.
1. This machine is widely used for furniture, floor, MDF, door, artwork board and blinder coating.
2. The coating surface is smooth without wrinkle and has good saturation. Although the coating surface is very thin the coating effect can match curtain painting. It is more energy-saving.
3. The speed of transmission belt, plastic roller and electrical light roller can be adjusted by seprerate motor and frequency inverter.
4. The coating roller adopts quick-assemble structure with high precision for easy chaning. The height can be read on the counter.
5. This machines uses imported scraper, and the scraper angle can be adjusted by worm reducer. The distance between smooth roller and PU roller can be adjusted by worm shaft.
6. There are 5 frequency inverters or PLC can be used by each head seperately, which make the coating more accuracy.


MODEL

Working Width

Working Thickness

Minimum Length

Feeding Speed

Roller Power

Total power

Dimensions

Weight
620
620mm

2-80mm

300mm

5-18m/min.
0.75kw
3.75kw
1800mm*1750mm*1300mm
800kg
920
920mm
0.75kw
3.75kw
1800mm*2100mm*1300mm
1000kg
1320
1320mm
0.75kw
3.75kw
1800mm*2450mm*1300mm
1200kg

HIgh Features Wood Furniture Making Machine LY-1325

1.DSP control
2.Type3 software or Ucancam software
3.cauum table
4.high performance and accurance
This is a high quality models, with high confaguration and precision. Can engrave, cut and drill on wood, bamboo, acrylic, PVC and so on.

Widely used in wood making industries, cabinet door, waving board, no paint door, computer table and so on, also can engrave on Aluminium, Copper and iron.

This woodworking machine is economical type which with whole steel structure

1. The max speed is up to 35 meters/min, engraving speed is 25 meters/min

2. Adopting easy cooperated DSP control system, it is convenient to operate.

3. Unique intelligent budget principle make the motors offerring the high speed, so it could make the straight and smooth curves.

4. Double motors to drive Y axis

5. High strength steel tube jointing.

6. The table equipped with 6 divided vacuum zones.

7. Optional: auto tool CHANGER
Italy air cooling spindle
Germany oil-free vacuum pump

Technical Parameter:
NO. Description
Parameter
1
Table size
1480×3000mm
2
X,Y working area
1300×2500mm
3
Z working area
200mm
4
Max. speed
35m/min
5
Working Speed
25m/min
6
Resolution/ work delicacy
0.02mm
7
Repositioning Accuracy
0.05mm
8
Interface
USB
9
Command
G code*.u00*.mmg* plt
10
Surroundings for software
windows98/2000/xp
11
Control system
DSP control system
12
Power(spindle power is not included)
8.87KW
13
Working voltage
AC380V 50Hz
14
Spindle power (domestic made)
4.5KW water cooling spindle
15
Spindle rotating speed
0-24000rpm/min
16
Motor
Stepper


HIgh Features Wood Furniture Making Machine LY-1325

1.China domestic water cooled spindle
2.new DSP control system
3.Type3 Software or Ucancam Software
This is a high quality models, with high confaguration and precision. Can engrave, cut and drill on wood, bamboo, acrylic, PVC and so on.

Widely used in wood making industries, cabinet door, waving board, no paint door, computer table and so on, also can engrave on Aluminium, Copper and iron.

This woodworking machine is economical type which with whole steel structure

1. The max speed is up to 35 meters/min, engraving speed is 25 meters/min

2. Adopting easy cooperated DSP control system, it is convenient to operate.

3. Unique intelligent budget principle make the motors offerring the high speed, so it could make the straight and smooth curves.

4. Double motors to drive Y axis

5. High strength steel tube jointing.

6. The table equipped with 6 divided vacuum zones.

7. Optional: auto tool CHANGER
Italy air cooling spindle
Germany oil-free vacuum pump

Technical Parameter:
NO. Description
Parameter
1
Table size
1480×3000mm
2
X,Y working area
1300×2500mm
3
Z working area
200mm
4
Max. speed
35m/min
5
Working Speed
25m/min
6
Resolution/ work delicacy
0.02mm
7
Repositioning Accuracy
0.05mm
8
Interface
USB
9
Command
G code*.u00*.mmg* plt
10
Surroundings for software
windows98/2000/xp
11
Control system
DSP control system
12
Power(spindle power is not included)
8.87KW
13
Working voltage
AC380V 50Hz
14
Spindle power (domestic made)
4.5KW water cooling spindle
15
Spindle rotating speed
0-24000rpm/min
16
Motor
Stepper


