Friday, August 5, 2011

Plywood Machine

Plywood Machine
The conveyor belt connect with veneer peeling lathe, it can do the long-distance transportation.
Type
Max.Cutting Length
Max.Cutting Thickness
Max.Cutting Width
knife’ s Motor Power
Roller’s Motor Power
SLC1400C
1400mm
≤3.2mm
<1400mm
1.5KW
1.5KW
Type
Total Power
Power
Outer Measure
weight(kg)
SLC1400C
3KW
380V±5%.50Hz
2570×1920×1100mm
1000KG
Primaryfeatures
1.Equipped with Servo Control System2.Cut different length veneer, the board quickly cutted at the beginning,then back to cut the normal setting board.The automatic conversion,for which the end long board is cutted into short one,can be adjustable.3. With the veneer peeling lathe synchronization production, and they form the production-line.4. The depth of cutting board is between 0.5mm-4.0mm, no adjustment.5. The conveyor belt connect with veneer peeling lathe, it can do the long-distance transportation.6. the error of board’s width is 1.5mm, that of board ‘s parallelism is only ±1mm. it’s precision is much better than manual labour.
Product brief introduction
The machine is fit for automatic venneer cutting for the plywood factory or wood processing factory. When continuous peeling veneers of spindleless peeling machine go into rack through a conveyor belt , with the chain transmission between the veneer pressing rack and veneer feeding rack,the veneers go into cutting place.The peeling knife will cut the veneer automatically.The cutted veneer will be sent from the rack to complete the whole process.

No comments:

Post a Comment