CNC Engraver SHG1212 (Dual Heads)

This CNC Engraver work at the same time and can work separately. It is mainly used for wood working factory .
CNC Engraver with dual heads:
Functions:
These two heads can work at the same time and also can work separately. We use two different control systems. It can do double work than one head. This machine is mainly used for wood working. You can do engrave on the wood, artificial marble and similar materials.
PARAMETERS
NO.
Description
Parameter
1
X,Y,Z Working Area
1200X1200X120mm
2
Table Size
1350X1350mm
3
X,Y,Z Traveling Positioning Accuracy
±0.05/300mm
4
X,Y,Z repositioning Positioning Accuracy
±0.05mm
5
Table surface
T-slot Extrusions
6
Frame
Cast Steel
7
X-Z Structure
Hiwin Ball Screw
8
Y Structure
Screw Ball and Hiwin Rail Linear Bearings
9
Max. Power consumption (Without spindle)
1.8Kw
10
Max. Rapid Travel Rate
10000mm/min
11
Max. Working Speed
6000mm/min
12
Spindle Power Motor
0.8Kw self cooling spindle
13
Spindle Speed
0-24000RPM
14
Drive System
Stepper system (Option: servo system)
15
Working Voltage
AC220V/50/60Hz (Option: 380V)
16
Command Language
G code
17
Operating System
DSP System (Option: Mach3 PC Software))
18
Interface
USB
19
Flash Memory
128M(U Disk)
20
Collet
ER16
21
X-Y Resolution
<0.02mm
22
Software compatability
Wentai software, Type3 Software
(Option: Artcam Software)
23
Running Environment
Temperature: 045
Relative humidity: 30%75%
24
Packing Size
Seperated: 3050X1850X1000mm
Integrated: 3050X1850X1450mm
25
Net Weight
450KG
26
Gross Weight
600KG
All parameters above subject to change without prior notice