HKJ series Ring die Animals feed pellet mill

feed pellet mill
1.CE certificate
2.pellets size: 6mm-8mm
3.pellets length: 20mm-50mm
4.warranty period: 3years
ring die feed pellet mill
It's new generation of energy-saving products,researched and developed by our researcher newly. It is mainly used to compress crushed
corn straw,plant waste,bamboo powder,grass,straw,rice husk and wood chips
etc. into cylindrical and square shape particles.Machines adopt bipolar speed adjusting,and have the characteristics of low power consumption,reasonable structure,economic and durable.
The main electrical control system adopts the international standard-delta starter,running extremely stable.
technical parameter
Module No.
Output(kg)
Diameter
(mm)
Power
(kw)
Size
(mm)
Weight(kg)
Remarks
HKJ250
500-1000
6-8
22+1.5+0.55/22
1650*1500*1550
1000
V-belt
HKJ260
600-1500
6-8
22+1.5+0.55/22
1650*1500*1550
1200
V-belt
HKJ300
800-2000
6-8
30+1.5+0.55/30
1750*1500*1600
1500
V-belt
HKJ350
1000-3000
6-10
30+2.2+0.75/60
2300*1500*2200
2000
V-belt
HKJ350
1000-3000
6-10
55+2.2+0.75/55
2300*1200*2200
2000
gearbox
HKJ420
1500-5000
6-12
90+2.2+1.1/90
2500*1200*2300
3000
gearbox
HKJ508
2000-8000
6-15
110+2.2+1.1/132
2500*1300*2400
3800
gearbox

HKJ250 ring die animal feed pellet mill

animal feed pellet mill
1.mainly making feed pellets
2.as organic fertilizer
3.CE certificate
ring-die pellet mill information:
HKJ granulator series machine is can applied to the manufacture of granule in mushroom cultivation ,poultry farm , organic fertilizer plant, ect. It can grinding
rice straw,corn stalk,clover
alone or mix them together. Before make pellets please check the moisture is
18%-20%
. The moisture is depend on raw material. We have some ring-die of different diameter for your choise.
Technical parameter:
Type no
Outputwood/feed
Powerwood/feed
Outer DIMmm
Weight (kg)
HKJ250
500kg/1000kg
22+1.5+0.55kw/22kw
1650*1500*1550
1000
HKJ260
600kg/1500kg
22+1.5+0.55kw/22kw
1650*1500*1550
1200
HKJ300
800kg/2000kg
30+1.5+0.55kw/30kw
1750*1500*1600
1500
HKJ350
1000kg/3000kg
30+30+2.2+0.75kw/60kw
2300*1500*2200
2000
HKJ350
1000kg/3000kg
55+2.2+0.75kw/55kw
2300*1200*2200
2000
HKJ420
1500kg/5000kg
90+2.2+1.1kw/90kw
2500*1200*2300
3000
HKJ508
2000kg/8000kg
110+2.2+1.1kw/132kw
2500*1300*2400
3800
straw pellets:

bamboo powder pellets:

crop stalk pellts:

HL-1 Wood dryer/0086-15890634356

HL-1 wood dryer
Power: 4 KW
Output: 400KG/H...
HL-1 wood dryer

It is suitable for drying materials of moisture 20-35%, like sawdust, rice hull, milled wheat straw, corn stalks and so on. It takes the advantages of low cost consumption and high efficiency, reducing the moisture to 8-12%. Wet material is input into the hopper. The stove (boiler) generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air are flowing and going through the curving pipes and buffer(drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock.

Technical data:
Power: 4 KW
Output: 400KG/H
Diameter of raw materials: <3mm & < 5mm
Temperature of Hot Air: 180°C~250°C
Consumption of Wood Waste: 30-35KG/H
Dimension: Square stove 1.5x1.06x1.1 800kg/740kg
Pipe 2.44x1.22x1.55 300kg/260kg
Net/Gross Weight: 1000/1100kg

contact:linda
mobile:0086-15890634356
trade manager:cn220066143
If you are interested in our
wood dryer
, please feel free to contact LINDA for further information.
Looking forward to cooperating with you.

