SLW1500C Veneer Peeler

SLW1500C veneer peeler
1.Fit for all kinds of woods
2.7.0mm thickness
3.Emerson transducer,Taiwan TaiDa PLC programmer
Model
Processing Dia
(mm)
Processing length
(mm)
Final Dia
(mm)
Speed
(m/min)
Veneer Thickness Range (mm)
SLW1500C
300
1400
28
35
0.4--4.0
weight
(kg)
Roller‘ Dia
(mm)
Power
(kw)
Outer Measure
(mm)
Knife fixation
3500
99
20.5
3000×1800×1100
Obverse fixation
Material
The straight log or remained log core from spindle veneer peeling lathe
Primary features
1.Equiped with US Emerson transducer ,Taiwan TaiDa PLC programmer ,Human Vs
Machine interface ,thinkness display , which ensures operation stability and outputting
even and level veneer ,smooth and level,the thickness of veneer can be
7.0mm at most.It is your best choice.
2.Fitting for miscellaneous wood, pine wood, eucalyptus wood, maple wood and so on.
3.The planeness of shavered veneer is controled not manually but by well programmed
curve,which is designed when the machine is manufactured.Whatever specification the
veneer is ,it sticks to the same planeness.
4.Moderate requirement to workers’ technology grade.
5.Lower slideway ensures the stable feeding and even veneer.
Brief introduction
the updated gear type spindleless veneer peeling lathe is driven by assembly of electric
motor and gear,it is more easier to regulate&repair since the absence of timing meter.
To realize varying feeding speed with pure mechanical method ,which avoid uneven
shaved veneer either caused by rotation inertia of out of round log in the case of both
timing motor and hydraulic spindleless veneer peeling lathe or caused by unstsble electric voltage.It is ensured that the shaved veneer thickness
is within 0.1mm error under normal situation.
SLW1500C wood machine