QSG1100R-P Wide Belt Sander

This machine is a CNC made wide belt sander, it has two abrasive belt for sanding plywood board, solid wood, mdf and so on.
Q series machines are our new developed high precise sanding machine. Machine frame is jointed by high rigidity screws, stability and without distortion.
Working width
40-1100mm
Working thickness
3-150mm
Feeding speed
6-30m/min
First belt speed
22m/s
Second belt speed
11.5m/s


Abrasive belt size
1130×2620
Conveyor belt size
1110×4000
Motor power
35.94KW
First belt motor power
22KW-4P
Second belt motor power
11KW-4P


Feeding motor power
2.2KW
Rise and decline motor power
0.37KW
Brush motor power
0.37KW
Working pressure
0.4-0.8 Mpa
Consumption of compressed air
1.5m
3
/min
Average speed of sucked air
25-30m/s
Overall dimensions
2530×1720×2250
N.T.
3000KGS


















Best accessories:
Stamping parts are accomplished by numeral control center are sprayed with plastic powder.

Employ high rigid screws connection to improve the precision of the frame, and avoid the welding deformity

Automatic brake and working table decline for belt breakage, miss track and power failure.

Taiwan TAIAN electric parts, long life and stability

Protection device to stop over thickness working piece into the machine, this can protect the working piece and operator

Sanding roller united with pulley as one body to pass the dynamic balance test to ensure high precision

Tape strap pulley are easily dismountable and with stable performance.

In-feed and out-feed conveyor tables are suitable for long pieces sanding

Imported Germany no joint OPTI V-belt and no vibration when operating and is with long life

Variable feeding speed

Trapezoidal thread for rise and decline system is stable and long life

Air jet blower can clean the sanding belt and extend belt life, to improve sanding precision (Optional device)

Vacuumed conveyor table for thin boards sanding(optional device)

Tower-type press rollers structure to make sure the stability of the boards during sanding, could be better to polish the curve and deformed boards

Machine girder is made of high quality manganese steel, higher bending resistance, to improve the running stability of the sanding roller ensure the sanding precision.

The press rollers close to the sanding roller maximumly, is suitable for short pieces sanding