HM 1642 Variable speed wood lathe

HM 1642 Variable speed wood lathe
Features:
Electronic variable speed control
Digital spindle speed indicator
HM 1642 Variable speed wood lathe
Features:
Electronic variable speed control
Digital spindle speed indicator
30"direct indexing using 1 indexing hole
10" indexing using all 3 indexing holes
Headstock can be positoned anywhere along the bed
0 deg, 45 deg, 90 deg, 135 deg, 180 deg,270 deg,
and 360 deg head stock rotation.
Tailstock, headstock and tool rest support have lever
action cam locks for quick positioning
Belt drive offers 2 speed ranges
Spindle lock pin
Outboard spindle handle
Forwaid/reversing switch
Emergency stop switch
Specifications
Swing over bed:
408mm(16 in)
Distance between centers:
1060 mm(42 in)
Headstock:
Spindle thread: M33x 3.5 RH
Headstock bore: No.2 Morse Taper(MT2)
Tailstock: Tailstock bore:

No.2 Morse Taper(MT2)
Quill travel:
102 mm(4 in)
Hole Trough Tailstock
15 mm(9/16 in)
Toolrest: Length:
355 mm(14 in) Toolrest
Poly Vee Drive Belt
Faceplate
Spur Center and live center
Weight:
385.5/440.51bs(175/200 kgs)
Packing size(mm)
60-5/8"x18-1/8"x22-7/16"
units/20' container
68 pcs

HOMAG FZ55C Automatic Edge Bander Machinery

HOMAG Edge Bander Machinery
ROUGH Trimming , Fine Trimming,
Scraping, Grooving Units
In Germany HOMAG Structure
With CE
Schnell-Germany HOAMG Edge Bander Machinery

Thickness of Panel
10-50 mm
Min.wideth of panel
45 mm
Min.length of panel
120mm
Width of edge
15-60mm
Panel feed speed
11.6m/Min
Voltage
380V, 415V 220V; 50-60HZ ;3 phases
Heater
1.7 KW
Glue Box Capacity
5 Liters
Melting pot of glue
140-200· degree
Heating Time
15-30 Minutes
Tatal Power
12.72Kw
Air pressure
0.6MPa
Outline size
5000*950*1450 mm
Net Weight
1580KG
Suitable Edge Banding
PVC, Melamine,ABS,Veneer,
Solid Wood Strip.
Workpiece
Plywood, Fibreboard, MDFboard,
Particle board,

Features
End Cutting, Rough Trimming,
Fine Trimming, Scraping, Grooving units are
fully adopted Germany HOMAG
KDF 1402C’s advanced structure.
Most stable, and high precision,
most easy adjustment; Saftey full colsed Lid.
Machine Colour

Standard *Red
Other colour* white, blue, yellow is customized
MAIN DEPLOY
Electric Components Japan OMRON brand & Germany SCHNEIDER& TAIWAN SDM

Penumatic Components TAIWAN AIRTAC & SNS
(Italy Electric Motor is optional)
Quality Prove
Got ISO9000; CE Certificate
Means
FOB , CFR , CIF
Port of Loading
Qingdao Seaport, China
MOQ
1 PC
Payment
T/T
Delivery
In 10 to 15 days after received your prepayment
Package
Plywood Case



HOMAG FZ55C Edge Banding Machine

Schnell- HOMAG Edge Banding Machine
ROUGH Trimming , Fine Trimming,
Scraping, Notching Units
In Germany HOMAG Structure
Schnell- Germany HOAMG Edge Banding Machine

Modle: FZ55C

DATA
Edge Thickness: 0.3-15mm
Edge Width: 15-50mm
Workpiece Thickness: 10-45mm
Workpiece Min.Width: 60mm
Workpiece Min.Length: 120mm
Workpiece Feeding Speed: 11.6m/Min(6-16m/Min)
Total Power: 11.5KW
Air pressure: 0.6Mpa
Outline Size:5000*950*1450mm
Net Weight: 1580KG

Edge Banding Material:
PVC, Melamine,ABS,Veneer,Solid Wood Strip.
Workpiece:
Plywood, Fibreboard, MDFboard,
Particle board, Full-close saftey Lid. More saftey operation.
3.Imported electric and transmitting components

Features:
Its End Cutting,ROUGH
TRIMMING, Fine Trimming, SCRAPING, Notching Units.
HIGH STABILITY, MORE ACCURATE, Are fully adopted Germany HOMAG Structure.
EASY OPERATION, High Accuracy, LONG LIFE SPAN.


























