wood drying equipment
1, High quality with professional process
2, Low costs with high drying effect
WOOD DRYING EQUIPMENT:
1, THE CONTROL SYSTEM
Automatic control system: the control system of M800 and DELPHI (M800B) is imported form Italy which can realize that the center computer controls a lot of kilns at the same time.
2:.THE AIRCIRCULATION SYSTEM
We have adopted the 3KW high temperature-resistant motor of grade H, efficient fans of casting aluminum; configuration is designed according to the kiln width scientifically to guarantee the wind velocity between the plates around 1.5-2.0m/s
3THE HEATING SYSTEM
The bimetallic ribbed pipes heaters we are using have a high thermal efficiency, less resistance with the cooling area of high-power to ensure the requirement of fast warming. The imported heating valve we adopted is reliable and safe
4THE SPRAY SYSTEM
The imported spray valve we adopt is reliable and safe.
The steam spray of moisture control system is using the special techniques; it can turn the superheated dry steam to the steam of normal pressure with saturation to humidity no matter how high the pressure of boiler’s steam is. It’s better to humidity the dry hardwood.
The hot water humidity system is using the stainless pipes which can ensure the effect of hot water humidity.
5THE VENT SYSTEM
The rotation vent motor of Siemens designed scientifically and removes the wet air of the kilns effectively.
6THE ALL-ALUMINUM CASE
The columns, trusses and the panels of inner and outer are covering by the aluminum of 1.2mm thick, connecting by stainless gong bolt and aluminum rivet. The whole case without the black metal and durable.
Saturday, March 26, 2011
Bamboo dust pellet mill
Bamboo dust pellet mill
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
work bench for garage, steel workbench
work bench for garage
1,size: 1500 * 600 * 800MM
2,40 MM thick laminated wood desktop
3,net weight 90KG
4.it is customized
work bench for garage AX-3322
material
cold rolled steel
size
1500 * 600 * 800mm
desktop
wood or laminated wood
customize
yes
surface
treat with powder coated
1, size: 1500 * 600 * 800mm
2,40 MM thick laminated wood desktop, size: 1500 * 600 * 40mm
3, the desktop can be exchanged to be 8mm iron
4, drawer panel height of 2*90mm
5, very strong load-bearing structure, is very beautiful.
6, net weight: 90KG
7, we offer good service and favourable price.
other types to choose
1,size: 1500 * 600 * 800MM
2,40 MM thick laminated wood desktop
3,net weight 90KG
4.it is customized
work bench for garage AX-3322
material
cold rolled steel
size
1500 * 600 * 800mm
desktop
wood or laminated wood
customize
yes
surface
treat with powder coated
1, size: 1500 * 600 * 800mm
2,40 MM thick laminated wood desktop, size: 1500 * 600 * 40mm
3, the desktop can be exchanged to be 8mm iron
4, drawer panel height of 2*90mm
5, very strong load-bearing structure, is very beautiful.
6, net weight: 90KG
7, we offer good service and favourable price.
other types to choose
work bench
GS-approval
Can be foldable and the height can be adjustable, with quick release
work bench
Square tube 30x30 mm, MDF can be turned to 15o,30o,45o,60o and 75o, Height range: 800-1050 mm, size of the plate: 700x150x18 mm, capacity: 100 kgs.
work bench
Can be foldable and the height can be adjustable, with quick release
work bench
Square tube 30x30 mm, MDF can be turned to 15o,30o,45o,60o and 75o, Height range: 800-1050 mm, size of the plate: 700x150x18 mm, capacity: 100 kgs.
work bench
work bench
work bench
Certification: CE/ISO/GS
Packing: Colour box
Can be foldable and the height can be adjustable, with quick release
Work bench
Certification
: CE/ISO/GS
Packing
: Colour box
Can be foldable and the height can be adjustable, with quick release
Certification: CE/ISO/GS
Packing: Colour box
Can be foldable and the height can be adjustable, with quick release
Work bench
Certification
: CE/ISO/GS
Packing
: Colour box
Can be foldable and the height can be adjustable, with quick release
work bench
work bench
Different height, different type
Steel work bench
Different height, different type
Supports up to 250lbs.
Swivel pegs for irregular shaped clamping
Folds flat for easy storage
Different height, different type
Steel work bench
Different height, different type
Supports up to 250lbs.
Swivel pegs for irregular shaped clamping
Folds flat for easy storage
work bench
work bench
Certification: CE/ISO/GS
Packing: Color box
Can be foldable and the height can be adjustable, with quick release
Work bench
Certification
: CE/ISO/GS
Packing
: Color box
Can be foldable and the height can be adjustable, with quick release
Certification: CE/ISO/GS
Packing: Color box
Can be foldable and the height can be adjustable, with quick release
Work bench
Certification
: CE/ISO/GS
Packing
: Color box
Can be foldable and the height can be adjustable, with quick release
workbench desk
1.workbench used as school furniture,
2science classroom or other types.workstation with high quality,work table,furniture,tabl
workbench used as school furniture,science classroom or other types.workstation with high quality,work table,furniture,table
2science classroom or other types.workstation with high quality,work table,furniture,tabl
workbench used as school furniture,science classroom or other types.workstation with high quality,work table,furniture,table
workbench
Workbench /work bench/ work table is one of many top quality items in our Workbenches department.
workbench details :Work Surface and shelf material 3/8"particle board.
Features: Durable ball bearing drawer glides, full length drawer, large bottom shelf, pegboard, cantilever shelf,easy assembly, corrosion resistant
STEEL
Black Finish
Size Ins 24" x 48" x 60 "
Unit: each
Unit Weight: 97.0000 lbs
workbench details :Work Surface and shelf material 3/8"particle board.
Features: Durable ball bearing drawer glides, full length drawer, large bottom shelf, pegboard, cantilever shelf,easy assembly, corrosion resistant
STEEL
Black Finish
Size Ins 24" x 48" x 60 "
Unit: each
Unit Weight: 97.0000 lbs
workshop drawer steel work table
steel work table
size:2000 * 600 * 800MM
material:cold rolled steel
color and size is optional
table for motorcycle repair
workshop drawer steel work table (AX-3325)
size: 2000 * 600 * 800MM
40 MM thick laminated wood desktop, size 2000 * 600 * 40MM
the desktop can be exchanged for iron 15MM
drawer panel height of 4 * 90,1 * 180,2 * 90,2 * 180MM
net weight 125KG
Description
-----------------------------------------------------------------------------------------------------------------------
1. Made with cold rolled steel
2. Adopt powder coating finish
3. Table is 40mm laminated wood, which looks nice
4. Drawers adopt three parts ball bearing slide, 90% extension.
5, very strong load-bearing structure, is very beautiful.
we offer favourable price and good service.
changable
can change the table to be 8mm, 10mm stell
the drawers can be changed to be different size or to be cabinet
size:2000 * 600 * 800MM
material:cold rolled steel
color and size is optional
table for motorcycle repair
workshop drawer steel work table (AX-3325)
size: 2000 * 600 * 800MM
40 MM thick laminated wood desktop, size 2000 * 600 * 40MM
the desktop can be exchanged for iron 15MM
drawer panel height of 4 * 90,1 * 180,2 * 90,2 * 180MM
net weight 125KG
Description
-----------------------------------------------------------------------------------------------------------------------
1. Made with cold rolled steel
2. Adopt powder coating finish
3. Table is 40mm laminated wood, which looks nice
4. Drawers adopt three parts ball bearing slide, 90% extension.
5, very strong load-bearing structure, is very beautiful.
we offer favourable price and good service.
changable
can change the table to be 8mm, 10mm stell
the drawers can be changed to be different size or to be cabinet
workshop roller tool cabinet
workshop roller tool cabinet
1.tool cabinet can store tools
2.40 MM thick laminated wood desktop
3.size and color is optional
workshop roller tool cabinet, workbench(AX-3327)
1, size: 1200 * 600 * 600MM
2,40 MM thick laminated wood desktop, size 1200 * 600 * 40MM
3, the desktop can be exchanged for iron 8MM
4, very strong load-bearing structure, is very beautiful.
5, castors by two events with brake and 2 fixed casters, each castor Unit Load 500KG
6, multi-layer plywood or iron.
7, we offer reasonable price and good service.
combination
workbench, tool trolley and cabinet
customize
yes
material
cold rolled steel
application
store things in workshop
.
1.tool cabinet can store tools
2.40 MM thick laminated wood desktop
3.size and color is optional
workshop roller tool cabinet, workbench(AX-3327)
1, size: 1200 * 600 * 600MM
2,40 MM thick laminated wood desktop, size 1200 * 600 * 40MM
3, the desktop can be exchanged for iron 8MM
4, very strong load-bearing structure, is very beautiful.
5, castors by two events with brake and 2 fixed casters, each castor Unit Load 500KG
6, multi-layer plywood or iron.
7, we offer reasonable price and good service.
combination
workbench, tool trolley and cabinet
customize
yes
material
cold rolled steel
application
store things in workshop
.
Band Saw (GW4028X)(H-280X)
Band Saw (GW4028X):
1.Besides normal cutting,the working table of the sawing machine can rotate at an angel of 0-45 degree
Band Saw (GW4028X)
1.Besides normal cutting,the working table of the sawing machine can rotate at an angel of 0-45 degree
Band Saw (GW4028X)
Band Saw(MJ343B)
1.Band Saw MJ343B
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
1.Band Saw MJ343B
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
Motor power
1.5hp
Saw wheel diameter
350mm
Table pivot capacity
0-45°
Processing scope
MAX height
200mm
MAX width
335mm
Length of saw blade
2490mm
Line speed of saw blade
12;10m/s
Table size
400 x 500mm
Dust extraction outlet
100mm
N.W./G./W.
85/92KG
Dimensions
1265x520x440mm
Quantity 20′/40container
95pcs/200pcs
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
1.Band Saw MJ343B
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
Motor power
1.5hp
Saw wheel diameter
350mm
Table pivot capacity
0-45°
Processing scope
MAX height
200mm
MAX width
335mm
Length of saw blade
2490mm
Line speed of saw blade
12;10m/s
Table size
400 x 500mm
Dust extraction outlet
100mm
N.W./G./W.
85/92KG
Dimensions
1265x520x440mm
Quantity 20′/40container
95pcs/200pcs
Band Saw(MJ3450/MJ3460/MJ3470)
1.Band Saw MJ3450/MJ3460/MJ3470
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
1.Band Saw MJ3450/MJ3460/MJ3470
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
MJ3450
20" BAND SAW(MJ3450)
Rated input Power:3500W
Blade size:4100x19~38mm
Saw wheel diameter:510mm
Main table size: 640x500mm
Table pivot cpacity:0-45°
Max height:350mm
Max width:500mm
Blade line speed:22m/s(50Hz)
in one compreg case G.W./N.W.:310/280Kgs packing size:930x725x2140mm 20'/40':18/36sets
MJ3460
24" BAND SAW(MJ3460)
Rated input Power:4000W
Blade size:4590x19~38mm
Saw wheel diameter:610mm
Main table size: 700x610mm
Table pivot cpacity:0-45°
Max height:430mm
Max width:600mm
Blade line speed:26m/s(50Hz)
in one compreg case G.W./N.W.:365/330Kgs packing size:1030x730x2218mm 20'/40':15/33sets
MJ3470
28" BAND SAW(MJ3470)
Rated input Power:4000W
Blade size:5020x19~50mm
Saw wheel diameter:710mm
Main table size: 900x700mm
Table pivot cpacity:0-45°
Max height:430mm
Max width:700mm
Blade line speed:26m/s(50Hz)
in one compreg case G.W./N.W.:442/382Kgs packing size:2250x745x1145mm 20':14sets
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
1.Band Saw MJ3450/MJ3460/MJ3470
2.CE Approve
3.Reinforced Steel Body
4.Powerful Industrial Motor
5.Large Cutting Depth
MJ3450
20" BAND SAW(MJ3450)
Rated input Power:3500W
Blade size:4100x19~38mm
Saw wheel diameter:510mm
Main table size: 640x500mm
Table pivot cpacity:0-45°
Max height:350mm
Max width:500mm
Blade line speed:22m/s(50Hz)
in one compreg case G.W./N.W.:310/280Kgs packing size:930x725x2140mm 20'/40':18/36sets
MJ3460
24" BAND SAW(MJ3460)
Rated input Power:4000W
Blade size:4590x19~38mm
Saw wheel diameter:610mm
Main table size: 700x610mm
Table pivot cpacity:0-45°
Max height:430mm
Max width:600mm
Blade line speed:26m/s(50Hz)
in one compreg case G.W./N.W.:365/330Kgs packing size:1030x730x2218mm 20'/40':15/33sets
MJ3470
28" BAND SAW(MJ3470)
Rated input Power:4000W
Blade size:5020x19~50mm
Saw wheel diameter:710mm
Main table size: 900x700mm
Table pivot cpacity:0-45°
Max height:430mm
Max width:700mm
Blade line speed:26m/s(50Hz)
in one compreg case G.W./N.W.:442/382Kgs packing size:2250x745x1145mm 20':14sets
Band Saw-KD25
Band Saw KD-25 is suitable for curve cutting of non-metal material.
Band Saw KD25 Series Band Saw Machine
Technical Parameter:
Series
KD25
Wheel Diameter and Width
900x60mm
Minimum Cutting Radius
100mm
Saw Width
15-25mm
Saw Length
5950mm
Saw Turning Angle
-60degree to +60degree
Sawblade Speed
450-550RPM 50-60Hz
Cutting Capacity
2500x1250x150mm
Sawblade drive motor
7.5kw
X Spindle
3kw
Y Spindle
1.3kwx2
Z spindle
1.3kwx2
Control System
SYNTEC
Working Capacity
1-10m/min
Max speed
30m/min
Band Saw KD25 Series Band Saw Machine
Technical Parameter:
Series
KD25
Wheel Diameter and Width
900x60mm
Minimum Cutting Radius
100mm
Saw Width
15-25mm
Saw Length
5950mm
Saw Turning Angle
-60degree to +60degree
Sawblade Speed
450-550RPM 50-60Hz
Cutting Capacity
2500x1250x150mm
Sawblade drive motor
7.5kw
X Spindle
3kw
Y Spindle
1.3kwx2
Z spindle
1.3kwx2
Control System
SYNTEC
Working Capacity
1-10m/min
Max speed
30m/min
Band Sawing Machine
Max.Process Standard(mm):Square Material 600x600
Round Material 600
Machine measurement(LxWxH)(mm):3400x1100
GB4260(double housing)
Max.Process Standard(mm): Square Material 600x600
Round Material 600
Process Speed (m/min): 26/41/66
Blade dimension(mm): 6900×41×1.3
Main motor output(kw): 7.5
Oil-pump motor output(kw): 1.5
Machine measurement(L×W×H): 3500×1100×2200
Machine weight(kg): 4200
Round Material 600
Machine measurement(LxWxH)(mm):3400x1100
GB4260(double housing)
Max.Process Standard(mm): Square Material 600x600
Round Material 600
Process Speed (m/min): 26/41/66
Blade dimension(mm): 6900×41×1.3
Main motor output(kw): 7.5
Oil-pump motor output(kw): 1.5
Machine measurement(L×W×H): 3500×1100×2200
Machine weight(kg): 4200
1325 wod cnc engraving router machine with ATC
1325 wod cnc engraving router machine with ATC
for large scale production
atc,5.5kw vacuum pump
powerful spindle,8 tools
CE
1325 wod cnc engraving router machine with ATC
Using industry:
Create Star XK1325ATC-0808 Gantry-type CNC maching center is designed for the customers for a high standard, high demand, high degree of automation. Suitable for large-volume, all-weather processing of non-ferrous, metal plate.
Funiture and Decoration: A large area flat plate engraving, wood, panel furniture carving, wood art murals, wood door, cabinet door sculpture.
Wood Product Industy: Sewing machine table, electrical counter face, sports equipment
Musical Instrument Industry: Three-dimensional surface can be carved musical instruments, shape cutting.
Model Features
1. Structural stability: Industry into the production model, heavy-duty full steel frame structure, welding, tempering efficient vector processing, solid non-deformed.
2. Good Parts: Taiwan LNC system, Italy HSD spindle motor.And the spindle bearings for high-precision ceramic bearings, low noise, long life.
Adopted from, Taiwan Hiwin 30 linear rail,ball screw from Germany, bearing force, under the knife and accurate
To adopt Japanese Yaskawa servo drive system, torque and has a perfect security system.
3. Modular structure design: Select and add a variety of machining spindle configuration, can be sculpture, engraving, milling work.
4. A simple and secure mode of operation, advanced document pre-processing to ensure the speed and accuracy of operation
5. Automatic tool changing system , knife storage capacity 8 (Optional)
6. High adhesion, vacuum suction device, the displacement of up to 230 cubic meters / hour
7. Compatible: Open software interface, compatible with type3/arteam/castmate / Wentai a variety of CAD / CAM design software generate the processing code, to ensure the design of barrier-free
technical parameters
Table Size
1350*3100mm
X.Y.X axis working area:
1300*2500*200mm
Reposition accuracy:
±0.02mm
Max material height:
300mm
Spindle Power
8KW
Spindle Speed:
18000rpm/Min
Max-speed:
60000mm/Min
Max-cutting speed:
35000mm/Min
System Resolution
±0.002mm
Working voltage
AC380V/50HZ-60HZ 3-phase
Command Code
HPGL/G Code
Controls
LNC510i system/TaiWan
Drive motors
Servo
sample products
for large scale production
atc,5.5kw vacuum pump
powerful spindle,8 tools
CE
1325 wod cnc engraving router machine with ATC
Using industry:
Create Star XK1325ATC-0808 Gantry-type CNC maching center is designed for the customers for a high standard, high demand, high degree of automation. Suitable for large-volume, all-weather processing of non-ferrous, metal plate.
