wooden working cnc router machine

FANCH new type:1.Italy spindle 9KW ATC 2.dust prevention 3.vacuum adsor 4.skew pinion & rack 5.Self-oil system 6.servo motor
FC-1325MHZ
(NEW)IN LINE ATC MACHINING CENTER

Scope of application:
Our products have been widely applied in industrial board cutting, mould manufacturing & processing, wooden products processing, building decorating & furnishing, stone, glass, copper, aluminum and advertising products processing, etc.
Features of the machine:
1,lathe adopts square frame industrial structure design, gantry, upright, support plate, pulley, tool rest, using aluminum cast process
2. complete machine adopts imported Japan YASKAWA servo high power drive system.
3. Taiwan planetary reducer system, high precision & high pulling torque.
4. pinion & rack transmission, adopts original imported skew pinion & rack transmission.
5, Standard in line 6 tool changes, aluminum casting tool rest, standard original Taiwan BT30 tool holder.
6. ATC spindle adopts domestic HD 5.5kw water-cooling spindle, tool changing time about 6 seconds
7. Motion control system adopts Taiwan SYNTEC special numerical control system.
8. Driving rail adopts original Taiwan imported 25mm square lead rail.
9. Z axis adopts Taiwan TBI original coarse pitch precise rubbing screw rod, high precision transmission
10,Unique Z axis feeding height 250mm, can be suitable for complicated workpiece machining.
11, Imported spindle high performance transducer, high frequency electronic anti-jamming system.
12, Patent design cavate vac-sorb table, minimum adsorb area: 150*150mm, can absorb & clamp.
13, vac-sorb 5.5kw air-cooling oil free vacuum pump, subatomospheric pressure can reach 0.8Mpa
14, standard industrial three axis dust prevention design processing, make whole transmission structure avoid the damage from dust.
15, Self-oil system for the transmission part of the complete machine, extend the service life for each parts.
16, cable adopts YC numerical control machine shielding line, can reciprocate twelve million times.
17,equipp with standard America industrial aviation plugs links, soft metal cable sheath, avoids the cable damage situation from the press & bump effectively.

Technology Parameter
Work travel
1300*2500mm
Feed-in height
250mm
Resolution
0.025mm
Spindle power
5.5kw
Work voltage
AC380V/50Hz
Idling speed
60m/min
Spindle rotating speed
6000-18000rpm/min
Cutter diameter
3.175 4 6 12.7
Command code
G code.uoo.mmg.plt
Adsorb power
5.5KW
Cutter control pressure
0.7Kpa
Work mode
AC servo

New Cylinder cnc router with 8spindles