Machine Body & Beam: Thickening & Heavy cast aluminum












Premilling






Edging




End Cutting



Rough Trimming & Fine Trimming





Scrapping & Buffing


Vertical /Horizontal Grooving






Glue Scraping is optional

3D WOODWORKING MACHINE FC-1325MT-3

3D WOODWORKING MACHINE FC-1325MT
1Italy HSD4.5KW air cooling spindle*3
2Vacuum table
3.heavy loading capacity
4.linear rail
3D WOODWORKING MACHINE FC-12325MT-3
Performance parameters

outer dimension
2300*3000*1600mm
X,Y axis travel
1300*2500mm
Z axis travel
>300mm
Table size
1340*3000mm
Max running speed
60m/min
Max Engraving speed
30m/min
Max feeding height
300mm
Resolution
±0.001mm
Engraving indicate
Gcode.u00.mmg.plt
Software operating environment
Windows98/2000/XP
Working power(no including spindle)
4.5kw
Work Voltage
AC380V/50Hz
Power of spindle
6.0kw
Spindle rotating speed
6000-18000rpm/min
Work mode
AC servo



Gantry-type character
1.Gantry-moving and whole structure is seamless welding steel-structure and it is firm and will not become deformed.
2.The whole machine uses high quality seamless welded steelstructure,the assembly contact surface iare used scraping process, the whole structure high-temperature aging treatment, rigid and not deformed.
3.This machine adopts the Italian high-speed air-cooled spindle motor, spindle cooling fully guaranteed, can work long time.
4.Use imported Japanese Yaskawa servo drive system, torque, high precision, fast and stable performance.
5.Use Taiwan Syntec controlling system,good compatibility,compatible type3/Artcam/Castmate / Artcut / CAD / CAM and other design software. Can control the completion of multi-dimensional 3D processing, and can do fast, smooth three-dimensional processing, carving and cutting.
6.Table is vacuum adsorption countertops which is an international leader technic , made of high strength rigid plastic, high-absorption edge and strong adsorption of different sizes of materials, density, non-deformation.
7.Auto-oiling lubrication system, easy to operate, greatly improve the life of the various components of the machine.
8.Standard three-spindle and automatic rotation. Able to carry out positive and lateral drilling, carving, Engraving, milling surface and so on. To meet the needs of large and medium processing enterprises.


HOMAG FZ55C Edge Bonding Machinery

Schnell- HOMAG Edge Bonding Machinery
ROUGH Trimming , Fine Trimming,
Scraping, Notching Units
adoped HOMAG Structure
Schnell- Germany HOAMG Edge Banding Machinery
Modle: FZ55C

DATA
Edge Thickness: 0.3-15mm
Edge Width: 15-65mm
Workpiece Thickness: 10-60mm
Workpiece Min.Width: 60mm
Workpiece Min.Length: 120mm
Workpiece Feeding Speed: 6-16m/Min
Total Power: 7.8KW
Air pressure: 0.6Mpa
Outline Size:5000*950*1450mm
Net Weight: 1580KG

Edge Banding Material:
PVC, Melamine,ABS,Veneer,Solid Wood Strip.
Workpiece:
Plywood, Fibreboard, MDFboard,
Particle board, Full-close saftey Lid. More saftey operation.
3.Imported electric and transmitting components

Features:
Its End Cutting ,ROUGH & FINE TRIMMING, SCRAPING, Notching Units
Are fully adopted Germany HOMAG Structure.
EASY OPERATION, High Accuracy, LONG LIFE SPAN.








































Machine Body & Beam: Thickening & Heavy cast aluminum







Premilling






Edging




End Cutting



Rough Trimming & Fine Trimming





Scrapping & Buffing





Vertical /Horizontal Grooving is optional








HOMAG FZ55C Woodworking Edge Bander Machine

Automaitc woodworking Edge Bander Machine
ROUGH Trimming , Fine Trimming,
Scraping, Notching Units adoped HOMAG Structure
CE
Schnell- Germany HOAMG Woodworking Automatic Edge Bander Machine
Item: Automatic Edge Bander
Modle: FZ55C

Thickness of Panel
10-50 mm
Min.wideth of panel
45 mm
Min.length of panel
120mm
Width of edge
15-60mm
Panel feed speed
11.6m/Min
Voltage
380V, 415V 220V; 50-60HZ ;3 phases
Heater
1.7 KW
Glue Box Capacity
5 Liters
Melting pot of glue
140-200· degree
Heating Time
15-30 Minutes
Tatal Power
12.72Kw
Air pressure
0.6MPa
Outline size
5000*950*1450 mm
Net Weight
1580KG
Suitable Edge Banding
PVC, Melamine,ABS,Veneer,
Solid Wood Strip.
Workpiece
Plywood, Fibreboard, MDFboard,
Particle board,

