Ruima Raw Wood Sawing Machine

Ruima multi blade raw wood sawing machine can quickly saw the raw wood into seven panels at one time evenly
Ruima Multi-Blade Raw Wood Sawing Machine

Model:TH-1430

1.Structure and features of the raw wood sawing machine
. This wood sawing machine is mainly composed of frame work, feeding secion, speed adjustment section, wood pressing secion, air pressure system and electric contorl system.
. Length of the wood can be from 500mm to 5000mm.
. Backstop claw at the feeding point can avoid the splashing out of the wood.
. Two wheels in one set for the upper pressing wheel.
. The pressing power in the wood fixing part can be adjusted with the adjustable cylinder.
. Frequency control is adopted in the wood feeding section. The max. productivity can reach 3CBM/h.

2.Operation cautions of the raw wood sawing machine
. Before starting the machine, make sure that the saw blades are fixed tight, rotation in the right direction, metal case door closed and exhaust pipe connected.
. Ensure the reducer tank of the feeding section has been filled engine oil and keep the oil at the required level. To avoid damage, the reducer can’t be runned without lubricant.
. Ensure the air pipes connectors are fixed and the voltage of power and air supply reaches the requirement.

3.
Structure and operation of the wood sawing machine

. Max.working width: 300mm
. Min.working width: 150mm
. Max.working height: 300mm
. Min.working height: 150mm
. Min.sawing length: 800mm
. Max.sawing length: no limitation
. Navigation motor power: 1.1kw
. Feeding motor powder: 1.1 kw
. Main electric motor power:upper saw 30kw ,bottom saw 30kw
. Total motor power: 62.20kw
. Feed speed: stochastic change(5meters per minute usually)
. Saw Dimension:405×3.2×60×30T
. Overall dimension:6000MM×1500MM×1800MM
. Weight: 3500kg