1300 Electronic Piano Key Type Sanding machine

Piano Key Sanding Machine
Model S1300R-TSE
Usage: Applied in the plywood,painting surface,paneled doors with Uneven thickness
Name:Piano Key Sanding mahine
Model: S1300R-TSE.
Pass CE Certificate
Usage: Applied in the plywood,painting surface,paneled doors with Uneven thickness
Standarded configuration:
the operation width is all controlled by computer , the width can set up by yourself , high accuracy and steability.
the feed inlet is equipped with 44 check point devices, which is from Omron (Japan ) .
44 piano key units is controlled by 44 accurate cylinder elements which is imported .
the swing of the sand belt is controlled by cylinder,make sure the swing is steady and even . which can keep the device from the dust and out of the power .
the machine is equipped with multi-loop trouble display device .
the electronic coder (Japan ,Omron ) cooperates with the computer , the coder can record the speed of feed automatically , and make both the front rollerand the piano key board shift with the material automatically . the coder helps to solve the problem of missing the initial and ending of material .
the handing plate and the pressing roller are made of casting iron ,minimizes the noise and maximized the stability .
The main power moter is started on the model of triangle automaticly
the conveyor table is adopted trapezoidal lead screw , high accuracy , little noise .
10. the sanding belt is adopted automatical blowing device , length the life of the sand elt ,raise the quality of the sanding plate .
11. the bears are imported from Japan NSK , the electronic pneumatic elements is from France .

12. the electronic device is controlled by PC device ,which is from French Schneider and Japan Omron .
13. the whole big frame is made of steel , welding and pressing .
14. the conveyor table is vacuum table , it can make the small or smooth works more accutate .
15. the piano key sand belt can used both sides according to the surface of the normal plate and the paint plate .
Technical data :
Operation width : 1300mm
Material thickness : 3-110mm
Min operation length : 480mm
The speed of first sand belt: controlled by inverter
The speed of second sand belt : controlled by inverter
The size of sand belt : 1330*2620mm
The speed of feeding : 5-20m/min
The power of conveyor motor : 4kw
General motor power : 24.94kw
Working pressure : 0.4-0.8Mpa
Consumption volume of compressed air : 18m
3
/h
Dust-absorption capacity: 9000 m
3
/h
Machine size: 2750*2150*2200mm
Weight 3600kgs