Features
End Cutting, Rough Trimming,
Fine Trimming, Scraping, Grooving units are
fully adopted Germany HOMAG
KDF 1402C’s advanced structure.
Most stable, and high precision,
most easy adjustment; Saftey full colsed Lid.
Machine Colour

Standard *Red
Other colour* white, blue, yellow is customized
MAIN DEPLOY
Electric Components Japan OMRON brand & Germany SCHNEIDER& TAIWAN SDM

Penumatic Components AIRTAC & SNS


(Italy Electric Motor is optional)
Quality Prove
Got ISO9000; CE Certificate
Means
FOB , CFR , CIF
Port of Loading
Qingdao Seaport, China
MOQ
1 PC
Payment
T/T
Delivery
In 10 to 15 days after received your prepayment
Package
Plywood Case

























Machine Body & Beam: Thickening & Heavy cast aluminum












Premilling






Edging




End Cutting



Rough Trimming & Fine Trimming





Scrapping & Buffing



Vertical /Horizontal Grooving is Optional





Glue Scraping is optional





FZ55C + Glue Scraping Unit + Notching Unit



HOMAG-FZ40C Straight Edge Banding Machinery

Automatic edge banding machinery is suitable for 0.3-15 thickness edge banding.
With CE

Schnell-HOMAG FZ4C (Automatic Straight Edge Banding Machinery)



Edge feeding & Edging & Edge Cutting Unit






End Trimming Unit







Fine Trimming







Buffing Unit








Details:
Thickness of Panel
10-50 mm
Min.width of panel
45 mm
Min.length of panel
120mm
Width of edge
15-60mm
Panel feed speed
11.6m/Min
Voltage
380V, 415V 220V; 50-60HZ ;3 phases
Heater
1.7 KW
Glue Box Capacity
5 Liters
Melting pot of glue
140-200· degree
Heating Time
15-30 Minutes
Tatal Power
5.25Kw
Air pressure
0.6MPa
Outline size
3300*750*1400mm
Net Weight
1000KG
Suitable Edge Banding
PVC, Melamine,ABS,Veneer,
Solid Wood Strip.
Workpiece
Plywood, Fibreboard, MDFboard,
Particle board,

Features
End Cutting, Fine Trimming units are
fully adopted Germany HOMAG
KDF 1402C’s advanced structure.
Most stable, and high precision,
most easy adjustment; Saftey full colsed Lid.
Machine Colour

Standard *Red
Other colour* white, blue, yellow is customized
MAIN DEPLOY
Electric Components Japan OMRON brand & Germany SCHNEIDER& TAIWAN SDM

AIRTAC Air-operated.


Italy Electric Motor is optional
Quality Prove
Got ISO9000; CE Certificate
Means
FOB , CFR , CIF
Port of Loading
Qingdao Seaport, China
MOQ
1 PC
Payment
T/T
Delivery
In 10 to 15 days after received your prepayment
Package
Plywood Case

HOME-CNC3020T Engraving Machine Triaxial Numerical Control

HOME-CNC 3020T
numerical control engraving machine
carton package by DHL,UPS,EMS shipping
hot selling!
HOME-CNC3020T

HOT CNC ROUTER WITH DUST COLLECTOR

CNC ROUTER WITH DUST COLLECTOR
1. 2 SPINDLES WITH 1.5KW POWER
2. TAIWAN ROUND RAILS
3. NC STUDIO CONTROL SYSTEM
4. STEPPER

FC-1212MD
Features of the machine:
The three axises of this machine are all imported with original precise grinding screw rod,and eliminate cracks automatically.The water-cooled spindle motor of 1.5kw frequency conversion power,the step -by step drive motor,the fine segmentation driver,all of above enture the machine works in high speed and accuracy. No missing space even in the 6m/min running speed , this is very few in the all professional processing equipments.Meanwhile the standard layout of double head carving principal spindle, the high synchronization capability ensure the high production efficiency of batch orders