Funiture and Decoration: A large area flat plate engraving, wood, panel furniture carving, wood art murals, wood door, cabinet door sculpture.
Wood Product Industy: Sewing machine table, electrical counter face, sports equipment
Musical Instrument Industry: Three-dimensional surface can be carved musical instruments, shape cutting.
Model Features
1. Structural stability: Industry into the production model, heavy-duty full steel frame structure, welding, tempering efficient vector processing, solid non-deformed.
2. Good Parts: Taiwan LNC system, Italy HSD spindle motor.And the spindle bearings for high-precision ceramic bearings, low noise, long life.
Adopted from, Taiwan Hiwin 30 linear rail,ball screw from Germany, bearing force, under the knife and accurate
To adopt Japanese Yaskawa servo drive system, torque and has a perfect security system.
3. Modular structure design: Select and add a variety of machining spindle configuration, can be sculpture, engraving, milling work.
4. A simple and secure mode of operation, advanced document pre-processing to ensure the speed and accuracy of operation
5. Automatic tool changing system , knife storage capacity 8 (Optional)
6. High adhesion, vacuum suction device, the displacement of up to 230 cubic meters / hour
7. Compatible: Open software interface, compatible with type3/arteam/castmate / Wentai a variety of CAD / CAM design software generate the processing code, to ensure the design of barrier-free
technical parameters
Table Size
1350*3100mm
X.Y.X axis working area:
1300*2500*200mm
Reposition accuracy:
±0.02mm
Max material height:
300mm
Spindle Power
8KW
Spindle Speed:
18000rpm/Min
Max-speed:
60000mm/Min
Max-cutting speed:
35000mm/Min
System Resolution
±0.002mm
Working voltage
AC380V/50HZ-60HZ 3-phase
Command Code
HPGL/G Code
Controls
LNC510i system/TaiWan
Drive motors
Servo
sample products
Band Sawing Machine
Band Sawing Machine
BS-280G BS-215G BS-180G BS-170G
Band Sawing Machine
BS170G/ BS-215G
1. Rigid cast-iron design with steel base serving as utility shelf
2. Two speeds for optimum cutting of metal
3. Coolant pump ensures longer service life of saw blade
4. Scale on the vise allows easy adjustments for angle cuts
5. Quick adjusting vise for angular cuts- the saw frame swivels, not the material
BS-180G
1. The bow could be swiveled between 90°C and 45°C,no need move the material
2. With higher and easy moving stand.
Model
BS-280G
BS-215G
BS-180G
BS-170G
Max. Capacity
Circular @ 90
o
220mm(8.6’’)
150mm(6’’)
170mm (6.7")
170mm (6.7")
Rectangular @90
o
250x155mm
(10’’X4.3’’)
200x120mm
(7.8’’x4.7)
170 x 210mm
(6.7"x8.3")
170 x 210mm
(6.7"x8.3")
Circular @ 60
o
100(4’’)
Rectangular @60
o
80x95mm
(3.1’’x3.7’’)
Circular @ 45
o
160mm(6’’)
120mm(4.7’’)
120mm (4.7")
120mm (4.7")
Rectangular @ 45
o
160x110mm
(6.3’’x4.3’’)
130x90mm
(5’’x3.5’’)
110x110mm
(4.3"x4.3")
110x110mm
(4.3"x4.3")
Blade speed @50HZ
40/80MPM
40/80MPM
39,66,82 MP
4P 80MPM,8P 40MPM
Blade size
27x0.9x2450mm
20x0.9x2060mm
19.05x0.8x2362mm
20x0.9x2085mm
Motor
0.75/1.1kw
1/1.5HP
0.6/0.8kw
750W(1HP) 50/60HZ
750W (1HP), 50/60HZ
Drive
Gear
Gear
Gear
Gear
Packing size
136x78x100
67x40x62cm(stand)
116x71x79, 61x39x67cm(stand)
130x57x112 cm
125 x 72 x 100cm
N.W. / G.W.
254/287kg
212/245kg
180/210KG
200/240 kg
BS-280G BS-215G BS-180G BS-170G
Band Sawing Machine
BS170G/ BS-215G
1. Rigid cast-iron design with steel base serving as utility shelf
2. Two speeds for optimum cutting of metal
3. Coolant pump ensures longer service life of saw blade
4. Scale on the vise allows easy adjustments for angle cuts
5. Quick adjusting vise for angular cuts- the saw frame swivels, not the material
BS-180G
1. The bow could be swiveled between 90°C and 45°C,no need move the material
2. With higher and easy moving stand.
Model
BS-280G
BS-215G
BS-180G
BS-170G
Max. Capacity
Circular @ 90
o
220mm(8.6’’)
150mm(6’’)
170mm (6.7")
170mm (6.7")
Rectangular @90
o
250x155mm
(10’’X4.3’’)
200x120mm
(7.8’’x4.7)
170 x 210mm
(6.7"x8.3")
170 x 210mm
(6.7"x8.3")
Circular @ 60
o
100(4’’)
Rectangular @60
o
80x95mm
(3.1’’x3.7’’)
Circular @ 45
o
160mm(6’’)
120mm(4.7’’)
120mm (4.7")
120mm (4.7")
Rectangular @ 45
o
160x110mm
(6.3’’x4.3’’)
130x90mm
(5’’x3.5’’)
110x110mm
(4.3"x4.3")
110x110mm
(4.3"x4.3")
Blade speed @50HZ
40/80MPM
40/80MPM
39,66,82 MP
4P 80MPM,8P 40MPM
Blade size
27x0.9x2450mm
20x0.9x2060mm
19.05x0.8x2362mm
20x0.9x2085mm
Motor
0.75/1.1kw
1/1.5HP
0.6/0.8kw
750W(1HP) 50/60HZ
750W (1HP), 50/60HZ
Drive
Gear
Gear
Gear
Gear
Packing size
136x78x100
67x40x62cm(stand)
116x71x79, 61x39x67cm(stand)
130x57x112 cm
125 x 72 x 100cm
N.W. / G.W.
254/287kg
212/245kg
180/210KG
200/240 kg
Band saw WIN600(24")
Fine band saw,610mm saw wheel diameter,different collor design,good quality nice design
Model
WIN500(20")
WIN600(24")
WIN700(28")
Motor
3500W
4000W
4000W
Saw Wheel Diameter
510mm
610mm
710mm
Blade Size(L×W)
4100×19-38.1mm
4590×19-38.1mm
5020×19-38.1mm
Blade Teeth Per Inch
3TH
3TH
3TH
Blade Line Speed(50Hz)
22m/s
26m/s
26m/s
Table Pivot Capacity
0-45°
0-45°
0-45°
Table Size
640×500mm
700×610mm
1000×700mm
Processing Scope(Max Height)
350mm
430mm
430mm
Processing Scope(Max width))
500mm
600mm
700mm
Dust Extension
100mm
100mm
100mm
G.W./N.W.
310/280kgs
365/330kgs
410/420kgs
Dimensions
930×725×2140mm
1030×730×2218mm
1150×1150×2220mm
Quantity Per 20'/40'Container
18/36sets
15/33sets
14/28sets
Model
WIN500(20")
WIN600(24")
WIN700(28")
Motor
3500W
4000W
4000W
Saw Wheel Diameter
510mm
610mm
710mm
Blade Size(L×W)
4100×19-38.1mm
4590×19-38.1mm
5020×19-38.1mm
Blade Teeth Per Inch
3TH
3TH
3TH
Blade Line Speed(50Hz)
22m/s
26m/s
26m/s
Table Pivot Capacity
0-45°
0-45°
0-45°
Table Size
640×500mm
700×610mm
1000×700mm
Processing Scope(Max Height)
350mm
430mm
430mm
Processing Scope(Max width))
500mm
600mm
700mm
Dust Extension
100mm
100mm
100mm
G.W./N.W.
310/280kgs
365/330kgs
410/420kgs
Dimensions
930×725×2140mm
1030×730×2218mm
1150×1150×2220mm
Quantity Per 20'/40'Container
18/36sets
15/33sets
14/28sets
Band saw machine MJ396
Adopt high linal speed,thin saw blade,smooth cutter and narrow cutting path,saving mater- ial.
Band saw machine MJ396
Saw blade line speed
1800m/min
Max. process width
400mm
Saw wheel diameter
Φ600mm
Working piece height
300mm
Working table size
820*700mm
Total power
5.5kw
Overall size
1000*800*1920mm
weight
400kg
Adopt high linal speed,thin saw blade,smooth cutter and narrow cutting path,saving mater- ial.
Self-correct,cutting path good.
With anti-curve character.
Without cutter broken status.
Adjustable angle scale keeping the cutting path smooth and precise.
Band saw machine MJ396
Saw blade line speed
1800m/min
Max. process width
400mm
Saw wheel diameter
Φ600mm
Working piece height
300mm
Working table size
820*700mm
Total power
5.5kw
Overall size
1000*800*1920mm
weight
400kg
Adopt high linal speed,thin saw blade,smooth cutter and narrow cutting path,saving mater- ial.
Self-correct,cutting path good.
With anti-curve character.
Without cutter broken status.
Adjustable angle scale keeping the cutting path smooth and precise.
Band sawing machine (H-280SA)
Band sawing machine:
1.The P.Fpump can adjust expediently to find the most advantage cutting condition
Band sawing machine:
Item NO:
GH280SA(H-280SA)
Maximum Cutting Capacity
Round
280mm
Square
220*400mm
Rectangle
220*400mm
Saw blade
Speed
28/40/55/68m/min
Size
3505*27*0.9mm
Tension
manual
Guide
TINGS CARBIDE
Cleaning
brush
Motor Output
Saw blade
2.2KW
Hydraulic
0.55KW
Coolant
0.75KW
Tank Capacity
Hydraulic oil
30L
Coolant
45L
Feeding
Mode
manual
Length
1M
Vise Control
hydraulic
N.W/G.W
820KGS/850KGS
Packing Size(L*W*H)
1900*1180*1500mm
Standard Accessories
Bi-metal saw blades,tool box,manual instruction,feeding holder
1.The P.Fpump can adjust expediently to find the most advantage cutting condition
Band sawing machine:
Item NO:
GH280SA(H-280SA)
Maximum Cutting Capacity
Round
280mm
Square
220*400mm
Rectangle
220*400mm
Saw blade
Speed
28/40/55/68m/min
Size
3505*27*0.9mm
Tension
manual
Guide
TINGS CARBIDE
Cleaning
brush
Motor Output
Saw blade
2.2KW
Hydraulic
0.55KW
Coolant
0.75KW
Tank Capacity
Hydraulic oil
30L
Coolant
45L
Feeding
Mode
manual
Length
1M
Vise Control
hydraulic
N.W/G.W
820KGS/850KGS
Packing Size(L*W*H)
1900*1180*1500mm
Standard Accessories
Bi-metal saw blades,tool box,manual instruction,feeding holder
Band sawing machine
Band Sawing Machine
Model
S-280 S-440R H-280 H-400
Band sawing machine
S-200R
Standard Features:
u Two directions angle swivel+45°~0°~+60°with scale indicator
u Blade breakage detector device
u Blade cleaning brush
u Hydraulic flow down feed control
u One piece of bi-metal saw blade
u One set of tools
S-280
Optional Equipment
u Bundle cutting
u Hydraulic blade tension
Standard Features:
u Hydraulic clamping system
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller rack
u One piece of bi-metal saw blade
u One set of tools
S-440R
H-280
Optional Equipment
u Laser projector
u Roller table
Standard Features:
u Two directions angle swivel-60°~0°~+60°with scale indicator
u Blade breakage detector device
u Blade cleaning brush
u Variable vice pressure
u Inverter
u One piece of bi-metal saw blade
u One set of tools
Optional Equipment
u Bundle cutting
u Inverter
u Hydraulic blade tension
u Roller stock table 2M long
u Power roller table 2M long
Standard Features:
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller stock table 1M long
u One piece of bi-metal saw blade
u One set of tools
H-400
H-280HA
Optional Equipment:
u Automatic chip conveyor
u Inverter
u Hydraulic blade tension
u Roller stock table 2M long
u Laser projector
u Power roller table,2Mlong
Standard Features:
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller stock table 1M long
u One piece of bi-metal saw blade
u One set of tools
Optional Equipment
u Automatic chip conveyor
u Laser projector
u Hydraulic blade tensioning
Standard Features:
u Blade cleaning brush
u Working light
u Automatic feed roller 2M long
u Inverter
u One piece of bi-metal saw blade
u One set of tools
u NC control
u Optical Grating measuring system
Model
S-280 S-440R H-280 H-400
Band sawing machine
S-200R
Standard Features:
u Two directions angle swivel+45°~0°~+60°with scale indicator
u Blade breakage detector device
u Blade cleaning brush
u Hydraulic flow down feed control
u One piece of bi-metal saw blade
u One set of tools
S-280
Optional Equipment
u Bundle cutting
u Hydraulic blade tension
Standard Features:
u Hydraulic clamping system
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller rack
u One piece of bi-metal saw blade
u One set of tools
S-440R
H-280
Optional Equipment
u Laser projector
u Roller table
Standard Features:
u Two directions angle swivel-60°~0°~+60°with scale indicator
u Blade breakage detector device
u Blade cleaning brush
u Variable vice pressure
u Inverter
u One piece of bi-metal saw blade
u One set of tools
Optional Equipment
u Bundle cutting
u Inverter
u Hydraulic blade tension
u Roller stock table 2M long
u Power roller table 2M long
Standard Features:
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller stock table 1M long
u One piece of bi-metal saw blade
u One set of tools
H-400
H-280HA
Optional Equipment:
u Automatic chip conveyor
u Inverter
u Hydraulic blade tension
u Roller stock table 2M long
u Laser projector
u Power roller table,2Mlong
Standard Features:
u Blade cleaning brush
u Working light
u Manual feed roller
u Manual work height control
u Length stopper
u Roller stock table 1M long
u One piece of bi-metal saw blade
u One set of tools
Optional Equipment
u Automatic chip conveyor
u Laser projector
u Hydraulic blade tensioning
Standard Features:
u Blade cleaning brush
u Working light
u Automatic feed roller 2M long
u Inverter
u One piece of bi-metal saw blade
u One set of tools
u NC control
u Optical Grating measuring system
Bark removing machine
Bark removing machine can strip the skin of wood logs and can save the manual labour.automatically
Bark removing machine
this machine is used to remove the wood bark .
the materials reuqires the diameter from 3cm~~40cm , the machine can strip wood with diameter about50-400mm, up to the 1.5m length
the peel clean the wood logs and can save the manual labour.automatically .
the capacity can be ordered
,many types can be choosed ,we also c
an product the machine as customer requires
such as the motor ,the capactiy and the machine colour and the logo and so on .
ITEM
Capacity(kgs/hour)
MC size (cm)
Weight(kgs)
Power
2000-1.9
500kgs~~800kgs
300x210
2000
11kw
3000-1.2
2000kgs
450×230
2300
15kw
3000-1.5
3000kgs
600X250
2800
18.5kw
This product is used in various wood stripping, which is the first choice alternative to manual peeling. It is widely used in pulp mills, paper mills and production net chip manufacturers.
Meet a wide range of raw materials, applicable to the limb, curved, irregular wood in the wood, and raw materials stripped over 95% of the net rate, the device has a reasonable structure, easy operation, safe and reliable, easy maintenance, high efficiency work , is currently the alternative to the more advanced artificial stripping stripping equipment.
For the new cutting softwood and some hardwood for peeling treatment can also fulfill some of the frozen material, the dry wood of the peeling treatment.
Bark removing machine
this machine is used to remove the wood bark .
the materials reuqires the diameter from 3cm~~40cm , the machine can strip wood with diameter about50-400mm, up to the 1.5m length
the peel clean the wood logs and can save the manual labour.automatically .
the capacity can be ordered
,many types can be choosed ,we also c
an product the machine as customer requires
such as the motor ,the capactiy and the machine colour and the logo and so on .
ITEM
Capacity(kgs/hour)
MC size (cm)
Weight(kgs)
Power
2000-1.9
500kgs~~800kgs
300x210
2000
11kw
3000-1.2
2000kgs
450×230
2300
15kw
3000-1.5
3000kgs
600X250
2800
18.5kw
This product is used in various wood stripping, which is the first choice alternative to manual peeling. It is widely used in pulp mills, paper mills and production net chip manufacturers.
Meet a wide range of raw materials, applicable to the limb, curved, irregular wood in the wood, and raw materials stripped over 95% of the net rate, the device has a reasonable structure, easy operation, safe and reliable, easy maintenance, high efficiency work , is currently the alternative to the more advanced artificial stripping stripping equipment.
For the new cutting softwood and some hardwood for peeling treatment can also fulfill some of the frozen material, the dry wood of the peeling treatment.
Basic Short Cycle Overlaying Production Line
The production line is suitable for small size plates, with high performance, less investment & quick results advantages etc.
