slat finishing machine

Wood Slat Finishing Machine.
ROLLER COATER

FEATURES:
1. The machine adopt a mechanic spreading that can be achieved the required spreading effectively and perfectly, with tremendous amount of time and labor saving.
2. The machine is equipped two sets of UV spreading rollers; and can be employed in dual or single by operator's selection.
3. Fast and convenient replacement of spreading rollers of the machine can be achieved by simply loosening the screws that tighten the spreading rollers. This enable a less effort and time saving performance.
4. The machine is capable of rapid and convenient UV spreading material recollecting.
5. The machine is furnished with a linear speed meter. The feeding speed of the machine can be adjusted in accordance with the spreading speed.
6. This machine is suitable for coating veneer board, plastic injected and extruded door, rubber, wall panel, and etc., after the specific spreading application is determined
Model
Spreading
Speed
Eff.spreading
Width
Spreading
roller size
Power
Voltage
Machine size
Measurement
N.W.
G.W
TP-520
0-60m/min
420mm
Ψ150×520mm
2HP
220V
380V
440V
Customer
specify
on repuest
2100×1600×1200mm
2200×1700×1400mm
1200kg
1600kg
TP-720
0-60m/min
600mm
Ψ150×720mm
2HP
2100×1800×1200mm
2200×1900×1400mm
1400kg
1800kg
TP-1000
0-40m/min
900mm
Ψ150×1000mm
3HP
2100×2100×1200mm
2200×2200×1400mm
1500kg
2000kg
TP-1400
0-40m/min
1300mm
Ψ150×1400mm
3HP
2100×2500×1200mm
2200×2600×1400mm
1600kg
2200kg