Wood Sawdust Pallet Feet Maker SMS: 0086-15890650503

Wood Sawdust Pallet Feet Maker
1. Used to make pallet block;
2. Good performance;
3. Long service life
Wood Sawdust Pallet Feet Maker
1. Used to make pallet block;
2. Good performance;
3. Long service life
Emily, 0086-15890650503

Brief Introduction of Wood Shavings Sawdust Pallet Block Making/Forming Machine/Pallet Feet Making Line
1.
The production line is mainly
made up of
Crusher, Dryer, Gluing Machine, Press Machine and Saw
to cut the block piece by piece.
2.
The raw material is sawdust, wood shavings, waste wood, used pallet and so on
. If the raw material size is not very big we do not suggest crushing first.
3. The pallet block's size can be made by customer's demands. The end product is with a hole inside.

Main Parameter of Press Machine
Model
TYD-100(Single Heads)
TYF-150(Double Heads)
Specification of blocks
Height: 75-145mm Width: 75-145mm
Power
20.3Kw
13Kw
Glue water amount used
200-240kg/m3
100-120 kg/m3
Supports the density
550-600kg/ m3
Capacity
4m3/24h
2 m3/24h
Warm prosecution type
PID adjusts the merit accent to press the control
Voltage
380V 50Hz
Weight
1500kg
1000Kg
Dimension
5000*700*1300mm
5000*600*1300mm
Remarks: We can make the extruding moulds as your requirement, the max one is 145*145mm

Pictures of Machine:



Information about Final Block:
It conforms to the European Tray Association the load-bearing wooden block's manufacture instrument of ratification stipulation which is made by the wooden dregs board (the load-bearing wooden block specification 100mm*145mm diameter not to be able to surpass 32mm, the 145mm*145mm diameter not to be able to surpass 40mm). State Forestry Bureau East China lumber and wood ware quality surveillance test center check result:
Formaldehyde release quantity (mg/100g): 21.4 conform to E2
Grasps the bolt strength (N): 980
In bonding strength (Mpa):1.76



Pallet Block Usage:
The pallet block can be used for transportation, export packing and so on. International standard size is 90*90mm, 100*100, 90*100mm and so on. We can make the extruding mould as your requirements. Max size is 145*145mm, and generally the hole is 8%-10% of the whole area.


Contact Details: