wide-belt double-unit sanding machine

sanding machine
The machine consists of frame, feeding device, lifting device, electrical device and automatic control device.
Woodworking machine
Sanding machine
Wide belt sander
Stander sander
1.This machine can be used to do strong thickness sanding and polishing various board such as solid wood door, veneer board, shaving board, cement board ,fibre board ,middle-density fibrous board,frame etc. 2. The machine consists of frame, feeding device, lifting device, electrical device and automatic control device. 3.It has two thickness rollers and one sanding pad.The sanding pad can work independently,making the surface much fine and keep higher effiectly
Technical Data:
1. The feeding belt come from Holand AA belt.
2. The bearings come from Japan NSK
3. Electric parts select Taiwan AIRTAC, Siemens,Chengtai.
4.The machine electronic control have overload, with low pressure, flow, defaultphase protection, if any above fault arise , equipment will be automatically stop, and emergency braking, to get the best production safety protection.
5. If the conveyor belt pulling to one side ,it will be automatic centering , doesn’t need manual adjustment.
6. Table lift control mode: microcomputer automatic control lifting.
7. Feed belt speed regulating mode and scope: stepless speed adjustment, for 3-30 / min.
8. Dust collection mouth diameter: Φ200 four, Φ150 one
9. Working pressure: > 0.55 MPA, dust collection average speed: 25m/sec.

Model No.

BSG2213
Working Width
1300mm
Working Thickness
2.5-80mm
Size of Abrasive Belt (W*P)
1320*2200mm
Working Air Pressure
0.5MPa
Abrasive Belt Speed
20,18m/s
Feeding Speed
4-30m/min
Total Motor Power
56.62kw
Overall Dimensions (L*W*H)
2100*2530*1980mm
Net Weight
3400kg