WDT-JXD series of basic short cycle overlaying production line is specially designed for common factories, with easy and reliable operation, high performance, labor-power saving, less investment and quick results advantages. And special designs can also be made according to customers need. It is suitable for decorative lamination on MDF (HDF) boards and particle boards and lamination on laminate composite floor.
WDT-JXD series of basic short cycle overlaying production line is specially designed for common factories, with easy and reliable operation, high performance, labor-power saving, less investment and quick results advantages. And special designs can also be made according to customers need. It is suitable for decorative lamination on MDF (HDF) boards and particle boards and lamination on laminate composite floor.
Beading Router Bit
Beading Router Bit
1.High quality with competitive price,
2.High wear resistance,
3.High-precision .
Beading Router Bit
A fantastic value on high qualitys router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
* K05 and K10 grade carbide for clean cutting action.
*New superior geometric design
*Precision balanced for smooth operation.
*Final sharpening with 800 grit diamond wheels.
*Baked-on anti-stick coating to reduce pitch and resin buildup.
*Longer life time even when working with abrasive materials
*Super clean cuts
* Cost effective
Multi-Fluting Bit
Part No.
Size
D
H
R
PICTURE
YR090140708
1/4×7/8
20.66
22.2
2.38
YR090141000
1/4×1
22.2
25.4
3.17
YR090120708
1/2×7/8
20.66
22.2
2.38
YR0901201000
1/2×1
22.2
25.4
3.17
YR090121316
1/2×1-3/16
23.82
30.16
3.96
YR090121308
1/2×1-3/8
25.42
34.9
4.76
Multi-Beading Bit
Part No.
Size
D
H
R
PICTURE
YR090240708
1/4×7/8
20.66
22.2
2.38
YR090241000
1/4×1
22.2
25.4
3.17
YR090220708
1/2×7/8
20.66
22.2
2.38
YR090221000
1/2×1
22.2
25.4
3.17
YR090221108
1/2×1-1/8
23.02
28.6
3.56
YR090221104
1/2×1-1/4
23.82
31.7
3.96
YR090221308
1/2×1-3/8
24.62
34.9
4.36
YR090221716
1/2×1-7/16
25.42
36.51
4.76
Double Beading Bit
Part No.
Size
D
H
R
PICTURE
YR090440104
1/4×1/4
22.2
19.05
3.17
YR090440516
1/4×5/16
23.86
22.98
3.96
YR090440308
1/4×3/8
25.4
26.18
4.76
YR090420104
1/2×1/4
22.2
19.05
3.17
YR090420516
1/2×5/16
23.86
22.98
3.96
YR090420308
1/2×3/8
25.4
26.18
4.76
YR090420102
1/2×1/2
28.6
34.4
6.35
YR090420508
1/2×5/8
31.8
40.8
7.96
YR090420304
1/2×3/4
34.94
47.1
9.52
According to your requirement, any other size and different treatment on the surface of the bits can be ma
1.High quality with competitive price,
2.High wear resistance,
3.High-precision .
Beading Router Bit
A fantastic value on high qualitys router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
* K05 and K10 grade carbide for clean cutting action.
*New superior geometric design
*Precision balanced for smooth operation.
*Final sharpening with 800 grit diamond wheels.
*Baked-on anti-stick coating to reduce pitch and resin buildup.
*Longer life time even when working with abrasive materials
*Super clean cuts
* Cost effective
Multi-Fluting Bit
Part No.
Size
D
H
R
PICTURE
YR090140708
1/4×7/8
20.66
22.2
2.38
YR090141000
1/4×1
22.2
25.4
3.17
YR090120708
1/2×7/8
20.66
22.2
2.38
YR0901201000
1/2×1
22.2
25.4
3.17
YR090121316
1/2×1-3/16
23.82
30.16
3.96
YR090121308
1/2×1-3/8
25.42
34.9
4.76
Multi-Beading Bit
Part No.
Size
D
H
R
PICTURE
YR090240708
1/4×7/8
20.66
22.2
2.38
YR090241000
1/4×1
22.2
25.4
3.17
YR090220708
1/2×7/8
20.66
22.2
2.38
YR090221000
1/2×1
22.2
25.4
3.17
YR090221108
1/2×1-1/8
23.02
28.6
3.56
YR090221104
1/2×1-1/4
23.82
31.7
3.96
YR090221308
1/2×1-3/8
24.62
34.9
4.36
YR090221716
1/2×1-7/16
25.42
36.51
4.76
Double Beading Bit
Part No.
Size
D
H
R
PICTURE
YR090440104
1/4×1/4
22.2
19.05
3.17
YR090440516
1/4×5/16
23.86
22.98
3.96
YR090440308
1/4×3/8
25.4
26.18
4.76
YR090420104
1/2×1/4
22.2
19.05
3.17
YR090420516
1/2×5/16
23.86
22.98
3.96
YR090420308
1/2×3/8
25.4
26.18
4.76
YR090420102
1/2×1/2
28.6
34.4
6.35
YR090420508
1/2×5/8
31.8
40.8
7.96
YR090420304
1/2×3/4
34.94
47.1
9.52
According to your requirement, any other size and different treatment on the surface of the bits can be ma
Beam saw
Beam saw/ computer panel saw / Saw
Beam saw
Model No:
MTSK260
Technical Parameters
Model
MTSK260
MTSK320
MTSK380
Gross weight
4200KG
4500KG
5000KG
Workbench size
2600MM
3200MM
3800MM
Machine length
4630MM × 5500MM
5230MM × 6400MM
5830MM × 5500MM
Pressure
6kg/cm2
6kg/cm2
6kg/cm2
Power supply
380V
380V
380V
main motor power
7.5KW
7.5KW
7.5KW
feeding driving power
1.5KW
1.5KW
1.5KW
feeder power
1KW
1.5KW
2KW
saw blade projectin height
≤80MM
≤80MM
≤80MM
cutting length
2440MM
3050MM
3660MM
cutting speed
0-50M/MIN
0-50M/MIN
0-50M/MIN
cutting straightness precision
0.20MM/2440MM
0.20MM/2440MM
0.20MM/2440MM
feeding precision
±0.3MM
±0.3MM
±0.3MM
catercorner precision
1200/2400 0.7MM
1200/2400 0.7MM
1200/2400 0.7MM
feeding speed
25~ 30M /MIN
25~ 30M /MIN
25~ 30M /MIN
feeding length
2440MM
3050MM
3670MM
pneumatic unit
Taiwan Actac
electric units
Touch screen servo motor servo driver tranducer PLC and text display are all made in TAIWAN; swiches and AC contactor: from France, stroke switch: Japan. Motor made in China
feeding and returning convey mode
gear and rack
speed adjust
transducer
feeding rack
pneumatic floating beads
positioning mode
pulse servo position control
main saw size
Outer diameter φ 350MM inner diameter φ 30MM thickness 4.4MM
scoring saw size
Outer diameter φ 1800MM inner diameter φ 30MM thickness 4.3 -5.3MM
assistant saw size
Outer diameter φ 280MM inner diameter φ 30MM thickness 4.4MM
main saw rotation
5000rpm
scoring saw rotation
7000rpm
The above data is for reference. Any modification is subject to the real products
Beam saw/ Saw / Computer panel saw / Panel saw
Characteristics:
Auto detectio nof plates, return to origianl operation condition soon after the cutting of plates required.
The speed of cutting is cont no lled by inverter, applicable to plates of different thickness and quality.
Feeding by preunmatic float ball table, for easy operation of thick plates.
Auto feeding by robboot, with low labor streng thand high productione fficiency.
Original computer digital control auto position to stop artificiale rrors and greatly improve the precision of dimension.
The perfect completion of follow-up dustcollection system, to fully satisfy your demend on highquality.
Beam saw, panel saw, table saw .
We also can supply other furniture making machines like cnc router, edge bander, drilling machine, dust collector, vacuum press machine and etc.
Beam saw
Model No:
MTSK260
Technical Parameters
Model
MTSK260
MTSK320
MTSK380
Gross weight
4200KG
4500KG
5000KG
Workbench size
2600MM
3200MM
3800MM
Machine length
4630MM × 5500MM
5230MM × 6400MM
5830MM × 5500MM
Pressure
6kg/cm2
6kg/cm2
6kg/cm2
Power supply
380V
380V
380V
main motor power
7.5KW
7.5KW
7.5KW
feeding driving power
1.5KW
1.5KW
1.5KW
feeder power
1KW
1.5KW
2KW
saw blade projectin height
≤80MM
≤80MM
≤80MM
cutting length
2440MM
3050MM
3660MM
cutting speed
0-50M/MIN
0-50M/MIN
0-50M/MIN
cutting straightness precision
0.20MM/2440MM
0.20MM/2440MM
0.20MM/2440MM
feeding precision
±0.3MM
±0.3MM
±0.3MM
catercorner precision
1200/2400 0.7MM
1200/2400 0.7MM
1200/2400 0.7MM
feeding speed
25~ 30M /MIN
25~ 30M /MIN
25~ 30M /MIN
feeding length
2440MM
3050MM
3670MM
pneumatic unit
Taiwan Actac
electric units
Touch screen servo motor servo driver tranducer PLC and text display are all made in TAIWAN; swiches and AC contactor: from France, stroke switch: Japan. Motor made in China
feeding and returning convey mode
gear and rack
speed adjust
transducer
feeding rack
pneumatic floating beads
positioning mode
pulse servo position control
main saw size
Outer diameter φ 350MM inner diameter φ 30MM thickness 4.4MM
scoring saw size
Outer diameter φ 1800MM inner diameter φ 30MM thickness 4.3 -5.3MM
assistant saw size
Outer diameter φ 280MM inner diameter φ 30MM thickness 4.4MM
main saw rotation
5000rpm
scoring saw rotation
7000rpm
The above data is for reference. Any modification is subject to the real products
Beam saw/ Saw / Computer panel saw / Panel saw
Characteristics:
Auto detectio nof plates, return to origianl operation condition soon after the cutting of plates required.
The speed of cutting is cont no lled by inverter, applicable to plates of different thickness and quality.
Feeding by preunmatic float ball table, for easy operation of thick plates.
Auto feeding by robboot, with low labor streng thand high productione fficiency.
Original computer digital control auto position to stop artificiale rrors and greatly improve the precision of dimension.
The perfect completion of follow-up dustcollection system, to fully satisfy your demend on highquality.
Beam saw, panel saw, table saw .
We also can supply other furniture making machines like cnc router, edge bander, drilling machine, dust collector, vacuum press machine and etc.
Bean Stalk Granuling machine
Wood Sawdust Granuling machine
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
1325-ATC woodworking cnc router from jinan
1325-ATC woodworking cnc router from jinan
1300x2500mm
ballscrew for Z,gearwheel for XY
square guide,vacuum hold down
CE
1325-ATC woodworking cnc router from jinan
Using industry:
Create Star XK1325ATC-0808 Gantry-type CNC maching center is designed for the customers for a high standard, high demand, high degree of automation. Suitable for large-volume, all-weather processing of non-ferrous, metal plate.
Funiture and Decoration: A large area flat plate engraving, wood, panel furniture carving, wood art murals, wood door, cabinet door sculpture.
Wood Product Industy: Sewing machine table, electrical counter face, sports equipment
Musical Instrument Industry: Three-dimensional surface can be carved musical instruments, shape cutting.
Model Features
1. Structural stability: Industry into the production model, heavy-duty full steel frame structure, welding, tempering efficient vector processing, solid non-deformed.
2. Good Parts: Taiwan LNC system, Italy HSD spindle motor.And the spindle bearings for high-precision ceramic bearings, low noise, long life.
Adopted from, Taiwan Hiwin 30 linear rail,ball screw from Germany, bearing force, under the knife and accurate
To adopt Japanese Yaskawa servo drive system, torque and has a perfect security system.
3. Modular structure design: Select and add a variety of machining spindle configuration, can be sculpture, engraving, milling work.
4. A simple and secure mode of operation, advanced document pre-processing to ensure the speed and accuracy of operation
5. Automatic tool changing system , knife storage capacity 8 (Optional)
6. High adhesion, vacuum suction device, the displacement of up to 230 cubic meters / hour
7. Compatible: Open software interface, compatible with type3/arteam/castmate / Wentai a variety of CAD / CAM design software generate the processing code, to ensure the design of barrier-free.
Main technical parameters
Table Size
1350*3100mm
X.Y.X axis working area:
1300*2500*200mm
Reposition accuracy:
±0.02mm
Max material height:
300mm
Spindle Power
8KW
Spindle Speed:
18000rpm/Min
Max-speed:
60000mm/Min
Max-cutting speed:
35000mm/Min
System Resolution
±0.002mm
Working voltage
AC380V/50HZ-60HZ 3-phase
Command Code
HPGL/G Code
Controls
LNC510i system/TaiWan
Drive motors
Servo
sample products
1300x2500mm
ballscrew for Z,gearwheel for XY
square guide,vacuum hold down
CE
1325-ATC woodworking cnc router from jinan
Using industry:
Create Star XK1325ATC-0808 Gantry-type CNC maching center is designed for the customers for a high standard, high demand, high degree of automation. Suitable for large-volume, all-weather processing of non-ferrous, metal plate.
Funiture and Decoration: A large area flat plate engraving, wood, panel furniture carving, wood art murals, wood door, cabinet door sculpture.
Wood Product Industy: Sewing machine table, electrical counter face, sports equipment
Musical Instrument Industry: Three-dimensional surface can be carved musical instruments, shape cutting.
Model Features
1. Structural stability: Industry into the production model, heavy-duty full steel frame structure, welding, tempering efficient vector processing, solid non-deformed.
2. Good Parts: Taiwan LNC system, Italy HSD spindle motor.And the spindle bearings for high-precision ceramic bearings, low noise, long life.
Adopted from, Taiwan Hiwin 30 linear rail,ball screw from Germany, bearing force, under the knife and accurate
To adopt Japanese Yaskawa servo drive system, torque and has a perfect security system.
3. Modular structure design: Select and add a variety of machining spindle configuration, can be sculpture, engraving, milling work.
4. A simple and secure mode of operation, advanced document pre-processing to ensure the speed and accuracy of operation
5. Automatic tool changing system , knife storage capacity 8 (Optional)
6. High adhesion, vacuum suction device, the displacement of up to 230 cubic meters / hour
7. Compatible: Open software interface, compatible with type3/arteam/castmate / Wentai a variety of CAD / CAM design software generate the processing code, to ensure the design of barrier-free.
Main technical parameters
Table Size
1350*3100mm
X.Y.X axis working area:
1300*2500*200mm
Reposition accuracy:
±0.02mm
Max material height:
300mm
Spindle Power
8KW
Spindle Speed:
18000rpm/Min
Max-speed:
60000mm/Min
Max-cutting speed:
35000mm/Min
System Resolution
±0.002mm
Working voltage
AC380V/50HZ-60HZ 3-phase
Command Code
HPGL/G Code
Controls
LNC510i system/TaiWan
Drive motors
Servo
sample products
Friday, March 25, 2011
Bean Stalk Granuling machine
1,Low cost,high profit
2,Save work force and power
3,Easy maitain and operate
Flat die pellet press is designed for raw materials and biomass that develop a new pellet press machine. It is available to process wood chips, straw, chaff, bamboo shavings, peanut shells, bagasse, alfalfa and other raw materials.
Performance Features:
1. Transmission gears made of high quality alloy steel, surface adopts carburizing and quenching treatment, precision machining by grinding, smooth transmission, low noise, large carrying capacity, low temperature rise, long life etc.
2. Spindle with a heavy thrust bearing, support axial force, long life.
3. Pellet press uses large diameter roller, big yield, pelletizing rate is high, uniform high strength pellets.
4. Roller and flat die wear peace deal, both sides can use the flat die, long service life.
5. All bearings are sealed structure that effectively prevent dust, improve the working bearings environment, extending bearing life.
6. Pellets diameter are from 6-12mm for user select.
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
kL200B
3-phases 7.5kW
200-300
1000x430x950
200/230
With motor
kL200B
200-300
900x430x950
w/o motor
kL230B
3 phases 11kw
300-400
1140x470x970
290/320
With motor
kL230B
300-400
980x470x870
w/o motor
kL260B
3 phases 15kw
400-600
1200x500x1070
330/360
With motor
kL260B
400-600
1120x490x1070
w/o motor
kL300B
3 phases,22kW
700-800
1270x520x1070
410/450
With motor
kL300B
700-800
1170x520x1070
w/o motor
kL360
3-phases 22kW
1270x520x1070
470/500
With motor
KL360
1270x520x1070
w/o motor
KL400
3 phases,30KW
900-1100
1470x600x1150
550/585
With motor
KL400
900-1100
1470x600x1150
w/o motor
2,Save work force and power
3,Easy maitain and operate
Flat die pellet press is designed for raw materials and biomass that develop a new pellet press machine. It is available to process wood chips, straw, chaff, bamboo shavings, peanut shells, bagasse, alfalfa and other raw materials.
Performance Features:
1. Transmission gears made of high quality alloy steel, surface adopts carburizing and quenching treatment, precision machining by grinding, smooth transmission, low noise, large carrying capacity, low temperature rise, long life etc.
2. Spindle with a heavy thrust bearing, support axial force, long life.
3. Pellet press uses large diameter roller, big yield, pelletizing rate is high, uniform high strength pellets.
4. Roller and flat die wear peace deal, both sides can use the flat die, long service life.
5. All bearings are sealed structure that effectively prevent dust, improve the working bearings environment, extending bearing life.
