HCM-120T woodworking machine/finger-joint board/light side press machine

press machine
1.professional manufactuer
2.high efficiency and stability
4.appliable to finger-joint board
5.ISO9001:2008
HCM-120T light side press machine

press machine

The
press machine
consists of principal machine ,side press machine ,cylinder assembly,hydraulic station ,steam piping entering and exiting system and electrical cabenit and so on .
Principal machine: is a framed tructure,made up of upper tray ,medium tray ,lower tray ,has high strength and good rigidity .Hot plate is between the upper and medium tray ,the serpentine inside the hot plate drilling heats the hot plate evenly by the steam .the feet and stepped plates on both side of hot plates can support the hot plate and guid the plate .
Lateral pressure device:It is fixed on both side of framework,tightening the framework.
Lateral compressor :It control advancing and retreating function.
Master cylinder :assembly fixed on the lower tray connected by circular flanges and bolts,to ensure tightness of the cylinder.
1.This machine is widely used and can make several kinds of man-made boards,such as veneer sheets,chipboards ,plywood and insulating boards ,with different pressure.
2.with advantages of small pressure loss,large flow,low failure rate,and convenient maintenance,the domestic advanced cartridge value structure has been employed in hydraulic system .
3.The machine works in boths manual and automatic manners .
4.it is good in frame ,safe in operation,etc

MAJOR TECHNICAL PARAMETERS
ITEM NO
DESCRIPTION
UNIT
SPECIFICATION
1
MAIN CYLINDER PRESSURE
KN
1200
2
SIDE CYLINDER PRESSURE
KN
120
3
WORKBENCH WIDE
(MM)
1300*600
4
LAYER

6
5
OPENING
(MM)
80
6
MAIN CYLINDER PISTON DIAMETER
(MM)
220
7
MAIN CYLINDER NO
PIECE
1
8
SIDE CYLINDER TYPE/QUANTITY

30-100MM*12
9
CLOSING TIME OF MAIN CYLINDER
S
NO MORE THAN 30S
10
SIDE PRESSURE TIME

NO MORE THAN 3S/LAYER
11
HEATING MEDIUM

SATURATED STEAM
12
LOW PRESSURE PUMP FLOW

53L/MIN
13
HIGH PRESSURE PUMP FLOW

12L/MIN
14
SIDE PRESSURE PUMP FLOW

12L/MIN
15
MAIN CYLINDER OIL PRESSURE
MPa
31.5
16
SIDE CYLINDER OIL PRESSURE
MPa
14
17
TOTAL MOTOR POWER
KW
7.5
18
STRUCTURE

FRAME
19
CLOSED ACTION
S
NO MORE THAN5S