Saturday, September 17, 2011

HF drying machine

1.High frequency vacuum dryer
2.3, 4, 6, 10 cubic meter
3.HF fast heating
4.Vacuum minus pressure
5.JYE-18 years experience
High frequency vacuum dryer (timber dryer)

1. It is new drying mechod.(Dielectric heating)

Steam and normal vacuum dryer(hot plate) is conductive heating.
They dry the wood little by little from outside to inside.
High frequency is dielectric heating.
HF wave can penetrate the thick wood
and dry it uniformly. Even the core of wood temperature is heater than surface.

Vacuum condition: It is minus pressure, safe.
the wood moisture can voparized in low temperature.
Then vopar will be pump out automatically.
So
HF cacuum dryer is more than 10 times
faster
,
more uniform, no bending
and
no crack
caused by non-uniform.


2. No need boiler; No need hot plate (no hot water)
The power supply of HF vacuum dryer is electrcity.
It does not need boiler, save the human resourse and protect the enviroment.

3. Worm killing.
Capacity
3CBM
4CBM
6CBM
10CBM
Model
GJG-1.7-3-JY
GJG-1.7-4-JY
GJG-1.7-6-JY
GJG-1.7-10-JY
Power
AC 380V 50HZ 3phase 4wire
Output Power
30KW
40KW
50KW
80KW
Wood loading size
H1000xW1000xL3000mm (3CBM capacity)
H1000xW1000xL4000mm (4CBM capacity)
H1000xW1000xL6000mm (6CBM capacity)
H1300xW1300xL6000mm (10CBM capacity)
Oscillation frequency
6.78MHz
Max pressure
-0.09MPa
We also supply other machine:
1.
HIGH FREQUENCY CURVED PLYWOOD PRESS: P
lywood, MDF, HDF bending: office chair, sofa, bed elements, musical instrument and others
2.
HIGH FREQUENCY FRAME ASSEMBLY MACHINE (FOR 90 DEGREE ANGLE SOLID FRAME ASSEMBLING)
3.
HIGH FREQUENCY CABINET DOOR ASSEMBLER (FOR 45 DEGREE ANGLE PHOTO FRAME, CABINET DOOR FRAME ASSEMBLING
Solid wood frame assembling: door, window, photo frame, cabinet-door and other frame assembling
4
HIGH FREQUENCY VACUUM DRYER (FOR WOOD DRYING)
HF heating in vacuum condition. More uniform and 10 times faster than steam. No crack, bending, color-changing problem. Worm killing. No population (no boiler)
5
HIGH FREQUENCY EDGE GLUER (FOR FINGER JOINT BOARD JOINING)

No comments:

Post a Comment