melamine short cycle hot press

melamine short cycle hot press
1.PLC control
2.Reducing labor
3.Shortening producing cycle of product
4.Register embossing
melamine short cycle hot press
The decoration paper, PVC template or wood slice onto the wood-based panel (including calcium silicate board, particle board, plywood and MDF).

Main features
1. Make use of PLC human-computer interface control, safety and reliably, and the pressure curve control accurately.
2. Hot-press frame with reasonable design is used with, is welded using the carbon dioxide gas from the domestic well-known & good-quality stainless and process the three working-faces on Plano miller.
3. Adopts the secondary recycling control system for controlling the temperature of top and bottom hot plate.
4.be matched the cupula conveyor for the foundation board, positioning accuracy. also can be matched automatic trimming, turning board for cooling, automatic stacking, inspection and so on.


Technical date of equipment :

No.
Name
Parameter
1
Finished size
8~402120×2850mm
2
Pressing cycle
According to technological request
3
Consumption of the heat
0.47MW (40×10
4
kcal/h)
4
Specific pressure:
24000KN Specific pressure 40kg/cm
2
5
Size of heating platen
2260x3000mm
6
Daylight opening
300mm
7
Main cylinder (diameter×stroke)
380×300mm 9units
8
Pressure of hydraulic system
≤25MPa
9
Temperature of heating platen
≤210
10
Heating medium
Heating oil
11
Lifting time of the press
≤2.5s
12
Net weight of the equipment
110000kg
13
Size of the line (Length×Width×Height):
60000×18000×5600mm