6. Pellets diameter are from 6-12mm for user select.
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
kL200B
3-phases 7.5kW
200-300
1000x430x950
200/230
With motor
kL200B
200-300
900x430x950
w/o motor
kL230B
3 phases 11kw
300-400
1140x470x970
290/320
With motor
kL230B
300-400
980x470x870
w/o motor
kL260B
3 phases 15kw
400-600
1200x500x1070
330/360
With motor
kL260B
400-600
1120x490x1070
w/o motor
kL300B
3 phases,22kW
700-800
1270x520x1070
410/450
With motor
kL300B
700-800
1170x520x1070
w/o motor
kL360
3-phases 22kW
1270x520x1070
470/500
With motor
KL360
1270x520x1070
w/o motor
KL400
3 phases,30KW
900-1100
1470x600x1150
550/585
With motor
KL400
900-1100
1470x600x1150
w/o motor
Bean Stalk Granuling machine
1,Low cost,high profit
2,Save work force and power
3,Easy maitain and operate
All models above can process both animal feedstuff and wood pellet from sawdust. If you only use the machine to produce feedstuff, there are four smaller models for your reference as follows:
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
ZLSP120
3kw 3-phases or 2.2 kw single phase
75-100
710x390x910
80/100
With motor
ZLSP120
75-100
670x390x910
w/o motor
ZLSP120A
8hp diesel
75-100
730x320x670
w/o diesel
ZLSP120A
75-100
900x440x730
120/140
With diesel
ZLSP150
4kw 3-phase
90-120
750x350x650
95/115
With motor
ZLSP150
90-120
700×350×650
w/o motor
2,Save work force and power
3,Easy maitain and operate
All models above can process both animal feedstuff and wood pellet from sawdust. If you only use the machine to produce feedstuff, there are four smaller models for your reference as follows:
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
ZLSP120
3kw 3-phases or 2.2 kw single phase
75-100
710x390x910
80/100
With motor
ZLSP120
75-100
670x390x910
w/o motor
ZLSP120A
8hp diesel
75-100
730x320x670
w/o diesel
ZLSP120A
75-100
900x440x730
120/140
With diesel
ZLSP150
4kw 3-phase
90-120
750x350x650
95/115
With motor
ZLSP150
90-120
700×350×650
w/o motor
Bean Stalk Granuling machine
Wood Sawdust Granuling machine
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Bean Stalk Pellet Mill
Bean Stalk Pellet Mill
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Lower friction and energy consumption, higher capacity;
Producing granule fuel
Straw and stalk fuel (namely biomass fuel) make fully use of solid wastes, such as maize stalk, wheat straw, rice straw, peanut sheel, maize padding,cotton stalk, soybean stalk, grass, tree branch and leaves, saw dust, bark, etc. to produce solid rod shape granule fuel through crushing, pressing and forming.?
Technological process: Collecting raw materials→raw materials crushing→making granule and forming→finished products
Biomass fuel (straw and stalk) features: Higher specific gravity, small volume, longer combustion time, easy storage and transportation. Its volume is 1/30-1/40 of the raw materials, and the specific gravity is 10-15 times higher than that of the raw materials (density is 0.8-1.4), and its heat value is about 3400-6000 great calorie.?
Biomass fuel (straw and stalk) applications: As a new type biomass fuel, it can substitute wood, raw coal, fuel oil, and liquid gas, etc. and widely used in warming, cooking, water heater, biomass power plant, etc.
Granule Forming machine
Features:
Lower friction and energy consumption, higher capacity;
Producing granule fuel, ball type organic fertilizer, biomass organic fertilizer of even and slippery granule with higher density and good fluidness;
Widely used in granule forming of breeding plant, feedingstuff plant and many industry such as brewage, refine sugar, paper making, medicine, tobacco, etc. and it is the idea equipments of biomass organic fertilizer producing enterprise
Model
Capacity (MT/h)
Power (KW)
Note
SKJ105
0.05
2.2
Belt transmission
SKJ120
0.05-0.08
2.2-3
Belt transmission
SKJ150
0.15-0.3
7.5
transmission shaft transmission, amphibious
SKJ200
0.25-0.5
11
transmission shaft transmission, amphibious
SKJ250
0.4-0.8
15
transmission shaft transmission
SKJ350
0.6-1.2
22
transmission shaft transmission
This model, based on absorbing succeeded experiences both at home and aboard, adopt studded rotating roller plate with pressing roller random adjusting when operation, and the main function have reach international advanced level;
Adopting compelling feeding system with overloading protection equipments;
Adopting modulator of big diameter to guarantee the materials fully slaking and granule more smoothing,and the forming ration reach 98%,and the wearing ratio can also cut down to lower level;
Adopting speed regulation feeding system to guarantee accurately controlling feeding quantity, and meet the demand of feeding different materials and producing variety of diameters.
Model
Power, KW
Capacity, MT
Weight, MT
Floor space, mm
450
37
1-2
1.9
1600*1200*1800
550
45
1
2.6
1900*1200*2200
Bean Stalk Pellet Mill
1,Low cost,high profit
2,Save work force and power
3,Easy maitain and operate
All models above can process both animal feedstuff and wood pellet from sawdust. If you only use the machine to produce feedstuff, there are four smaller models for your reference as follows:
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
ZLSP120
3kw 3-phases or 2.2 kw single phase
75-100
710x390x910
80/100
With motor
ZLSP120
75-100
670x390x910
w/o motor
ZLSP120A
8hp diesel
75-100
730x320x670
w/o diesel
ZLSP120A
75-100
900x440x730
120/140
With diesel
ZLSP150
4kw 3-phase
90-120
750x350x650
95/115
With motor
ZLSP150
90-120
700×350×650
w/o motor
2,Save work force and power
3,Easy maitain and operate
All models above can process both animal feedstuff and wood pellet from sawdust. If you only use the machine to produce feedstuff, there are four smaller models for your reference as follows:
Type
Power (Kw)
Capacity
Dimension (mm)
NG/GW
(kg)
Note
ZLSP120
3kw 3-phases or 2.2 kw single phase
75-100
710x390x910
80/100
With motor
ZLSP120
75-100
670x390x910
w/o motor
ZLSP120A
8hp diesel
75-100
730x320x670
w/o diesel
ZLSP120A
75-100
900x440x730
120/140
With diesel
ZLSP150
4kw 3-phase
90-120
750x350x650
95/115
With motor
ZLSP150
90-120
700×350×650
w/o motor
Beijing cnc engraving machine
High performance,best select service competitive price custom made.short delivery time
Features
1. processing materialwood,resin,acrylic,polypropylene,plexiglass,plastic,soft metal,PVC,gypsum,rubber,
2. driving mode:stepping drive.Ball screw of three axis,flexible ans speed
3. machine characteristics:cylinder clamp separately designed,it can match any machinefrom our company
4. applicable industries:cylinder relief engraving,wood furniture,technic door and window,alumium processing,arts and crafts,musical instrument,ect.
Performance parameter
Outer dimension
1800*680*1700mm
Work table area
680*1500mm
Working travel
200*800mm
Repositioning Accuracy
0.025mm
Spindle power
1.5/ 2.2KW()
Work voltage
220V/50Hz
Running speed
18m/min
Spindle rotation speed
6000-24000rpm/min
Cutter diameter
3.175 4 6 12.7
Engraving dictate
G code,uoo,mmg,plt
Features
1. processing materialwood,resin,acrylic,polypropylene,plexiglass,plastic,soft metal,PVC,gypsum,rubber,
2. driving mode:stepping drive.Ball screw of three axis,flexible ans speed
3. machine characteristics:cylinder clamp separately designed,it can match any machinefrom our company
4. applicable industries:cylinder relief engraving,wood furniture,technic door and window,alumium processing,arts and crafts,musical instrument,ect.
Performance parameter
Outer dimension
1800*680*1700mm
Work table area
680*1500mm
Working travel
200*800mm
Repositioning Accuracy
0.025mm
Spindle power
1.5/ 2.2KW()
Work voltage
220V/50Hz
Running speed
18m/min
Spindle rotation speed
6000-24000rpm/min
Cutter diameter
3.175 4 6 12.7
Engraving dictate
G code,uoo,mmg,plt
Belt Conveyer
As per to the need of conveying material of the production lline, we design and produce various kinds of belt conveyors.
As per to the need of conveying material of the production lline, we design and produce various kinds of belt conveyors. If the customor will buy our whole set of pellet equipments with request of making the belt conveyor on site, we can support design parameters and schematic diagrams.
As per to the need of conveying material of the production lline, we design and produce various kinds of belt conveyors. If the customor will buy our whole set of pellet equipments with request of making the belt conveyor on site, we can support design parameters and schematic diagrams.
Belt Sander (ISO Approved)
1. Belt sander
2. ISO9001:2000 Approved
3. Fixed thickness
4. Fine sanding
5. Quality assurance
Belt sander
Broad belt sander BSG2210R-RP series
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
BSG2210R-RP
BSG2210R-P
Max.working width
1000mm
1000mm
Working thickness
2.5-80mm
2.5-80mm
Sanding length
>500mm
>500mm
Size of abrasive belt
1020×2200mm
1020×2200mm
Working air pressure
O.0.8MPa
O.0.8MPa
Speed of abrasive belt
1518.5m/s
1518.5m/s
Speed of feed belt
5.5-28m/min
5.5-28m/min
Motor for sanding head
1511kW
157.5kW
Motor for feeding
2.2kW
2.2kW
Motor for brush
0.37kW
0.37kW
Motor for lifting
0.18kW
0.18kW
Total motor power
28.75kW
25.25kW
Overall dimensions[L×W×H]
2100×1600×2100mm
2100×1600×2100mm
Net Weight
2200kg
2200kg
2. ISO9001:2000 Approved
3. Fixed thickness
4. Fine sanding
5. Quality assurance
Belt sander
Broad belt sander BSG2210R-RP series
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
BSG2210R-RP
BSG2210R-P
Max.working width
1000mm
1000mm
Working thickness
2.5-80mm
2.5-80mm
Sanding length
>500mm
>500mm
Size of abrasive belt
1020×2200mm
1020×2200mm
Working air pressure
O.0.8MPa
O.0.8MPa
Speed of abrasive belt
1518.5m/s
1518.5m/s
Speed of feed belt
5.5-28m/min
5.5-28m/min
Motor for sanding head
1511kW
157.5kW
Motor for feeding
2.2kW
2.2kW
Motor for brush
0.37kW
0.37kW
Motor for lifting
0.18kW
0.18kW
Total motor power
28.75kW
25.25kW
Overall dimensions[L×W×H]
2100×1600×2100mm
2100×1600×2100mm
Net Weight
2200kg
2200kg
Belt Sander
Belt sander
2) ISO9001:2000 Approved
3) Fixed thickness
4) Fine sanding
5) Quality assurance
Belt sander
Broad belt sander BSG2210R-RP series
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
BSG2210R-RP
BSG2210R-P
Max.working width
1000mm
1000mm
Working thickness
2.5-80mm
2.5-80mm
Sanding length
>500mm
>500mm
Size of abrasive belt
1020×2200mm
1020×2200mm
Working air pressure
O.0.8MPa
O.0.8MPa
Speed of abrasive belt
1518.5m/s
1518.5m/s
Speed of feed belt
5.5-28m/min
5.5-28m/min
Motor for sanding head
1511kW
157.5kW
Motor for feeding
2.2kW
2.2kW
Motor for brush
0.37kW
0.37kW
Motor for lifting
0.18kW
0.18kW
Total motor power
28.75kW
25.25kW
Overall dimensions[L×W×H]
2100×1600×2100mm
2100×1600×2100mm
Net Weight
2200kg
2200kg
2) ISO9001:2000 Approved
3) Fixed thickness
4) Fine sanding
5) Quality assurance
Belt sander
Broad belt sander BSG2210R-RP series
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
BSG2210R-RP
BSG2210R-P
Max.working width
1000mm
1000mm
Working thickness
2.5-80mm
2.5-80mm
Sanding length
>500mm
>500mm
Size of abrasive belt
1020×2200mm
1020×2200mm
Working air pressure
O.0.8MPa
O.0.8MPa
Speed of abrasive belt
1518.5m/s
1518.5m/s
Speed of feed belt
5.5-28m/min
5.5-28m/min
Motor for sanding head
1511kW
157.5kW
Motor for feeding
2.2kW
2.2kW
Motor for brush
0.37kW
0.37kW
Motor for lifting
0.18kW
0.18kW
Total motor power
28.75kW
25.25kW
Overall dimensions[L×W×H]
2100×1600×2100mm
2100×1600×2100mm
Net Weight
2200kg
2200kg
Belt Sanding (ISO Approved) 2206
1) Belt sanding
2) ISO9001:2000 Approved
3) Fixed thickness
4) Fine sanding
5) Quality assurance
Belt sanding
Broad belt sander BSG2206R-RP
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
Max.working width
630mm
Working thickness
2.5-80mm
Sanding length
>420mm
Size of abrasive belt
670×1800mm
Working air pressure
O.0.8MPa
Speed of abrasive belt
1512m/s
Speed of feed belt
5.5-28m/min
Motor for sanding head
117.5kW
Motor for feeding
1.5kW
Motor for brush
0.18kW
Motor for lifting
0.18kW
Total motor power
20.36kw
Overall dimensions[L×W×H]
2020×1200×1900mm
Net weight
1100kg
2) ISO9001:2000 Approved
3) Fixed thickness
4) Fine sanding
5) Quality assurance
Belt sanding
Broad belt sander BSG2206R-RP
It can sand the following boards intensively or according to the required thickness:solid-wood board, veneer, flakeboard, fiberboard, semi-density flakeboard, affixed flakeboard, affixed air board, affixed veneer, etc.
Main parameters:
Max.working width
630mm
Working thickness
2.5-80mm
Sanding length
>420mm
Size of abrasive belt
670×1800mm
Working air pressure
O.0.8MPa
Speed of abrasive belt
1512m/s
Speed of feed belt
5.5-28m/min
Motor for sanding head
117.5kW
Motor for feeding
1.5kW
Motor for brush
0.18kW
Motor for lifting
0.18kW
Total motor power
20.36kw
Overall dimensions[L×W×H]
2020×1200×1900mm
Net weight
1100kg
1326 Woodworking CNC Router
Woodworking CNC Router
1300*2600mm working size
design--ArtCAM ,TYPE3
control--NCstudio,DSP
cetification--CE
Woodworking CNC Router
(OEM is available)
Model:
JC-1326
Machine body:
Whole cast iron
Guideway:
XYZ-axis use Linear guideway
Driving mode :
rack
X,Y-axis working area :
1300*2600mm
Z-axis working area:
300 or 250 mm
Max. Feeding height:
120mm or bigger
Cut thickness of material:
≤100mm
Max. Speed:
25000mm/min
Working speed :
0-12000mm/min
Mechanical precision:
0.01mm
Compatible Software:
Type 3 software , Artcut software , Artcam software
Power source:
AC220/50HZ or 380V/50HZ
Driver type:
Stepper motor
Memory:
Without or DSP
Spindle:
3.0KW variable speed , water-cooled motor
Spindle speed:
0-24000rpm
Blade diameter:
3.175mm,4mm,6mm,12mm or 12.7mm
Control system:
NCSTUDIO or DSP(USB interface)
Command:
G code ,u00,mmg,plt,HPGL
Optional:
Rotary axis , vacuum table and dust collector
Applications:
advertisement engraving, advertisement cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment, mold processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.
Freight
:
we can send the machine by sea to your seaport or to your door,but I'm afraid we have to charge you the freight . Please tell us your nearst port or zip code,then we can check the boat details for you.
working samples:
Dear customer ,we still have belowing models wood cnc router machine :
1.1200*1200mm(JC-1212)
2.1200*1800mm(JC-1218)
3.1200*2400mm(JC-1224)
4.1300*2500mm(JC-1325)
Pls select your needing models cnc router and send inquiry to us about the stone cnc engraving machine , we will reply you within 24 hours
at work day !
Contact person : Sunny Wang
1325H heavy duty cnc router (1300*2500mm):
1300*2600mm working size
design--ArtCAM ,TYPE3
control--NCstudio,DSP
cetification--CE
Woodworking CNC Router
(OEM is available)
Model:
JC-1326
Machine body:
Whole cast iron
Guideway:
XYZ-axis use Linear guideway
Driving mode :
rack
X,Y-axis working area :
1300*2600mm
Z-axis working area:
300 or 250 mm
Max. Feeding height:
120mm or bigger
Cut thickness of material:
≤100mm
Max. Speed:
25000mm/min
Working speed :
0-12000mm/min
Mechanical precision:
0.01mm
Compatible Software:
Type 3 software , Artcut software , Artcam software
Power source:
AC220/50HZ or 380V/50HZ
Driver type:
Stepper motor
Memory:
Without or DSP
Spindle:
3.0KW variable speed , water-cooled motor
Spindle speed:
0-24000rpm
Blade diameter:
3.175mm,4mm,6mm,12mm or 12.7mm
Control system:
NCSTUDIO or DSP(USB interface)
Command:
G code ,u00,mmg,plt,HPGL
Optional:
Rotary axis , vacuum table and dust collector
Applications:
advertisement engraving, advertisement cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment, mold processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.
