Laminating machine

Laminating machine
1.PLC control
2.Compact structure, reliable, simple operation, convenient maintenance.
Laminating machine presses the decoration paper, PVC template or wood slice onto the wood-based panel (including calcium silicate board, particle board, plywood and MDF).


Main features
1. Make use of PLC human-computer interface control, safety and reliably, and the pressure curve control accurately.
2. Hot-press frame with reasonable design is used with, is welded using the carbon dioxide gas from the domestic well-known & good-quality stainless and process the three working-faces on Plano miller.
3. Adopts the secondary recycling control system for controlling the temperature of top and bottom hot plate.

Main Technical Data
1 Finished size of normal lamination (8~40)×1830×2440mm
2 Pressing cycle According to technological request
3 Specific pressure 16000KN
4 Unit pressure ≤35kg/cm2
5 Size of heating plate 2000×2600mm
6 Daylight opening: 280mm
7 Main cylinder(diameter×stroke): 260×280mm 12 units
8 Pressure of hydraulic system: ≤25MPa
9 Temperature of heating plate: ≤210
10 Temperature control of heating plate: Digital indicator
(Include secondary recycling temperature control system
11 Temperature controlling of heating plate: ±1
(Upper and Lower heating plates are controlled separately)
12 Working method of loading machine: Belt loading
13 Speed of loading/unloading machine: 30m/min
14 Controlling system of whole wires: PLC
15 Closing time of the press: ≤2s
16 Lifting time of the press ≤2s
17 Pressing time of the press ~1.5s
17 Arrangement of energy 30×104 kcal/h
19 Heating media of heating plate Thermal oil (Boiler prepared by user self)
20 Net weight of the equipment 64800kg
21 Size of the line(Length×Width×Height) 24100×10700×3950mm
(Above the ground)
Economic and technical parameters
22 Total power 66kW
23 Compressed air arrangement 1.2m3/min 0.6Mpa
(Compressed air prepared by user self)
24 A Short Cycle Process ~55s ,per keeping pressure time 30s