YX 1200 4X8 Short Cycle Hot Press Line

YX 1200 with auto feeding, cleaning, vacuum unloading and trimming etc. 1200pcs board per day. Using japanese or germany parts
1. Total pressure : 12000 KN
2. Diameter of cylinder and QTY: φ320mm QTY: 6 unit
3. Diameter of lift-cylinder and QTY : φ63mm QTY: 4 pieces
4. Size of heating plate system: 1400mm×2600mm
5. Max Operating: about 200mm
6. Motor: 22 KW+0.75KW
7. Capacity(22 hours a day) : 1200 pieces per day
8. PLC control system

1) Pallet Lifter
Fork clip loading the pallet board into lifter , the push star to push board one by one. It was control by photoelectricity switch.

2) Pusher & conveyor
Belt conveyor transfer the board into cleaner.

3) Cleaner
By using brush and vacuum to cleaning the dust of the board surface.

4) Board Transfer System
It will pick up the clean board on the top of paper

5) Paper Stock Frame
Stock the roll paper

6) Belt Feeding Table
Belt feeding table will feeding the board with paper automatically. The belt design for high temperature as well.

7) Main Press
By using additional thicker parts to promote the strength of body. Extend the lift time.

8) Vacuum Unloading System
Easy way to unloading the finish products, less damage as well. It was brand air cylinder.

9) Conveyor for trimming and checking
When the board passing this position, it will auto trimming the left and right side. Then the trimming system will trim the rest two sides. After finish it, the cylinder will pick up the board and to check the bottom side of finish products.

10) Stock lifter with two position(option)
We supply two position of stock pallet A&B.