Freight
:
we can send the machine by sea to your seaport or to your door,but I'm afraid we have to charge you the freight . Please tell us your nearst port or zip code,then we can check the boat details for you.
working samples:
Dear customer ,we still have belowing models wood cnc router machine :
1.1200*1200mm(JC-1212)
2.1200*1800mm(JC-1218)
3.1200*2400mm(JC-1224)
4.1300*2500mm(JC-1325)
Pls select your needing models cnc router and send inquiry to us about the stone cnc engraving machine , we will reply you within 24 hours
at work day !
Contact person : Sunny Wang
1325H heavy duty cnc router (1300*2500mm):
Benzine type Swing Blade Sawmill 30HP
Benzine type Swing Blade Sawmill
Manageable log diameter max:1500mm
Engine:11kwelectric motor
Benzine type Swing Blade Sawmill
model:30HP
Swing Blade Sawmill is designed and produced by the company according to the African and South American jungle terrain, aiming to saw mahogany,teak and other hard timbers, and based on foreign technical drawings. It is easy to move and to be installed, its power can be generated by gasoline or electricity, customers can directly process timbers into logs or semi finished materials of floor wood at the logging areas. It is the ideal equipment for mountainous areas and wood processing enterprises.
Technical parameters
11KW Model
Manageable log diameter max
1500mm
Engine
30H/P electric start,
USA Kohler V-twin, petrol
Saw-cut dimensions max.
Up to 180mm x 180mm
Saw blades
5 tooth TCT 3.6mm plate
Processable log length
4000mm
Machine weight
600KG
Manageable log diameter max:1500mm
Engine:11kwelectric motor
Benzine type Swing Blade Sawmill
model:30HP
Swing Blade Sawmill is designed and produced by the company according to the African and South American jungle terrain, aiming to saw mahogany,teak and other hard timbers, and based on foreign technical drawings. It is easy to move and to be installed, its power can be generated by gasoline or electricity, customers can directly process timbers into logs or semi finished materials of floor wood at the logging areas. It is the ideal equipment for mountainous areas and wood processing enterprises.
Technical parameters
11KW Model
Manageable log diameter max
1500mm
Engine
30H/P electric start,
USA Kohler V-twin, petrol
Saw-cut dimensions max.
Up to 180mm x 180mm
Saw blades
5 tooth TCT 3.6mm plate
Processable log length
4000mm
Machine weight
600KG
Best Price Wood Cutting And Engraving Machine
All with round guides
Axis under the control of software
with two motors and two rack driving
2.2kw water cooling spindle
QL-1325-I Woodworking CNC Router
Details:
1, imported straight square Guides, double-row ball slider 4, the loading capacity, smooth operation, high accuracy and long life. Import high precision ball screw, knife precision.
2, computer completely divorced from remote operation of USB interface DSP operating system, grip-type operation, operating more simple, more human design, unique intelligent budget rules, and give full play to electrical potential, high-speed processing, Qu Linear Synchronous, perfect curve, not computer memory and achieve cutting from spindle automatic suspension.
3, software compatible with type3/Artcam/Castmate/Wentai, other CAD/CAM design software.
4, high-speed drive stepper motor and drive, a double-Y-axis motor drive, high-speed operation up to 35m/min empty row over speed with cutting vigorously carved spindle speed can improve more.
The main application field of industry:
1, Woodworking: Three-dimensional wave plate processing, cupboard doors, wooden doors, wooden doors process, screens, process window processing, video game cabinets and panels, computer table and plate Auxiliary furniture products processing.
2, advertising industry: Advertising signs, logo production, acrylic cutting, forming system module, a variety of materials advertising the production of decorative products.
3, die industry: A sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, other industries: A variety of large-scale relief sculpture, video carving, widely used in process industries gifts.
Characteristics:
Woodworking series is the Super Star in the woodworking industry in the use of the large signs for a major production, the characters a high-speed cutting machines.
1, billboard industry: characters cutting, plate production, LED / neon channel, literal-hole cut, blister Lightbox mold production.
2, spindle running software control, automation strong.
3, speed, high efficiency, air speed-up to 8 m / min above.
4, spindle power, steel and good.
5, dual-motor drive, a unique dual-axis drive tooth strength of the large, smooth transmission, high-speed operation of the guarantee is not a long time deformation, jitter.
Axis under the control of software
with two motors and two rack driving
2.2kw water cooling spindle
QL-1325-I Woodworking CNC Router
Details:
1, imported straight square Guides, double-row ball slider 4, the loading capacity, smooth operation, high accuracy and long life. Import high precision ball screw, knife precision.
2, computer completely divorced from remote operation of USB interface DSP operating system, grip-type operation, operating more simple, more human design, unique intelligent budget rules, and give full play to electrical potential, high-speed processing, Qu Linear Synchronous, perfect curve, not computer memory and achieve cutting from spindle automatic suspension.
3, software compatible with type3/Artcam/Castmate/Wentai, other CAD/CAM design software.
4, high-speed drive stepper motor and drive, a double-Y-axis motor drive, high-speed operation up to 35m/min empty row over speed with cutting vigorously carved spindle speed can improve more.
The main application field of industry:
1, Woodworking: Three-dimensional wave plate processing, cupboard doors, wooden doors, wooden doors process, screens, process window processing, video game cabinets and panels, computer table and plate Auxiliary furniture products processing.
2, advertising industry: Advertising signs, logo production, acrylic cutting, forming system module, a variety of materials advertising the production of decorative products.
3, die industry: A sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, other industries: A variety of large-scale relief sculpture, video carving, widely used in process industries gifts.
Characteristics:
Woodworking series is the Super Star in the woodworking industry in the use of the large signs for a major production, the characters a high-speed cutting machines.
1, billboard industry: characters cutting, plate production, LED / neon channel, literal-hole cut, blister Lightbox mold production.
2, spindle running software control, automation strong.
3, speed, high efficiency, air speed-up to 8 m / min above.
4, spindle power, steel and good.
5, dual-motor drive, a unique dual-axis drive tooth strength of the large, smooth transmission, high-speed operation of the guarantee is not a long time deformation, jitter.
Best Sale CNC Machinery/CNC Wood Router
Best Sale CNC Machinery/CNC Wood Router
X Y with racks, all with round guides
NCSTUDIO system
Small Leadshine drive
Best Sale Machinery/CNC Wood Router
QL-1325 CNC wood furniture machine
Details:
1, imported straight round Guides , the loading capacity, a smooth operation, high accuracy and long life. Import high precision ball screw,high knife precision.
2, computer completely divorced from remote operation of USB interface DSP operating system, grip-type operation, operating more simple, more human design,unique intelligent budget rules, and give full play to electrical potential, high-speed processing, Qu Linear Synchronous , the perfect curve, not the computer memory and achieve cutting from the spindle automatic suspension.
3, software compatible with type3/Artcam/Castmate/Wentai,other CAD/CAM design software.
4, 6 vacuum adsorption surface area, can be effective against different sizes of plates adsorption. Vacuum pump can be selected imports of oil-free vacuum pump brands to solve cold weather, water cycle and water pump trouble for the issue.
5, high-speed drive stepper motor and drive, a double-Y-axis motor drive, the high-speed operation up to 35m/min empty row over the speed with cutting vigorously carved spindle speed can improve more.
Appliable Fields:
1. Woodworking: 3D wave plate, cupboard doors,furniture industry, decorative material,cabinet door,computer table, cabinets and panels,plastic fabrication,model,art crafts,musical instrument, plate.
2, advertising: large advertising signs,acrylic brands,tablets,calligraphy,3D characters cut,garden or wall decoration,logo, acrylic cut, billboard, plate production,LED/neon channel, literal-hole cut, Lightbox mold, stamp
3, die industry: a sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, others: large-scale relief sculpture, video carving,craft and gift, widely used in process industries gifts.
4>Configuration variable within reasonable limits according to clients' needs.
5>After sales service:(1) Free user friendly English VCD for machine using and maintaining .
(2) Hongye company provides free operation training service in Hongye factory.
Technical Data:
Working Area
1300mm*2500mm
Z Working Area
>120mm
Table Size
1440mm*3000mm
Max. Speed
8m/min
Max. Working Speed
6m/min
Working Delicacy
0.01mm
Repositioning Accuracy
0.05mm
Feeding Height
120mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
1500w
Working voltage
AC220V/50HZ
Spindle Power
2.2kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
X Y with racks, all with round guides
NCSTUDIO system
Small Leadshine drive
Best Sale Machinery/CNC Wood Router
QL-1325 CNC wood furniture machine
Details:
1, imported straight round Guides , the loading capacity, a smooth operation, high accuracy and long life. Import high precision ball screw,high knife precision.
2, computer completely divorced from remote operation of USB interface DSP operating system, grip-type operation, operating more simple, more human design,unique intelligent budget rules, and give full play to electrical potential, high-speed processing, Qu Linear Synchronous , the perfect curve, not the computer memory and achieve cutting from the spindle automatic suspension.
3, software compatible with type3/Artcam/Castmate/Wentai,other CAD/CAM design software.
4, 6 vacuum adsorption surface area, can be effective against different sizes of plates adsorption. Vacuum pump can be selected imports of oil-free vacuum pump brands to solve cold weather, water cycle and water pump trouble for the issue.
5, high-speed drive stepper motor and drive, a double-Y-axis motor drive, the high-speed operation up to 35m/min empty row over the speed with cutting vigorously carved spindle speed can improve more.
Appliable Fields:
1. Woodworking: 3D wave plate, cupboard doors,furniture industry, decorative material,cabinet door,computer table, cabinets and panels,plastic fabrication,model,art crafts,musical instrument, plate.
2, advertising: large advertising signs,acrylic brands,tablets,calligraphy,3D characters cut,garden or wall decoration,logo, acrylic cut, billboard, plate production,LED/neon channel, literal-hole cut, Lightbox mold, stamp
3, die industry: a sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, others: large-scale relief sculpture, video carving,craft and gift, widely used in process industries gifts.
4>Configuration variable within reasonable limits according to clients' needs.
5>After sales service:(1) Free user friendly English VCD for machine using and maintaining .
(2) Hongye company provides free operation training service in Hongye factory.
Technical Data:
Working Area
1300mm*2500mm
Z Working Area
>120mm
Table Size
1440mm*3000mm
Max. Speed
8m/min
Max. Working Speed
6m/min
Working Delicacy
0.01mm
Repositioning Accuracy
0.05mm
Feeding Height
120mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
1500w
Working voltage
AC220V/50HZ
Spindle Power
2.2kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
Best Selling SFSP Series Wood Hammer Mill
Wood Hammer Mill:
1.Convenient,Scientific inspection door
2.Pellet or belt feeder is optional
3.High capacity
Wood Hammer Mill
Features:
1. The shell is welded by steel plate,the site in the crush room which connect to the
meterials all use the wearable and commutative parts and double wear plate.
2. The motor and rotor are instelled in the same heavy-duty base,useing coupling direct
drive, the rotor are checked by dynamic balance,and can work forward and reverse,the
hammers are arranged symmetrically.
3. The second grinding designed for grinding chamber; the output can increase 15% and even
particle size.
4. Two kinds gap between beaters and sieve through changing position of beater are used
for coarse and fine grinding.
5. The smaller gap between beater and sieve can be used for grinding of coarse fiber or
fine materials.
Parameter:
model
SFSP80*60
SFSP80*60
Capacity(t/h)
1-4
2-5
Power(kw)
30/37
45/55
1.Convenient,Scientific inspection door
2.Pellet or belt feeder is optional
3.High capacity
Wood Hammer Mill
Features:
1. The shell is welded by steel plate,the site in the crush room which connect to the
meterials all use the wearable and commutative parts and double wear plate.
2. The motor and rotor are instelled in the same heavy-duty base,useing coupling direct
drive, the rotor are checked by dynamic balance,and can work forward and reverse,the
hammers are arranged symmetrically.
3. The second grinding designed for grinding chamber; the output can increase 15% and even
particle size.
4. Two kinds gap between beaters and sieve through changing position of beater are used
for coarse and fine grinding.
5. The smaller gap between beater and sieve can be used for grinding of coarse fiber or
fine materials.
Parameter:
model
SFSP80*60
SFSP80*60
Capacity(t/h)
1-4
2-5
Power(kw)
30/37
45/55
Best Wooden Pallet Block Machine SMS: 0086-15890650503
Best Wooden Pallet Block Machine
1. Used to make pallet block;
2. Good performance;
3. Long service life
Best Wooden Pallet Block Machine
1. Used to make pallet block;
2. Good performance;
3. Long service life
Emily, 0086-15890650503
Brief Introduction of Wood Shavings Sawdust Pallet Block Making/Forming Machine/Pallet Feet Making Line
1.
The production line is mainly
made up of
Crusher, Dryer, Gluing Machine, Press Machine and Saw
to cut the block piece by piece.
2.
The raw material is sawdust, wood shavings, waste wood, used pallet and so on
. If the raw material size is not very big we do not suggest crushing first.
3. The pallet block's size can be made by customer's demands. The end product is with a hole inside.
Main Parameter of Press Machine
Model
TYD-100(Single Heads)
TYF-150(Double Heads)
Specification of blocks
Height: 75-145mm Width: 75-145mm
Power
20.3Kw
13Kw
Glue water amount used
200-240kg/m3
100-120 kg/m3
Supports the density
550-600kg/ m3
Capacity
4m3/24h
2 m3/24h
Warm prosecution type
PID adjusts the merit accent to press the control
Voltage
380V 50Hz
Weight
1500kg
1000Kg
Dimension
5000*700*1300mm
5000*600*1300mm
Remarks: We can make the extruding moulds as your requirement, the max one is 145*145mm
Pictures of Machine:
Information about Final Block:
It conforms to the European Tray Association the load-bearing wooden block's manufacture instrument of ratification stipulation which is made by the wooden dregs board (the load-bearing wooden block specification 100mm*145mm diameter not to be able to surpass 32mm, the 145mm*145mm diameter not to be able to surpass 40mm). State Forestry Bureau East China lumber and wood ware quality surveillance test center check result:
Formaldehyde release quantity (mg/100g): 21.4 conform to E2
Grasps the bolt strength (N): 980
In bonding strength (Mpa):1.76
Pallet Block Usage:
The pallet block can be used for transportation, export packing and so on. International standard size is 90*90mm, 100*100, 90*100mm and so on. We can make the extruding mould as your requirements. Max size is 145*145mm, and generally the hole is 8%-10% of the whole area.
Contact Details:
1. Used to make pallet block;
2. Good performance;
3. Long service life
Best Wooden Pallet Block Machine
1. Used to make pallet block;
2. Good performance;
3. Long service life
Emily, 0086-15890650503
Brief Introduction of Wood Shavings Sawdust Pallet Block Making/Forming Machine/Pallet Feet Making Line
1.
The production line is mainly
made up of
Crusher, Dryer, Gluing Machine, Press Machine and Saw
to cut the block piece by piece.
2.
The raw material is sawdust, wood shavings, waste wood, used pallet and so on
. If the raw material size is not very big we do not suggest crushing first.
3. The pallet block's size can be made by customer's demands. The end product is with a hole inside.
Main Parameter of Press Machine
Model
TYD-100(Single Heads)
TYF-150(Double Heads)
Specification of blocks
Height: 75-145mm Width: 75-145mm
Power
20.3Kw
13Kw
Glue water amount used
200-240kg/m3
100-120 kg/m3
Supports the density
550-600kg/ m3
Capacity
4m3/24h
2 m3/24h
Warm prosecution type
PID adjusts the merit accent to press the control
Voltage
380V 50Hz
Weight
1500kg
1000Kg
Dimension
5000*700*1300mm
5000*600*1300mm
Remarks: We can make the extruding moulds as your requirement, the max one is 145*145mm
Pictures of Machine:
Information about Final Block:
It conforms to the European Tray Association the load-bearing wooden block's manufacture instrument of ratification stipulation which is made by the wooden dregs board (the load-bearing wooden block specification 100mm*145mm diameter not to be able to surpass 32mm, the 145mm*145mm diameter not to be able to surpass 40mm). State Forestry Bureau East China lumber and wood ware quality surveillance test center check result:
Formaldehyde release quantity (mg/100g): 21.4 conform to E2
Grasps the bolt strength (N): 980
In bonding strength (Mpa):1.76
Pallet Block Usage:
The pallet block can be used for transportation, export packing and so on. International standard size is 90*90mm, 100*100, 90*100mm and so on. We can make the extruding mould as your requirements. Max size is 145*145mm, and generally the hole is 8%-10% of the whole area.
Contact Details:
Best seller--wood briquette machine-Hot!!!
Best seller--wood briquette machine-Hot!!!
1.stable production
2.High automation
3.shape,length,diameter can adjust
Best seller--wood briquette machine-Hot!!!
1.Flowchart
2.Introduction of wood briquette machine
Briquettes are made by grinding Biomass and sawdust into a homogeneous pulp and forming this into a briquette under very high pressure. High pressure & pressing releases one of the natural components of wood - lignin which has the property of becoming liquid at high pressure (temperature) and, as it subsequently cools, it binds the wood together in its new form Briquettes.
3.raw material
Any types of Agro-forestry waste and forest waste can be used for make briquettes,Such as maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse , wood chips, rice husk, coffee husk, coir pith, jute sticks, groundnut shells, Bamboo, wood, straw dust, Mustard stalk and cotton stalks ,nutshell, coconut shell ,etc.