Outer dimension
1660×1650×1500mm
XY axis travel
550×1200mm/single head
Z axis travel
100mm
Table size
1340×1420mm
Max running speed
1m-8m/min
Max engraving speed
1m-6m/min
Max Feed-in height
110mm
Resolution ratio
0.015mm
Command Language
CODE G.u00.mmg.plt
Software operating environment
Windows98/2000/xp
Working power(not include spindle)
400W
Working Voltage
220V/50Hz
Spindle power
1.5/2.2kw
Spindle rotating speed
0-24000rpm/min
Work mode
steppingscrew rod transmission

HOT CNC Router with Automatic Change Tool

CNC Router with Automatic Change Tool FC-1325MT
1.Vacuum table
2.Heavy duty
3.Taiwan square linear rail
4.Ncstudio
CNC Router with Automatic Change Tool FC-1325MT
Gantry-type character
Gantry-moving and whole structure is seamless welding steel-structure and it is firm and will not become deformed.
This machine adopt high speed imported spindle,Japan servo motor,high accurate and speed.
Advanced Document Preprocessing function help the users correct the fault of processing document.
Advanced three-dimensional curve prediction procedure, polyline stable,which ensure curve operating speed and accurate.
Variety matches:can install horizontal milling,straigjt drill, horizontal drilli,excavate saw,hob,two axis,three axis, Automatic Tools Changing,ect.
Variety functions:can process drilling, Hole drilling,engraving, through-carved, Facemilling and so on.Satisfied the request of large and medium-size processing enterprises.

Performance Parameter

Outer dimension
2100*3800*1600mm
X,Y axis travel
1300*2500mm
Z axis travel
>220mm
Max running speed
60m/min
Max engraving speed
30m/min
Max feed-in height
220mm
Resolution ratio
±0.001mm
Command code
G.uoo.mmg.plt
Sofeware operating environment
Windows98/2000/xp
Power (not include spindle0
4.5KW
Work voltage
AC380V/50Hz
Spindle rotating speed
6000-18000rpm/min
Configuration
Italy HSD 4.5kw air-cooling spindle(two spindles);
Stepper
Nc Studio Control System
Taiwan linear rails
5.5KW vacuum
Options
1.Taiwan Syntec Control System
2. Dust Collector
Packed Weight
1300KGS

FC-1325MTK

HOT PRESS FOR WOODWORKING MACHINE

1.GERMAN TECHNOLOGY
2.ISO2000 QSA
3.HOT PRESS LAYER:14
4.BOARD DIMENSION:2700*1370*40MM
HOT PRESS FOR WOODWORKING MACHINE

1.GERMAN TECHNOLOGY
2.ISO2000 QSA
3.HOT PRESS LAYER:14
4.BOARD DIMENSION:2700*1370*40MM


SEQ.XFER
ITEM
UNIT
SPECIFIACTIONS
01
Compression ability
(Tons)
500
02
Maximum pressure
(Kg/cm^2)
14
03
Hot plate dimension
(L*Wmm)
2700*1370*40t
04
Hot plate distance
(Mm)
70
05
Hot plate amount
(Sheet)
13
06
Number of daylights

12
07
Rate of rise
(Mm/min)
112
08
Rate of decent
(Mm/min)
126
09
Compression speed
(Mm/min)
170
10
Pressure range

300-500
-1
Hydraudic pump motor
(Kw· p)
18.6*4
-2
Hydraudic pump motor
(Kw· p)
11.2*6
11
Overall dimension

4500*3580*1370
12
Net weight
(Tons)
36

HOT PRESS

WORK SIZE: 4x8 FEET
PLATEN SIZE: 2700X1370X42MM/52MM
OPENING: 10/15 LAYER
WORK SIZE: 4x8 FEET
PLATEN SIZE: 2700X1370X42MM/52MM
OPENING: 10/15 LAYER
MAX OPENING: 100/70MM
MAX PRESSURE: 600/500TON
CYLINDER: Dia.360/320mmx2PCS
RATED POWER: 11+7.5KW
CUSTOMIZED DESIGN IS AVAILABLE
ASSEMBLED FRAM

