Short Cycle Laminating Press

Short Cycle Laminating Press
1. Pressure control
2. Temperature recycling system.
3. Thermal oil or steam as heating medium
XXL Short Cycle Laminating Press is mainly appiled in the lamination of furniture decorative board and laminate flooring.We provide customers with various overlaying production lines according to their specirements.
End product size……………………….…….….……...(6~45)×3660×1830mm
End product size…………………………...…According to technical requirement
Total power…………………………………..……………..……………..~80kW
Heat assumption………………………….....……....…..0.60MW(50×10
4
kcal/h)
Compressed air consumption…….~0.8m
3
/min 0.6Mpa (User prepares air pump)
Total pressure………………………………………………….……….…25000kN
Specific pressure of work piece…………………………………….…....37kg/cm
2
Controlling mode…………………….…………….PLC + man-machine interface
Size of platen…..…………………………….…………..….…….3850×2000mm
Daylight opening………………………………….…….….….………..….300mm
Main cylinder (Diameter×Stroke)………………………..400×300mm 8 units
Lifting cylinder (Diameter×Stroke)…………………..…..160×300mm 2 units
Working oil pressure………………….………………………….……….≤28MPa
Hot platen temperature…………….…………….……………….…….….≤210°C
Heating medium…………...…..………..….………………………..…Thermal oil
Temp. control mode………….Temp. controller (Recycling control system included)
Feeding speed……..………………………………….. .40~90m/min (Adjustable)
Auxiliary cycle time (excluding Pressure-holding time)………………..…......18s
Blowing rate of dust catcher………………….……………..……....~10000m
3
/h
Overall dimension……..………………………………...53000×8650×5600mm