4.finish product of the machine
This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.
The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge
The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on
The available length could be :20cm,30cm, 40cm, 50cm
The feature of the final product : Specific gravity: 1300—1900kg/m Calorific value: 4500—5000kcal/kg.
5.
application:
Boilers : It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units, Food Processing Units, Oil Extraction Units, Solvent Extraction Plant and many other plants and industries..
Furnace & Foundries : It can be used for metal heating & melting (where melting point is less than 1000d/cel.)
Brick Kilns : It is the total, substitute of steam coal.
Residential & Commercial Heating : For winter heating in Cold areas and Hotels, Canteens,and so on.
6.Technical Data
Model
Capacity
Power (kw)
Dimensions,
mm
Bar Diameter, mm
Weight, MT
ZBJ9-1
180-220kg/h
11kw /20HP
1750*1250*680
45,50,55
0.5
ZBJ9-2
250-320kg/h
15KW/25HP
1750*1250*680
60,70,80
0.6
ZBJ9-3
320-400kg/h
22kw /30HP
1950*1350*950
80
0.95
ZBJ9-4
1000-1200kg/h
15*5+3+3+0.5
6000*2350*5000
50.60.65.70
3.8
ZBJ9-5
1500-2000kg/h
15*10+3*2+3+1
6000*3350*5000
50,60,70,80
7.5
ZBJ9-1-1
1750*1250*680
50,60
200-250
8-12%
15
USD2550ZBJ9-2
1750*1250*680
60,70,80
180-280
8-12%
18.5-22
USD2650ZBJ9-80
2000*1480*950
80
240-320
8-12%
18
USD3250ZBJ9-5-1
6000*2300*5000
50.60.70
800-1000
8-12%
11*5+3*2
USD14600ZBJ9-5-2
6000*2350*5000
50,60,70
1000-1200
8-12
15*5+3*2
USD15800Discount: send one set of propeller, 3set of coil heater for free
1.stable production
2.High automation
3.shape,length,diameter can adjust
Best seller--wood briquette machine-Hot!!!
1.Flowchart
2.Introduction of wood briquette machine
Briquettes are made by grinding Biomass and sawdust into a homogeneous pulp and forming this into a briquette under very high pressure. High pressure & pressing releases one of the natural components of wood - lignin which has the property of becoming liquid at high pressure (temperature) and, as it subsequently cools, it binds the wood together in its new form Briquettes.
3.raw material
Any types of Agro-forestry waste and forest waste can be used for make briquettes,Such as maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse , wood chips, rice husk, coffee husk, coir pith, jute sticks, groundnut shells, Bamboo, wood, straw dust, Mustard stalk and cotton stalks ,nutshell, coconut shell ,etc.
4.finish product of the machine
This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder or hollow hexagonal with a 15-20mm hole through the body.
The available shape: square, hexagonal, pentagon, pentagon with edge, hexagon with edge
The available diameter could be: 50mm,55mm.60mm,65mm.70mm.80mm and so on
The available length could be :20cm,30cm, 40cm, 50cm
The feature of the final product : Specific gravity: 1300—1900kg/m Calorific value: 4500—5000kcal/kg.
5.
application:
Boilers : It can be used in the boilers of Paper Mills, Sugar Mills, Dyeing houses, leather, lamination industries, Vanaspati units, Food Processing Units, Oil Extraction Units, Solvent Extraction Plant and many other plants and industries..
Furnace & Foundries : It can be used for metal heating & melting (where melting point is less than 1000d/cel.)
Brick Kilns : It is the total, substitute of steam coal.
Residential & Commercial Heating : For winter heating in Cold areas and Hotels, Canteens,and so on.
6.Technical Data
Model
Capacity
Power (kw)
Dimensions,
mm
Bar Diameter, mm
Weight, MT
ZBJ9-1
180-220kg/h
11kw /20HP
1750*1250*680
45,50,55
0.5
ZBJ9-2
250-320kg/h
15KW/25HP
1750*1250*680
60,70,80
0.6
ZBJ9-3
320-400kg/h
22kw /30HP
1950*1350*950
80
0.95
ZBJ9-4
1000-1200kg/h
15*5+3+3+0.5
6000*2350*5000
50.60.65.70
3.8
ZBJ9-5
1500-2000kg/h
15*10+3*2+3+1
6000*3350*5000
50,60,70,80
7.5
ZBJ9-1-1
1750*1250*680
50,60
200-250
8-12%
15
USD2550ZBJ9-2
1750*1250*680
60,70,80
180-280
8-12%
18.5-22
USD2650ZBJ9-80
2000*1480*950
80
240-320
8-12%
18
USD3250ZBJ9-5-1
6000*2300*5000
50.60.70
800-1000
8-12%
11*5+3*2
USD14600ZBJ9-5-2
6000*2350*5000
50,60,70
1000-1200
8-12
15*5+3*2
USD15800Discount: send one set of propeller, 3set of coil heater for free
Best seller-wood chipping machine
wood chippers are specially designed for round logs, square blocks, wood staff into 10-30mm size small wood pieces.
Introduction of
Disk Timber Chipping Machine
:
Screw plate-shaped chipping machine can cut log and small-diameter log with less than 200mm diameter and is applicable to paper pulp factory, forest tree factory, paper mill, thermal power plant, etc.
Timber Chipping machine
is mainly composed of four parts such as principal machine, coupling, bottom frame and motor, etc, in which the principal machine of chipping machine is composed of cutter head, upper and lower covers, feed inlet and outlet, etc.
Timber Chiping Machine
Specifications of Disk Timber Chipping Machine
Mobel of machine
2L×640
2L×1000
Diameter of cutter head(mm)
640
1000
Rotary speed of cutter head(r/min)
970
740
Quantity(sheet) of fly cutter
6
6
Length of wood chip,thickness(mm)
15-35 2-3
15-35 3-7
Mode of feeding
Declination
Declination
Dimension of feeding opening(mm)
150×140
250×250
Productive Capacity (t/h)
3-5
5-8
Power of electric motor(kw)
37
75
Maximum diameter of cutting wood(mm)
100
200
Mode of discharging
Up
Up
Weight of complete machine (kg)
1192
3375
External dimension (length×width×height)
2002×1175×1360
2820×1838×1892
Notice: Any change of Timber Chipping Machine technical data shall not be advised additionally.
The final product from this two machine (Disk Timber Chipping Machine or Drum Chipping Machine) .
Introduction of
Disk Timber Chipping Machine
:
Screw plate-shaped chipping machine can cut log and small-diameter log with less than 200mm diameter and is applicable to paper pulp factory, forest tree factory, paper mill, thermal power plant, etc.
Timber Chipping machine
is mainly composed of four parts such as principal machine, coupling, bottom frame and motor, etc, in which the principal machine of chipping machine is composed of cutter head, upper and lower covers, feed inlet and outlet, etc.
Timber Chiping Machine
Specifications of Disk Timber Chipping Machine
Mobel of machine
2L×640
2L×1000
Diameter of cutter head(mm)
640
1000
Rotary speed of cutter head(r/min)
970
740
Quantity(sheet) of fly cutter
6
6
Length of wood chip,thickness(mm)
15-35 2-3
15-35 3-7
Mode of feeding
Declination
Declination
Dimension of feeding opening(mm)
150×140
250×250
Productive Capacity (t/h)
3-5
5-8
Power of electric motor(kw)
37
75
Maximum diameter of cutting wood(mm)
100
200
Mode of discharging
Up
Up
Weight of complete machine (kg)
1192
3375
External dimension (length×width×height)
2002×1175×1360
2820×1838×1892
Notice: Any change of Timber Chipping Machine technical data shall not be advised additionally.
The final product from this two machine (Disk Timber Chipping Machine or Drum Chipping Machine) .
Best-selling 3TPH biomass wood pellet mill
Best-selling 3TPH biomass wood pellet mill:
1.Capacity is avaiable from 1T/H to 3T/H.
2. Competitive price.
3.Comprehensive
Best-selling 3TPH biomass wood pellet mill is the process of making waste materials into solid fuel. The objects are used for burning purposes. Biomass Pellet can be made from any type of Agro-Forestry waste.
It is mainly used to compress crushed
corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice husk, forestry waste, wood chips, chemical waste
etc.
Features
:
1. It is widely used in pelleting wood, straw and rice hull and other biomass sources.
2. Use more thin oil out of pellet mill to cool down lubrication device, lubricate main bearings forcibly.
3. The imported key elements are of high performance with long life and low maintenance cost produced by international advanced processing technology.
4. Use overload protective device and stroke switch to ensure safe operation.
5. Cutter mechanism is made of all stainless steel with scale to be very strong and malleable.
6. Continuous and stable work with very low noise and no-dust workshop.
Main Parameters:
Name
Capacity(T/H)
Power(KW)
Pellet Size
YZL 320
0.2-0.5
37
φ6-8mm
YZL 350
0.5-0.8
55
φ6-8mm
YZL 400
0.8-1
75/90
φ6-8mm
YZL 420
1-1.5
110
φ6-8mm
YZL 508
1.5-2
132
φ6-8mm
YZL 600
2-2.6/2.1-3
185/200
φ6-10mm
Customer Service 24hours Hot Jessica: +86-15190513782
:
1.Capacity is avaiable from 1T/H to 3T/H.
2. Competitive price.
3.Comprehensive
Best-selling 3TPH biomass wood pellet mill is the process of making waste materials into solid fuel. The objects are used for burning purposes. Biomass Pellet can be made from any type of Agro-Forestry waste.
It is mainly used to compress crushed
corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice husk, forestry waste, wood chips, chemical waste
etc.
Features
:
1. It is widely used in pelleting wood, straw and rice hull and other biomass sources.
2. Use more thin oil out of pellet mill to cool down lubrication device, lubricate main bearings forcibly.
3. The imported key elements are of high performance with long life and low maintenance cost produced by international advanced processing technology.
4. Use overload protective device and stroke switch to ensure safe operation.
5. Cutter mechanism is made of all stainless steel with scale to be very strong and malleable.
6. Continuous and stable work with very low noise and no-dust workshop.
Main Parameters:
Name
Capacity(T/H)
Power(KW)
Pellet Size
YZL 320
0.2-0.5
37
φ6-8mm
YZL 350
0.5-0.8
55
φ6-8mm
YZL 400
0.8-1
75/90
φ6-8mm
YZL 420
1-1.5
110
φ6-8mm
YZL 508
1.5-2
132
φ6-8mm
YZL 600
2-2.6/2.1-3
185/200
φ6-10mm
Customer Service 24hours Hot Jessica: +86-15190513782
:
Best-selling wooden furniture cnc engraver
Best-selling wooden furniture cnc engraver
1,working area:1350*1500*100mm
2,table size:1400*1600mm
3,drive:servo motor
Best-selling wooden furniture cnc engraver
Applicable Industries:
Classical mahogany furniture, European-style furniture, Antique ancient crafts, Buddhist statue, Buddhist statue niche,
Gift box, Bamboo crafts, Tile carving, Marble relief, Relief art label, Copper and aluminium relief crafts,
Hairpin, Frame, Craftworks, etc.
Technical parameters:
Parameters
A12
A15
A18
Working Area
X axis
1350mm
1350mm
1350mm
Y axis
1200mm
1500mm
1800mm
Z axis
100mm
100mm
100mm
Table size
1400×1300mm
1400×1600mm
1400×1900mm
Weight
1000kg
1200kg
1500kg
Spindle
1500W
1500W
1500W
Speed
15m/min
Driver
servo motor
1,working area:1350*1500*100mm
2,table size:1400*1600mm
3,drive:servo motor
Best-selling wooden furniture cnc engraver
Applicable Industries:
Classical mahogany furniture, European-style furniture, Antique ancient crafts, Buddhist statue, Buddhist statue niche,
Gift box, Bamboo crafts, Tile carving, Marble relief, Relief art label, Copper and aluminium relief crafts,
Hairpin, Frame, Craftworks, etc.
Technical parameters:
Parameters
A12
A15
A18
Working Area
X axis
1350mm
1350mm
1350mm
Y axis
1200mm
1500mm
1800mm
Z axis
100mm
100mm
100mm
Table size
1400×1300mm
1400×1600mm
1400×1900mm
Weight
1000kg
1200kg
1500kg
Spindle
1500W
1500W
1500W
Speed
15m/min
Driver
servo motor
Better-6090 CNC Router Machine
Better-6090 CNC Router Machine
1.Z travel up to 300mm
2.Mist Sprayer & flume
3.2.2kw water-cooled spindle
4.CE ISO9001
Better-6090 CNC Router Machine
1.Parameter:
Model
XJ-3030
XJ-3636
XJ-6090
X-axis travel(mm)
300mm
360mm
600mm
Y-axis travel(mm)
300mm
360mm
900mm
Z-axis travel(mm)
70mm
80mm
90mm
Motion positioning accuracy
±0.02/300mm
Repositioning accuracy
±0.04mm
Table Structure
Aluminum Section & high-density PVC
Max motion speed
25.000mm/min
Max working speed
9,000mm/min
Spindle power (kw)
1.5kw-3kw for optional
Drive type
Micro-step Stepper motor
Command
G-code
Power
AC220/50HZ
Drive
Leadshine542
Accessories:
Spanner×1, Brush×1, water pump×1, Power cord×1, cutter×3, software×1, manual and maintain card×1
Packing: 1500×1200×1300mm
Gross weight: 250kg
OPTIONAL:
* 2.2KW SPINDLE
* DSP OFF-LINE CONTROL(DSP MEMORY IS 128M)
* DUST COLLECTING SYSTEM
* ROTARY DEVICE (dia.80,100,200mm for option )
* FLUME
Applicable to:
Advertising signs, Logos and Brands, Acrylic Letters, part productions, Signs
, Tablets Calligraphy, architecture model, embossment, Home and Business Decorations
, Gardening decorations Wall decorations
Samples:
Feature:
*
Solid ganty, well structure of lathe bed, fast speed and high accuracy.
1.Z travel up to 300mm
2.Mist Sprayer & flume
3.2.2kw water-cooled spindle
4.CE ISO9001
Better-6090 CNC Router Machine
1.Parameter:
Model
XJ-3030
XJ-3636
XJ-6090
X-axis travel(mm)
300mm
360mm
600mm
Y-axis travel(mm)
300mm
360mm
900mm
Z-axis travel(mm)
70mm
80mm
90mm
Motion positioning accuracy
±0.02/300mm
Repositioning accuracy
±0.04mm
Table Structure
Aluminum Section & high-density PVC
Max motion speed
25.000mm/min
Max working speed
9,000mm/min
Spindle power (kw)
1.5kw-3kw for optional
Drive type
Micro-step Stepper motor
Command
G-code
Power
AC220/50HZ
Drive
Leadshine542
Accessories:
Spanner×1, Brush×1, water pump×1, Power cord×1, cutter×3, software×1, manual and maintain card×1
Packing: 1500×1200×1300mm
Gross weight: 250kg
OPTIONAL:
* 2.2KW SPINDLE
* DSP OFF-LINE CONTROL(DSP MEMORY IS 128M)
* DUST COLLECTING SYSTEM
* ROTARY DEVICE (dia.80,100,200mm for option )
* FLUME
Applicable to:
Advertising signs, Logos and Brands, Acrylic Letters, part productions, Signs
, Tablets Calligraphy, architecture model, embossment, Home and Business Decorations
, Gardening decorations Wall decorations
Samples:
Feature:
*
Solid ganty, well structure of lathe bed, fast speed and high accuracy.
1350A Film Slitting And Rewinding Machine In Woodworking
Slitting and rewinding machine is suitable for the cutting process of all kinds of thin film or PVC and decorative papers
Slitting and rewinding machine in woodworking
It Is designed for slitting rolls of PVC,edge banding , laminate films, decorative papers and other materials. It comes standard with air expender on the unwind and wind for rolls holding. This feature helps you wind your rolls straight. It can be operational in just minutes. The use of quality air expender on the rewind with the same outside diameter is important.but we also can design the machine with different outside diameter of the air expender on the rewind.
Film slitting machine
Technical specification:
1> Max Process Width: 650-1300mm
2> Max Material Diameter: 500mm
3> Material Rolling Speed: 2-60m/min(non grade)
4> Cutting Thickness: 0.1-1mm
5> Material Rolling Motor Power: 3.8kw
6> Dimension: 21000*1300*1100mm
7> Weight: 1500kg
8> Max Shares Each Time: 60 shares
Slitting and rewinding machine in woodworking
It Is designed for slitting rolls of PVC,edge banding , laminate films, decorative papers and other materials. It comes standard with air expender on the unwind and wind for rolls holding. This feature helps you wind your rolls straight. It can be operational in just minutes. The use of quality air expender on the rewind with the same outside diameter is important.but we also can design the machine with different outside diameter of the air expender on the rewind.
Film slitting machine
Technical specification:
1> Max Process Width: 650-1300mm
2> Max Material Diameter: 500mm
3> Material Rolling Speed: 2-60m/min(non grade)
4> Cutting Thickness: 0.1-1mm
5> Material Rolling Motor Power: 3.8kw
6> Dimension: 21000*1300*1100mm
7> Weight: 1500kg
8> Max Shares Each Time: 60 shares
Big Size Woodworking cnc router (working size5' *10' *0.7')
woodworking cnc router
1 Widely applied for woodworking
2 Thicken square pipe structure
3 Top performance
4 CE autorized
1530 Woodworking Cnc router
Advantages:
1)OMNI1530 is suitable for hard wood working, Big size and mass producing, like cutting and engraving on Rosewood for funiture, indoor decoration.