Thursday, September 15, 2011

HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Wood cnc router prices
DSP Control handle
Machine head protect hood, dust hood and brackets
Imported square guide rail
CE
HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Features
1.Wood cnc router prices
2.DSP Control handle
3.Machine head protect
hood, dust hood and brackets
4.Double fix ways: Vacuum adsorption and T-slot aluminum table provide double fix ways
5.Imported square guide rail ensure higher precision
6.Y-axis adopts advanced dual-axis gear transmission and dual-motor driver system
7.High processing-speed, fast cutting speed, high efficiency,
8.High-speed water cooling
9.Large compatibility. Type3/ArtCAM/Castmate/Ucancam and so on.
10.Convenient control.
11.Auto oiling system
12.Special working head hood to supply the spindle a clearer environment
Description
This machine is mainly used in furniture making industry
Specifications:
Model
Spec
TSW1325
X,Y Worksize
1300x2500mm
Z-axis worksize
200mm
Control system
DSP
Spindle power
4.5kw
Cooling way
Water Cooling
Spindle rotating speed
0-24000rpm
Transmit way
X,Y Rack and pinion, Z Ballscrew
voltage
380v/50hz
Machine power
1500w
Command
G code
Max Speed
35m/min
Working speed
20m/min
Motor
Stepper
Bracket
Large Tube
Vacuum pump
with
Compatible Software
Type3,Artcam,Ucancam
Holding way
Vacuum table
Cutter diameter
3.175-12.7mm
Machine Length
3200mm
Machine width
1600mm
Machine Height
1600mm
Package
Wooden box

Machine details

Samples

Package


3D Woodworking CNC Router

3D Woodworking CNC Router QL-1530
High speed and high acuracy
Large power spindle
Imported guide rail
CE
3D Woodworking CNC Router/Woodworking CNC Engraving Machine QL-1530

Characteristics:
1, Germany with double-nut ball screws automatic elimination gap.
2, linear square Guide. Is the linear guide bearing surface contact, high-precision linear guide of CNC equipment manufacturers use some of the ordinary life of the 2200-Advisory times, long-term use of high accuracy.
3, driver in a high-speed drives, faster than the original model, up nearly two meters.
4, Duandao continued carving a breakpoint features, supporting up to nine points, can be carried out anywhere arbitrary carving.
5, strong compatibility: compatible Type3/artcarm/castmate/proe/Corelerow / Wentai, and other CAD / CAM software, which produced exquisite relief sculpture, video carved, three-dimensional works of art.
6, water-cooled high-power frequency spindle can be 20-30 mm stroke cutting the plexiglass, applies to advertising, mold, gifts, woodworking building model processing and production.

Performance parameters:

Machine Model
QL-1530
X.Y working area
1600*3100mm
Z working area
>200mm
Table
1700*3600mm
The largest operating speed
8m-30m/min
Clamping type
Vacuum adsorption
Processor
DSP/ Speeds 100MHz
Interface
USBHandle
Command
G code *.u00*.mmg*.plt
Surroundings for software
windows98/2000/xp/DSP
Power(not include the spindle)
1500-2000W
Work voltage
380V/50Hz
Spindle power
4.5KW
Spindle rotating speed
18000-24000rpm/min
Work Mode
Stepper or servo



HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Wood cnc router prices
DSP Control handle
Machine head protect hood, dust hood and brackets
Imported square guide rail
CE
HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Features
1.Wood cnc router prices
2.DSP Control handle
3.Machine head protect
hood, dust hood and brackets
4.Double fix ways: Vacuum adsorption and T-slot aluminum table provide double fix ways
5.Imported square guide rail ensure higher precision
6.Y-axis adopts advanced dual-axis gear transmission and dual-motor driver system
7.High processing-speed, fast cutting speed, high efficiency,
8.High-speed water cooling
9.Large compatibility. Type3/ArtCAM/Castmate/Ucancam and so on.
10.Convenient control.
11.Auto oiling system
12.Special working head hood to supply the spindle a clearer environment
Description
This machine is mainly used in furniture making industry
Specifications:
Model
Spec
TSW1325
X,Y Worksize
1300x2500mm
Z-axis worksize
200mm
Control system
DSP
Spindle power
4.5kw
Cooling way
Water Cooling
Spindle rotating speed
0-24000rpm
Transmit way
X,Y Rack and pinion, Z Ballscrew
voltage
380v/50hz
Machine power
1500w
Command
G code
Max Speed
35m/min
Working speed
20m/min
Motor
Stepper
Bracket
Large Tube
Vacuum pump
with
Compatible Software
Type3,Artcam,Ucancam
Holding way
Vacuum table
Cutter diameter
3.175-12.7mm
Machine Length
3200mm
Machine width
1600mm
Machine Height
1600mm
Package
Wooden box

Machine details



Ballscrew Clamp Main spindle
Motor Rotary clamp
tool sensor Vacuum pump
Water pump
vacuum table
Samples

