Plywood hot press machine

1, plywood hot press machine
2,hot platen :3200*1400*42
3,cylinder :3* diameter260mm
4,composite frame easy for transport
400T 8 LAYERS HOT PRESS
Device type
BY21-3200×1400/40-8
Quantity and diameter of cylinder
3 unitsΦ260mm
Stroke of cylinder
1050mm
produced place of cylinder
Wuxi ,china
Hydraulic system
Microcomputer manually/automatic controlled
Hydraulic system compression resistance
25MPa
Main motor
11KW
Pressurized motor
5.5KW
Main pump
shanghai aviation 250pump
pressurized pump
10ml/rev plunger pump
Integral quality drilling board
3200×1400×42mm
produced place of drilling board
kunshan ,china
Separation between layers
120mm
Dimensions
4060×1400×4210mm
Width of plate main frame
40mm,22mm,10mm
Thickness of upper and lower crossbeams
900,900,400mm


The feature of our hot press :
The cylinders we use are from Wuxi top three brands, and guaranteed one-year after-sale service;
The hot platens we use are from Kunshan Guangqi---best in quality and largest in output. The platens are produced on high precision machine tool. Three features of the platen: precision in thickness: all 0.5mm; flatness 0.5mm; surface finish 1.6.
The main frame has improved over 20 items, among which the most outstanding items are:
a) The vertical shaft was used H model, inner support moved 20cm inward; the semicircle beneath the inner support moved up 30cm, thus decreased the moment and increased the security of the vertical shaft.
b) The whole frame is made of imported steel plate. An R-shaped arch is added on the spot of largest moment force of the frame, thus strengthened the security of the frame.
c) The movable crossbeam is assisted with a precision guide to keep pace with the cylinder.
d) The slideway is fastened with CL.8.8 bolts, which are easy for replacement and destuffing and of high precision.
e) The three machining surface of the frame are qualified to produce any kind of panel.
f) The main pipe is welded together and the joints are flanged, easy to destuff.
g) The whole machine is installed without welding.
4. The hydraulic station: all the connections are connected with ball valve to prevent leakage; the seal ring can serve its whole life; copper clad motor, Shanghai 250 aviation pump (manufacture customer-made), service life is 5 times longer than the ordinary pumps while cost 3000yuan more; low noise; Rectangular one-way valve serves 3 times longer than the ordinary valve; filter through three strainers, well-sealed and less pollution.
5. To prevent vibration, the electric control box is separated from the hydraulic station and the main frame, thus prolonged the service life of the electrical components. The electrical components are of Zhengtai brand which are newly developed micro-computer controllers. They can meet the operation needs of all kinds of programs. An automatic alarm is added
Attached picture ,