2)Best quality parts being used,such as: Italian HSD air cooling spindle, China top quality water cooling spindle, Delta inverter, Germany Becker vacuum pump, Hiwin rail linear bearings and bakelite for the vacuum table.
Specifications:
XYZ working area
1500*3000*200mm/5' *10' *0.7'
Spindle
3kw/4.5kw watercooling spindle
Motor
stepper
Table surface
T-slot Extrusion
Frame
Steel Square Tubes
X Y structure
rack and pinion drive/hiwin rail linear bearing
Working voltage
AC380/50Hz/ AC220/3phase
Control system
DSP control system
Optional Parts:
German Becker Oil vacuum pump KVT3.140
Oil vacuum pump 5kw 140m3/hr, 100mbar
Watercooling vacuum pump 5.5kw
Dust collector 2.2KW
Dust collector 3KW
Dust collector 5.5KW
Mist cooling system for metal material
3D Rotating Device
Spare parts(for free):
Cutting tools..........15pcs
Collet....................4pcs
Clamp.........................8pcs
Water-cooling Pump...1set
Spanner......................2pcs
Brush..........................1pc
Power Cord.................1pc
USB Cable...................1pc
1 Widely applied for woodworking
2 Thicken square pipe structure
3 Top performance
4 CE autorized
1530 Woodworking Cnc router
Advantages:
1)OMNI1530 is suitable for hard wood working, Big size and mass producing, like cutting and engraving on Rosewood for funiture, indoor decoration.
2)Best quality parts being used,such as: Italian HSD air cooling spindle, China top quality water cooling spindle, Delta inverter, Germany Becker vacuum pump, Hiwin rail linear bearings and bakelite for the vacuum table.
Specifications:
XYZ working area
1500*3000*200mm/5' *10' *0.7'
Spindle
3kw/4.5kw watercooling spindle
Motor
stepper
Table surface
T-slot Extrusion
Frame
Steel Square Tubes
X Y structure
rack and pinion drive/hiwin rail linear bearing
Working voltage
AC380/50Hz/ AC220/3phase
Control system
DSP control system
Optional Parts:
German Becker Oil vacuum pump KVT3.140
Oil vacuum pump 5kw 140m3/hr, 100mbar
Watercooling vacuum pump 5.5kw
Dust collector 2.2KW
Dust collector 3KW
Dust collector 5.5KW
Mist cooling system for metal material
3D Rotating Device
Spare parts(for free):
Cutting tools..........15pcs
Collet....................4pcs
Clamp.........................8pcs
Water-cooling Pump...1set
Spanner......................2pcs
Brush..........................1pc
Power Cord.................1pc
USB Cable...................1pc
Big Size CNC router VS2030A
CNC router VR2030A
1 Advanced structure
2 Intensive steel body
3 Cabinet-structure gantry
4Y axis is driven by 2 motor
We are a professional manufacturer of CNC machine. For over one decade, thousands of victor CNC Routers have been installed around the world. We supply a wide variety of machines for your industry to choose, such as CNC router for sign making, woodworking machine, stone making machine, laser engraver, laser cutting machine and so on. No matter cabinetmaking, furniture production, woodworking, metalworking, sign making, or marine construction, solid surface and plastics fabrication, you always find the right machine from here. You can find our machines is a reliable and indispensable addition to your company.
Instruction:
All-steel frame, steel pipe with 10mm in thickness, advanced frame designs, stable running, wear well.
Driven by double Y axis motor, gantry with good performance against pressure, ametabolic.
Adopting the high-power imported Italy spindle, low malfunction rate, high strength.
Product Description
VS1326A
Table size
1500×3200
Max working size
1300×2500
Z travel height
220
Table
Vacuum table
Max travel speed
30000
Power supply
380
Motor
Stepper motor
Spindle speed
18000
Spindle power
5.6KW Italy Elte
Tool diameter
3.175-12.7
Controller
53C
Software
type3
Format
G code HPGL
Transmission way
Rack & Pinion
Resetting positioning accuracy
0.01
Weight
1600
Figure Size
3200×1950×1650
1 Advanced structure
2 Intensive steel body
3 Cabinet-structure gantry
4Y axis is driven by 2 motor
We are a professional manufacturer of CNC machine. For over one decade, thousands of victor CNC Routers have been installed around the world. We supply a wide variety of machines for your industry to choose, such as CNC router for sign making, woodworking machine, stone making machine, laser engraver, laser cutting machine and so on. No matter cabinetmaking, furniture production, woodworking, metalworking, sign making, or marine construction, solid surface and plastics fabrication, you always find the right machine from here. You can find our machines is a reliable and indispensable addition to your company.
Instruction:
All-steel frame, steel pipe with 10mm in thickness, advanced frame designs, stable running, wear well.
Driven by double Y axis motor, gantry with good performance against pressure, ametabolic.
Adopting the high-power imported Italy spindle, low malfunction rate, high strength.
Product Description
VS1326A
Table size
1500×3200
Max working size
1300×2500
Z travel height
220
Table
Vacuum table
Max travel speed
30000
Power supply
380
Motor
Stepper motor
Spindle speed
18000
Spindle power
5.6KW Italy Elte
Tool diameter
3.175-12.7
Controller
53C
Software
type3
Format
G code HPGL
Transmission way
Rack & Pinion
Resetting positioning accuracy
0.01
Weight
1600
Figure Size
3200×1950×1650
Big Size Wood CNC Router with CE (2030 cnc router)/cnc machine
Big Size Wood CNC Router with CE/cnc machine
The voltage can be changed with transducer
Section bar vacuum table
Big Size Wood CNC Router with CE/cnc machine
QL-2030 MDF woodworking cnc router
Characteristics:
Woodworking series is the Super Star in the woodworking industry in the use of the large signs for a major production, the characters a high-speed cutting machines.
1, billboard industry: characters cutting, plate production, LED / neon channel, literal-hole cut, blister Lightbox mold production.
2, spindle running software control, automation strong.
3, speed, high efficiency, air speed-up to 8 m / min above.
4, spindle power, steel and good.
5, dual-motor drive, a unique dual-axis drive tooth strength of the large, smooth transmission, high-speed operation of the guarantee is not a long time deformation, jitter.
Perfoemance and parameter:
X Y Working Area
2000mm*3000mm
Z Working Area
>120mm
Table Size
2500mm*3500mm
Max. Speed
8m/min
Max. Working Speed
6m/min
Working Delicacy
0.01mm
Repositioning Accuracy
0.05mm
Feeding Height
120mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
1500w
Working voltage
AC220V/50HZ
Spindle Power
2.2kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
Appliable Fields:
1. Woodworking: 3D wave plate, cupboard doors,furniture industry, decorative material,cabinet door,computer table, cabinets and panels,plastic fabrication,model,art crafts,musical instrument, plate.
2, advertising: large advertising signs,acrylic brands,tablets,calligraphy,3D characters cut,garden or wall decoration,logo, acrylic cut, billboard, plate production,LED/neon channel, literal-hole cut, Lightbox mold, stamp
3, die industry: a sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, others: large-scale relief sculpture, video carving,craft and gift, widely used in process industries gifts.
4>Configuration variable within reasonable limits according to clients' needs.
5>After sales service:(1) Free user friendly English VCD for machine using and maintaining .
The voltage can be changed with transducer
Section bar vacuum table
Big Size Wood CNC Router with CE/cnc machine
QL-2030 MDF woodworking cnc router
Characteristics:
Woodworking series is the Super Star in the woodworking industry in the use of the large signs for a major production, the characters a high-speed cutting machines.
1, billboard industry: characters cutting, plate production, LED / neon channel, literal-hole cut, blister Lightbox mold production.
2, spindle running software control, automation strong.
3, speed, high efficiency, air speed-up to 8 m / min above.
4, spindle power, steel and good.
5, dual-motor drive, a unique dual-axis drive tooth strength of the large, smooth transmission, high-speed operation of the guarantee is not a long time deformation, jitter.
Perfoemance and parameter:
X Y Working Area
2000mm*3000mm
Z Working Area
>120mm
Table Size
2500mm*3500mm
Max. Speed
8m/min
Max. Working Speed
6m/min
Working Delicacy
0.01mm
Repositioning Accuracy
0.05mm
Feeding Height
120mm
Command Code
G Code*.u00*.mmg*.plt
Working Software
Windows98/2000/xp
Power (not including spindle)
1500w
Working voltage
AC220V/50HZ
Spindle Power
2.2kw
Spindle Running Speed
0-24000rpm
Motor
Stepper
Appliable Fields:
1. Woodworking: 3D wave plate, cupboard doors,furniture industry, decorative material,cabinet door,computer table, cabinets and panels,plastic fabrication,model,art crafts,musical instrument, plate.
2, advertising: large advertising signs,acrylic brands,tablets,calligraphy,3D characters cut,garden or wall decoration,logo, acrylic cut, billboard, plate production,LED/neon channel, literal-hole cut, Lightbox mold, stamp
3, die industry: a sculpture of copper, aluminum, iron and other metal molds, as well as artificial marble, sand, plastic sheeting, PVC pipe, wooden planks and other non-metallic mold.
4, others: large-scale relief sculpture, video carving,craft and gift, widely used in process industries gifts.
4>Configuration variable within reasonable limits according to clients' needs.
5>After sales service:(1) Free user friendly English VCD for machine using and maintaining .
Big Wood Chipper
big wood chipper
1.big wood chipper make30-50mm wood chips
2.input size:38*65cm
3.patent big wood chipper
4.CE,ISO,SGS
Big Wood Chipper
1. drum big wood chipper with CE.
2. shredding the wood log, branch or board.
3. several models and different capacitys.
Drum big wood chipper/wood shredder:
Brand-YULONG
Capacity: 2-10 ton per hour
The wood chippers are specially applied to round logs, square blocks, wood staff,wood pieces and big chips.
Operation easily, maintenance simple, life is long and the noisy is low.
They would be the best choices for dealing with wood scraps.
Technical Parameter of big wood chipper :
Model
BX15-80
BX45-190
BX215
BX216
BX218
BX2113
Power(kw)
30
45
45+2.2+1.5
55+3+1.5
110+5.5+1.5
220+5.5+3
Capacity(t/h)
0.8-1.5
2-3
3-4
5-7
12-15
15-22
Input Diameter
(cm)
15*15
18*18
16*40
23*54
34*70
45*70
Blade Number
3 flying knives
3 fixed knives
3 flying knives
3 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
Length of chips
(cm)
2-7
2-7
2-7
2-7
2-7
2-7
Zhangqiu Yulong Machine Co.,Ltd
Ms Mike Sun
Tel: 0086-531-8348 3997
Mobile:0086-13964044048
Fax: 0086-531-8348 3378
1.big wood chipper make30-50mm wood chips
2.input size:38*65cm
3.patent big wood chipper
4.CE,ISO,SGS
Big Wood Chipper
1. drum big wood chipper with CE.
2. shredding the wood log, branch or board.
3. several models and different capacitys.
Drum big wood chipper/wood shredder:
Brand-YULONG
Capacity: 2-10 ton per hour
The wood chippers are specially applied to round logs, square blocks, wood staff,wood pieces and big chips.
Operation easily, maintenance simple, life is long and the noisy is low.
They would be the best choices for dealing with wood scraps.
Technical Parameter of big wood chipper :
Model
BX15-80
BX45-190
BX215
BX216
BX218
BX2113
Power(kw)
30
45
45+2.2+1.5
55+3+1.5
110+5.5+1.5
220+5.5+3
Capacity(t/h)
0.8-1.5
2-3
3-4
5-7
12-15
15-22
Input Diameter
(cm)
15*15
18*18
16*40
23*54
34*70
45*70
Blade Number
3 flying knives
3 fixed knives
3 flying knives
3 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
2 flying knives
1 fixed knives
Length of chips
(cm)
2-7
2-7
2-7
2-7
2-7
2-7
Zhangqiu Yulong Machine Co.,Ltd
Ms Mike Sun
Tel: 0086-531-8348 3997
Mobile:0086-13964044048
Fax: 0086-531-8348 3378
Bioenergy SKJ series wood pellet machine
wood pellet machine
1: CE certificate
2. pellet size: 6mm-20mm
3: pellet length:20mm-50mm
4: warranty period for 5 years
wood pellet machine:
It's new generation of energy-saving products,researched and developed by our researcher newly. It is mainly used to compress crushed
corn straw,plant waste,bamboo poweder,grass,straw,rice husk and wood chips
etc.into cylindrical and square shape particles.
Machines adopt bipolar speed adjusting,and have the characterristics of low power consumption,reasonable structure,economic and durable.
The main electrical control system uses the international standard-delta starter,runningextremely stable.
Specification:
MODEL NO.
OUTPUT(KG/H)
POWER(KW)
PARTICLE SPECIFACATION(mm)
450
600-700
37
6-20
550
800-1000
45
6-25
800
1500-2000
90
6-30
1: CE certificate
2. pellet size: 6mm-20mm
3: pellet length:20mm-50mm
4: warranty period for 5 years
wood pellet machine:
It's new generation of energy-saving products,researched and developed by our researcher newly. It is mainly used to compress crushed
corn straw,plant waste,bamboo poweder,grass,straw,rice husk and wood chips
etc.into cylindrical and square shape particles.
Machines adopt bipolar speed adjusting,and have the characterristics of low power consumption,reasonable structure,economic and durable.
The main electrical control system uses the international standard-delta starter,runningextremely stable.
Specification:
MODEL NO.
OUTPUT(KG/H)
POWER(KW)
PARTICLE SPECIFACATION(mm)
450
600-700
37
6-20
550
800-1000
45
6-25
800
1500-2000
90
6-30
Bioenergy SKJ200 homeuse wood pellet machine
Pellet machine
1.CE certificate
2.pellet size :6-30mm
3.pellet length:20-50mm
4.warranty: 5 years
Details of pellet machine
The pellet machine mainly grinding crude fiberinto granulation. Such as sawdust, rice husk,cotton stalk,cotton seed skins,weeds and crop stalks and other plant waste , it can also be applied in making fertilizer,organic manure fertilizer,
Type no
Output
wood/feed
Power wood/feed
Outer DIMmm
Weight (kg)
Transmission type
SKJ200
120kg/250kg
11kw/7.5kw
1150*530*750
250
Gear-box
SKJ250
150kg/300kg
18kw/15kw
1250*600*850
300
Gear-box
SKJ300
250kg/400kg
22kw/18kw
1300*600*900
350
Gear-box
SKJ350
300-400kg/500kg
30kw/22kw
1300*850*1300
600
Gear-box
SKJ450
600kg/1000kg
45kw/45kw
1600*1400*800
800
Gear-box
SKJ550
1000kg/1500kg
55kw/55kw
1700*850*1600
1000
Gear -box
SKJ800
1500kg/2500kg
110kw
2000*1050*2050
4500
Gear-box
1.CE certificate
2.pellet size :6-30mm
3.pellet length:20-50mm
4.warranty: 5 years
Details of pellet machine
The pellet machine mainly grinding crude fiberinto granulation. Such as sawdust, rice husk,cotton stalk,cotton seed skins,weeds and crop stalks and other plant waste , it can also be applied in making fertilizer,organic manure fertilizer,
Type no
Output
wood/feed
Power wood/feed
Outer DIMmm
Weight (kg)
Transmission type
SKJ200
120kg/250kg
11kw/7.5kw
1150*530*750
250
Gear-box
SKJ250
150kg/300kg
18kw/15kw
1250*600*850
300
Gear-box
SKJ300
250kg/400kg
22kw/18kw
1300*600*900
350
Gear-box
SKJ350
300-400kg/500kg
30kw/22kw
1300*850*1300
600
Gear-box
SKJ450
600kg/1000kg
45kw/45kw
1600*1400*800
800
Gear-box
SKJ550
1000kg/1500kg
55kw/55kw
1700*850*1600
1000
Gear -box
SKJ800
1500kg/2500kg
110kw
2000*1050*2050
4500
Gear-box
Thursday, March 24, 2011
Biofuel Wood Sawdust Pellet Making Machine (CE Approved)
1. straw, sawdust, stalk pellet
2. rice husk, hard sawdust pellet
3. pellet length from 5mm to 50mm
4. CE&ISO9001 Certificate
We are
professional manufacturer
of pellet machine, hammer mill, wood chipper, wood crusher, wood/straw pellet production line. All of our machine has passed
CE&ISO9001
Certificate.
Biomass wood sawdust pellet mill, pellet making machine:
Introduction:
It is mainly used to compress crushed
corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice husk, forestry waste, wood chips, chemical waste and etc
.
into cylindrical shape particles. Raw material moisture is
10%~15%
before enter into pellet machine.The diameter of final size is 6mm, 8mm, 10mm, 12mm ect for the fuel pellet. The below is the final pellet picture as below:
SKJ Series wood sawdust pellets mill Specification:
Model No.
