2-3ton/h big pellet making machine (CE,ISO9001)

1.pellet making machine:2-3t/h
2.make pellet:2-8mm
3.auto-lubricate oil,auto adjust pressure
4.220+2.2+0.55kw
5.CE,ISO9001
1centrifugal big pellet making machine adopts Germanic high technic, pressing high crude fiber biomass waste into good pellets. which is specially fit for biomass sawdust ,wheat straw, rice straw, rice husk , Coconut shell, palm fiber and palm shell , hard wood ect . besides, it is also fit for fertilizer materials poultry manure , plant waste ect. pellet diameter :2-8mm.length can be adjusted .


2centrifugal big pellet making machine
adopts both common ring die pellet making machine and flat die pellet making machine advantages ,produce much larger pressure between rollers and die , which can press very low adhersion biomass waste into good quality pellets . it can adjust pressure automatically , when adjust to a fit date, the pressure will be stable and not loose. no need to adjust again. very easy to adjust



3.By customes full pellet production line trail experiment , we have big confidence that centrifugal big pellet making machine good working efficiency , its large pressure can be adjusted automatically to fit for different materials pressure ratio , also it contains full automatical lubricate oil system , which can lubricate spare parts-- rollers, shaft ,gears, bearings automatically each two months , no need to add any oil within two months , but other common supplier pellet making machines needs to add oil each four hours, very hard to operate.




4.Centrifugal sawdust pellet press adopts flat die pellet press vertical feeding materials advantage , which can feed materials vertically directly and fastly into pelletizing room , but common ring die pellet making machine only can feed materials from machine side , the feeding type is very slow and not even.


5.Centrifugal big pellet making machine has one ring die with two--layers inside --top layer and bottom layer .rollers are horizontal type

, when it works , rollers will move ,toughing with ring die bottom layer in a flat level , ring die stable . in this way ,by rollers moving , the top layer die will rebound the splashed materials into bottom pressing room , increase capacity ,making pressing pellet process going on evenly .


6.Centrifugal big pelelt making machine ring die has two layers , when it works, only bottom layer working , so when bottom layer is broken , turn over it and making top layer to bottom, then it can work again . one die can use two times .also the top and bottom layer hole can be different , one die can press two different diameter pellets . in China, no other supplier can reach our technic.


7.Centrifugal big pellet making machine works connecting with air fan and dust filter , which can clean dust during pelletizing process and cool spare parts heat when pressing pellets, on the other hand, it can cool pellet mill inner spare parts hot temprature , increasing spare parts life .


Model
Power (kw)
Capacity (kg/h)
Weight (ton)
XGJ450
55
0.6-1
4.5
XGJ550
75
0.8-1.5
6.04
XGJ560
90
1.2-1.8
6.7
XGJ580
160
1.5-2.5
7
XGJ850
220
2.5-3.5
14.5
XGJ880
315
4-5
18


Greatly welcome to mail me asking for details, best regards

Contact person : Litearn Liu
M.P:86-18678866207
T.P:86-531-83483996
FAX:86-531-83483378