Package


HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Wood cnc router prices
DSP Control handle
Machine head protect hood, dust hood and brackets
Imported square guide rail
CE
HOT SALE ! Transon TSW1325 Wood CNC Router Prices

Features
1.Wood cnc router prices
2.DSP Control handle
3.Machine head protect
hood, dust hood and brackets
4.Double fix ways: Vacuum adsorption and T-slot aluminum table provide double fix ways
5.Imported square guide rail ensure higher precision
6.Y-axis adopts advanced dual-axis gear transmission and dual-motor driver system
7.High processing-speed, fast cutting speed, high efficiency,
8.High-speed water cooling
9.Large compatibility. Type3/ArtCAM/Castmate/Ucancam and so on.
10.Convenient control.
11.Auto oiling system
12.Special working head hood to supply the spindle a clearer environment
Description
This machine is mainly used in furniture making industry
Specifications:
Model
Spec
TSW1325
X,Y Worksize
1300x2500mm
Z-axis worksize
200mm
Control system
DSP
Spindle power
4.5kw
Cooling way
Water Cooling
Spindle rotating speed
0-24000rpm
Transmit way
X,Y Rack and pinion, Z Ballscrew
voltage
380v/50hz
Machine power
1500w
Command
G code
Max Speed
35m/min
Working speed
20m/min
Motor
Stepper
Bracket
Large Tube
Vacuum pump
with
Compatible Software
Type3,Artcam,Ucancam
Holding way
Vacuum table
Cutter diameter
3.175-12.7mm
Machine Length
3200mm
Machine width
1600mm
Machine Height
1600mm
Package
Wooden box

Machine details

Samples

Package


HOT cylider engraving machine

FC-2020Y
1.working area:200*2000mm
2.2.2kw water cooling spindle
3.Ncstudio control system
4.cylidrical

Features
Using memorical mode to breakpoint to ensure the continuing opration after accident or next day working.

The unique processing method can preserve a number of workpiece.

The moving gantry is firm and durable that makes the positioning accuracy more precise.

The spindle motor is 2.2kw that can engrave the column that its diameter is 20cm and the length is 110cm.

This machine is used by furniture-producers, schools,other Enterprises and government institutions to make architecture-models.

FC-2020Y Technology Parameter

1
Dimension
700*2500*1200mm
2
Working area
600*2200mm
3
Working travel
150*2000mm
4
Resolution
0.025mm
5
Spindle power
1.5 /2.2KW(Optional)
6
Voltage
AC220V/50Hz
7
Running speed
5m/min
8
Running speed of spindle
24000rpm/min
9
Cutters
3.175 4 6
10
Engraving indicate
HPGL.G(Code)

HOT!!!desktop 3D Laser Scanner-3DS12(1200*1200*80)

HOT!!desktop 3D Laser Scanner-3DS12(1200*1200*80)
1,resolution ratio:0.001mm
2,scanner:British high-precision induction system
HOT!!!desktop 3D Laser Scanner-3DS12(1200*1200*80)
Applicable Industries:
Simulated mahogany furniture, European-style furniture, architectural decoration, Stone carving, Protection of cultural relics and many other high precision simulation industry
Features:
3D laser scanner is a new high-tech item. It takes only a few minutes to scan the most intricate real object relief into a computer. 3D laser scanner provides more convenient digital solutions for modern artistic carving. It forms a complete modern cnc processing procedure when configuring with ULI professional relief software.
3D laser scanner head imported from the United Kingdom
scanning speed 6m/min
3 axes all adopt high precision PMI ball screw, ensuring precise positioning and high quality
Integrally cast Lathe body and heat-treatment ensure machine body durable


Technical parameters:
Technical Parameters
3DS12
Working Area
X Axis
1200mm
Y Axis
1200mm
Z Axis
80mm
Scanner
Scanner
British high-precision induction system
Resolution ratio
0.001mm
Mechanical
Structure
Work Table
Cast iron table
Transmission
X, Y, Z axis all adopt high precision ball screw
Accuracy
Processing Accuracy
0.01mm
Repeat Positioning Accuracy
0.01mm
Speed
Max Moving Speed
Stepper: 8m/min, Servo: 12m/min
Max Working Speed
Stepper: 8m/min, Servo: 12m/min
Software Support
ARTCAM,TYPE3,ENG,etc.
Drive System
Stepper
Control System
High resolution ratio cnc system
Power Supply
AC220V/50Hz
Net Weight
700kg
(Note: No further notification is performed when the parameters and models are changed.)