Output (kg/h)
Power (kw)
Pellet (mm)
Dynamic configuration
Packing size (m)
Weight (kg)
SKJ350
400-600
30
6-30
Gearbox
1.8*0.9* 1.6
900
SKJ450
600-800
37
6-30
Gearbox
1.65*0.9*1.4
1200
SKJ550
1000-1500
45
6-30
Gearbox
2.0*1.0*1.8
1600
SKJ800
1500-2000
90
6-30
Gearbox
2.4*1.2*2
4500
Pls contact me if any further questions.
Mob: 0086 150 6906 3929(Shirely Huang)
2. rice husk, hard sawdust pellet
3. pellet length from 5mm to 50mm
4. CE&ISO9001 Certificate
We are
professional manufacturer
of pellet machine, hammer mill, wood chipper, wood crusher, wood/straw pellet production line. All of our machine has passed
CE&ISO9001
Certificate.
Biomass wood sawdust pellet mill, pellet making machine:
Introduction:
It is mainly used to compress crushed
corn straw, sawdust, plant waste, bamboo powder, grass, sunflower stalk, straw, rice husk, forestry waste, wood chips, chemical waste and etc
.
into cylindrical shape particles. Raw material moisture is
10%~15%
before enter into pellet machine.The diameter of final size is 6mm, 8mm, 10mm, 12mm ect for the fuel pellet. The below is the final pellet picture as below:
SKJ Series wood sawdust pellets mill Specification:
Model No.
Output (kg/h)
Power (kw)
Pellet (mm)
Dynamic configuration
Packing size (m)
Weight (kg)
SKJ350
400-600
30
6-30
Gearbox
1.8*0.9* 1.6
900
SKJ450
600-800
37
6-30
Gearbox
1.65*0.9*1.4
1200
SKJ550
1000-1500
45
6-30
Gearbox
2.0*1.0*1.8
1600
SKJ800
1500-2000
90
6-30
Gearbox
2.4*1.2*2
4500
Pls contact me if any further questions.
Mob: 0086 150 6906 3929(Shirely Huang)
Biomass Briquette Making Machine BZBJ-II
1. High capacity
2. Lower consumption
3. Easy to Combustion
4. Good quality and best price
Biomass Briquette Making Machine
This Biomass Briquette Making Machine equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 7.5/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette (without carbonization/charring) can be used as fuel for briquette boilers or stoves for heating.
Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
Model
ZBJII
ZBJI
Output kg/h
200-250
130-150
Motor Power (kw)
18kw
7.5kw/15kw
Electric heater (kw)
2kw*3pcs
1.5kw*3pcs
Weight(kg)
900kg
650kg
Overall dimension
1860*800*1360mm
1650*600*1260
Size of finished products (mm)
Diameter: 70,80,90,100mm
Diameter:
40, 50,60mm
Thank you for your attention to our biomass briquette press!
2. Lower consumption
3. Easy to Combustion
4. Good quality and best price
Biomass Briquette Making Machine
This Biomass Briquette Making Machine equipped with automatic temperature control system are designed to produce high density wood briquette from biomass. The motor can be 7.5/18.5kw-3phase-380v-50hz electrical driven motor. This machine can be operated 16 hours per day. The extruded wood briquette (without carbonization/charring) can be used as fuel for briquette boilers or stoves for heating.
Please note: during briquetting process, there will be some smoke from the briquette machine that have to be expel to atmosphere.
Model
ZBJII
ZBJI
Output kg/h
200-250
130-150
Motor Power (kw)
18kw
7.5kw/15kw
Electric heater (kw)
2kw*3pcs
1.5kw*3pcs
Weight(kg)
900kg
650kg
Overall dimension
1860*800*1360mm
1650*600*1260
Size of finished products (mm)
Diameter: 70,80,90,100mm
Diameter:
40, 50,60mm
Thank you for your attention to our biomass briquette press!
Biomass Energy Wood Pellet Mill
Biomass Energy Wood Pellet Mill
1.The capacity of wood pellet mill is 200kg/h-3t/h
2.The key parts of made of alloy steel
Biomass Energy Wood Pellet Mill
Wood pellet mill is widely used in the granulation of wood, straw, other biomass sources.The capacity ranges of this type wood pellet mill is from 200kgs to 3T per hour.Driven with heavy- duty gearbox construction can produce continuously in most adverse condition. The imported key elements are of high performance with long life and low maintenance cost. The key parts are made of alloy steel to be very strong and malleable. complete biomass wood pellet mill is made of stainless steel.
GC-MZLH-Serier wood pellet mill with different color:
GC-MZLH-Serier wood pellet mill with ring die is the most important equipment during pelletizing process.Our wood pellet line includes feeder system, conditioner system, gear box system, ring die system and lubricate system. By the moveable screw of feeder, the dried material is transferred into the conditioner. The moisture content is the most important element to pelletize good quality pellet, so the conditioner is also very crucial to soften the raw material by water or steam.
Main Date of Ring Die Wood Pellet Mill
Model
MainMotor Power(kw)
Capacity(t/h)
Feeding Motor Power(kw)
Conditioner Motor Power(kw)
Diameter of Die (mm)
Diameter of Pellet(mm)
GC-MZLH25
7.5*2
0.2-0.3
0.75+0.55
2.2
250
4-8
GC-MZLH32
37
0.3-0.6
0.75+0.55
2.2
320
4-8
GC-MZLH35
55
0.5-0.8
0.75+0.75
2.2
350
4-8
GC-MZLH40
75
0.7-1.1
1.5+0.75
2.2
400
4-8
GC-MZLH42
110
1.0-1.5
1.5+0.75
5.5
420
4-8
GC-MZLH508
132/160
2.0-3.0
1.5+0.75
7.5
508
4-8
1.The capacity of wood pellet mill is 200kg/h-3t/h
2.The key parts of made of alloy steel
Biomass Energy Wood Pellet Mill
Wood pellet mill is widely used in the granulation of wood, straw, other biomass sources.The capacity ranges of this type wood pellet mill is from 200kgs to 3T per hour.Driven with heavy- duty gearbox construction can produce continuously in most adverse condition. The imported key elements are of high performance with long life and low maintenance cost. The key parts are made of alloy steel to be very strong and malleable. complete biomass wood pellet mill is made of stainless steel.
GC-MZLH-Serier wood pellet mill with different color:
GC-MZLH-Serier wood pellet mill with ring die is the most important equipment during pelletizing process.Our wood pellet line includes feeder system, conditioner system, gear box system, ring die system and lubricate system. By the moveable screw of feeder, the dried material is transferred into the conditioner. The moisture content is the most important element to pelletize good quality pellet, so the conditioner is also very crucial to soften the raw material by water or steam.
Main Date of Ring Die Wood Pellet Mill
Model
MainMotor Power(kw)
Capacity(t/h)
Feeding Motor Power(kw)
Conditioner Motor Power(kw)
Diameter of Die (mm)
Diameter of Pellet(mm)
GC-MZLH25
7.5*2
0.2-0.3
0.75+0.55
2.2
250
4-8
GC-MZLH32
37
0.3-0.6
0.75+0.55
2.2
320
4-8
GC-MZLH35
55
0.5-0.8
0.75+0.75
2.2
350
4-8
GC-MZLH40
75
0.7-1.1
1.5+0.75
2.2
400
4-8
GC-MZLH42
110
1.0-1.5
1.5+0.75
5.5
420
4-8
GC-MZLH508
132/160
2.0-3.0
1.5+0.75
7.5
508
4-8
Biomass Pellet Machine(CE SGS)
Biomass Pellet Machine
1.Vertical ring-die pellet machine
2.High efficiency,low power loss
3.Patent product
4.CE SGS ISO9001
Biomass Pellet Machine(CE SGS)
Introduction of biomass pellet machine:
1. Biomass pellet machine
is our main product which has adopted the essence of pellet mill in oversea market.
The heart parts “double layer die” has unique structural assembly and “rollers” are made of high wearable alloy materials. These two parts have the following characters: particular design, reasonable structure, low energy, high efficiency, long life and so on.
2
. Through many technical experts’ hard work, our company has developed this typical patent product,
biomass pellet machine
, which comes forth firstly in domestic market.
The new biomass pellet machine has filled the country blank in vertical feeding for ring die pellet machine and reached the international advanced level.
Application of biomass
pellet machine
:
1
.
Biomass pellet machine
is mainly applicable for difficult molding materials with low adhesion rate
, for example rice husk, sunflower husk, peanut shell and fruit shell; branch, stem, bark and other wood waste; a variety of crop stalks; rubber, cement, ash and other chemical materials.
2
. The
biomass pellet machine
can be used in feed mill, wood processing plants, fuel plants, fertilizer plants, chemical plants etc. Since it requires less investment and yield quicker result and that no risk,
the biomass pellet machine is an ideal dense compression molding equipment.
Technical parameter:
Model
Capacity(t/h)
Power(kw)
diameter(mm)
Weight(t)
Size(mm)
XGJ550
0.8-1.2
75
Φ4-12
6.04
2630×100×2400
XGJ560
1-1.5
90
Φ4-12
6.1
2600×1300×2300
XGJ580
1.5-2
160
Φ4-12
7
2900×1300×2400
XGJ850
2-3
220
Φ4-12
14.5
3300×1400×3100
XGJ880
3.5-4
315
Φ4-12
18
3800×1680×3400
1.Vertical ring-die pellet machine
2.High efficiency,low power loss
3.Patent product
4.CE SGS ISO9001
Biomass Pellet Machine(CE SGS)
Introduction of biomass pellet machine:
1. Biomass pellet machine
is our main product which has adopted the essence of pellet mill in oversea market.
The heart parts “double layer die” has unique structural assembly and “rollers” are made of high wearable alloy materials. These two parts have the following characters: particular design, reasonable structure, low energy, high efficiency, long life and so on.
2
. Through many technical experts’ hard work, our company has developed this typical patent product,
biomass pellet machine
, which comes forth firstly in domestic market.
The new biomass pellet machine has filled the country blank in vertical feeding for ring die pellet machine and reached the international advanced level.
Application of biomass
pellet machine
:
1
.
Biomass pellet machine
is mainly applicable for difficult molding materials with low adhesion rate
, for example rice husk, sunflower husk, peanut shell and fruit shell; branch, stem, bark and other wood waste; a variety of crop stalks; rubber, cement, ash and other chemical materials.
2
. The
biomass pellet machine
can be used in feed mill, wood processing plants, fuel plants, fertilizer plants, chemical plants etc. Since it requires less investment and yield quicker result and that no risk,
the biomass pellet machine is an ideal dense compression molding equipment.
Technical parameter:
Model
Capacity(t/h)
Power(kw)
diameter(mm)
Weight(t)
Size(mm)
XGJ550
0.8-1.2
75
Φ4-12
6.04
2630×100×2400
XGJ560
1-1.5
90
Φ4-12
6.1
2600×1300×2300
XGJ580
1.5-2
160
Φ4-12
7
2900×1300×2400
XGJ850
2-3
220
Φ4-12
14.5
3300×1400×3100
XGJ880
3.5-4
315
Φ4-12
18
3800×1680×3400
14 Layers' Hot Press for Plywood
Functions:Auto pressure control;automatic aftercompaction;auto lay-off timing;auto completion of hot press curve
Hot Press(14 Layers)
Type
BY214×8/400(14B)
Scope of Application
4×8 three-layer plywood and three-layer faceboard
Annual productivity
20000 cubic meters
Max working pressure
400 tons
Operate time
Less then 15 s.(adjustable)
Lay off time
Less then 13 s.(adjustable)
Installed capacity
20KW
Overall unit weight
37 tons
Electrical appliance
Controlled by OMRON PLC program
Functions
Auto pressure control automatic aftercompaction auto lay-off timing auto completion of hot press curve
Hot Press(14 Layers)
Type
BY214×8/400(14B)
Scope of Application
4×8 three-layer plywood and three-layer faceboard
Annual productivity
20000 cubic meters
Max working pressure
400 tons
Operate time
Less then 15 s.(adjustable)
Lay off time
Less then 13 s.(adjustable)
Installed capacity
20KW
Overall unit weight
37 tons
Electrical appliance
Controlled by OMRON PLC program
Functions
Auto pressure control automatic aftercompaction auto lay-off timing auto completion of hot press curve
Biomass pellet making machine
pellet making machine
1.CE pellet making machine
2.capacity 8~22t/h
3.make wood pellet or feed pellet
4.pellet 2~12mm
CE pellet making machine
Pellet making
machine
introduction
1.Apply for wood sawdust,wood waste,agricultural waste,etc.Making them to wood pellets or animal feed stuff.
2.Machine adopt geat-driving structure,makes the operation stable,lowers the conveying power consumption.
3.It’s output capacity is 15% higher than the belt-driving machine.
4.It adopts dual-shaft differential conditioner with specially designed blade structure and form,which processes the feed more evenly.
Pellet making
machine
Item
Spe.
Model
WDGRPM320
WDGRPM350
WDGRPM400
WDGRPM420
WDGPM508
WDGPM558
1.
Capacity(t/h)
2~7t/h
3~9t/h
3~12t/h
3~14t/h
5~22t/h
5~24t/h
2.
Main power(kw)
37kw
55kw
75kw
90kw
132kw
160kw
3.
Feed power(kw)
0.75kw
1.1kw
1.5kw
1.5kw
1.5kw
1.5kw
4.
Conditioner power(kw)
2.2kw
4kw
5.5kw
5.5kw
5.5kw
5.5kw
5.
Dia size(mm)
320mm
350mm
400mm
420mm
508mm
558mm
6.
Roll No.
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
7.
Dimension(m)
2.1*0.8*1.3m
2.2*0.9*1.5m
2.3*1*2.1m
3.2*1.1*1.7m
3.2*1.3*1.9m
3.5*1.5*2.8m
8.
Weight(t)
2.1t
2.5t
2.8t
3.1t
3.5t
4t
9.
Material
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
raw material
Machine apply for raw material like corn,whet,soyabean,rice or biomass material.
finished product
spare parts
jPellet making machine
line
We supply whole pellet production plant for wood or animal feed,contact Cyndy 0086-15039073502
1.CE pellet making machine
2.capacity 8~22t/h
3.make wood pellet or feed pellet
4.pellet 2~12mm
CE pellet making machine
Pellet making
machine
introduction
1.Apply for wood sawdust,wood waste,agricultural waste,etc.Making them to wood pellets or animal feed stuff.
2.Machine adopt geat-driving structure,makes the operation stable,lowers the conveying power consumption.
3.It’s output capacity is 15% higher than the belt-driving machine.
4.It adopts dual-shaft differential conditioner with specially designed blade structure and form,which processes the feed more evenly.
Pellet making
machine
Item
Spe.
Model
WDGRPM320
WDGRPM350
WDGRPM400
WDGRPM420
WDGPM508
WDGPM558
1.
Capacity(t/h)
2~7t/h
3~9t/h
3~12t/h
3~14t/h
5~22t/h
5~24t/h
2.
Main power(kw)
37kw
55kw
75kw
90kw
132kw
160kw
3.
Feed power(kw)
0.75kw
1.1kw
1.5kw
1.5kw
1.5kw
1.5kw
4.
Conditioner power(kw)
2.2kw
4kw
5.5kw
5.5kw
5.5kw
5.5kw
5.
Dia size(mm)
320mm
350mm
400mm
420mm
508mm
558mm
6.
Roll No.
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
7.
Dimension(m)
2.1*0.8*1.3m
2.2*0.9*1.5m
2.3*1*2.1m
3.2*1.1*1.7m
3.2*1.3*1.9m
3.5*1.5*2.8m
8.
Weight(t)
2.1t
2.5t
2.8t
3.1t
3.5t
4t
9.
Material
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Stainless steel
raw material
Machine apply for raw material like corn,whet,soyabean,rice or biomass material.
finished product
spare parts
jPellet making machine
line
We supply whole pellet production plant for wood or animal feed,contact Cyndy 0086-15039073502
Biomass pellet making machine
This Pellet making machine is characterized by high output,good performance,low energy consumption,low noise
This Pellet making machine is characterized by high output,good performance,low energy consumption,low noise.
Detailed Product Description
Biomass pellet making machineBiomass pellet making machine
1.Drive with gear box.
2. Stainless steel feeder with frequency converter.
3. Stainless steel conditioner with improved conditioning time.
4. Axial steam spraying device for adding saturated steam.
5. The bearings and seals at the main drive of international standards.
6. Lubrication of gearbox assured by reliable oil return.
7. sawdust pellet millThe gear box with high quality drive systems, low noise.
8. Quick die changing with clamping device
9.Feeder, conditioner and chute are made of stainless steel with long service life;
10.Feeder is with a variable speed controlled to meet different outputs requiremen
11.The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility
sawdust pellet mill
This Pellet making machine is characterized by high output,good performance,low energy consumption,low noise.
Detailed Product Description
Biomass pellet making machineBiomass pellet making machine
1.Drive with gear box.
2. Stainless steel feeder with frequency converter.
3. Stainless steel conditioner with improved conditioning time.
4. Axial steam spraying device for adding saturated steam.
5. The bearings and seals at the main drive of international standards.
6. Lubrication of gearbox assured by reliable oil return.
7. sawdust pellet millThe gear box with high quality drive systems, low noise.
8. Quick die changing with clamping device
9.Feeder, conditioner and chute are made of stainless steel with long service life;
10.Feeder is with a variable speed controlled to meet different outputs requiremen
11.The bearing and oil seal in the main drive are imported from Japan to ensure highly-efficient, stability, credibility
sawdust pellet mill
Subscribe to:
Posts (Atom)